This appendix discusses some common installation problems you could encounter and provides solutions to these problems.
If you receive a fatal signal 11 during your installation, it is probably due to a hardware error in memory on your system's bus. A hardware error in memory can be caused by problems in executables or with the system's hardware. Like other operating systems, Red Hat Linux places its own demands on your system's hardware. Some of this hardware may not be able to meet those demands, even if they work properly under another OS.
Check to see if you have the latest installation and supplemental boot diskettes from Red Hat. Review the online errata to see if newer versions are available. If the latest images still fail, it may be due to a problem with your hardware. Commonly, these errors are in your memory or CPU-cache. A possible solution for this error is turning off the CPU-cache in the BIOS. You could also try to swap your memory around in the motherboard slots to see if the problem is either slot or memory related.
For more information concerning signal 11 errors, refer to http://www.bitwizard.nl/sig11/.
If you are experiencing difficulties in getting the network boot disk you made to boot your system correctly, you may need an updated boot disk.
Check the online errata for updated diskette images (if available) and follow the instructions provided to make an updated boot disk for your system.