return to first page linux journal archive
keywordscontents

Linux Gazette

Tips from The Answer Guy

Learn how to block unwanted mail and tighten your security from Linux Gazette's Answer Guy.

By James T. Dennis

Netscape Mail Block

I need to refuse to accept e-mail from a particular person. How can I configure Netscape and/or CND1.0 to bounce the person's mail back to them?
--
Mitch, Mobile, Alabama

And the Answer Is...

I'd use procmail, a little programming language written specifically for processing mail. CND uses procmail as the ``local delivery agent'' by default. This means that sendmail passes any mail for a local account to procmail, and then lets procmail do the final delivery to your mail box, /var/spool/mail/your_login_name. At the same time, procmail checks for a .procmailrc file in your home directory, and does some ownership and permissions checks on it for you.

The author of a .procmailrc file can specify a variety of settings and clauses which are called ``recipes'', and can also modularize the file by using a variety of INCLUDE directives. Here's a simple example that should get you started:

:0 hr
* ^From.*spammer.you.despise@spamhaven.com
* !^FROM_MAILER
* !^FROM_DAEMON
* !^X-Loop: ${USERNAME}i@`hostname`"
| (formail -r -A"X-Loop:
${USERNAME}@`hostname`" \
-A"Precedence: junk";\
   echo "Your mail is not welcome here."\
   echo "Please don't mail me again."\
   echo\
   cat ~/your.signature.or.flame
)
The :0 marks this as a new recipe--each new recipe starts with this line. The h and the r on that line are flags tell procmail which parts of the message to hand to your action line (i.e., the one that starts with a pipe, |).

The r flag is given to prevent your response from failing if the sender has failed to put a blank line at the end of his message.

The following four ``star'' lines in the script are conditions. The first specifies that the header will show that the message is ``from'' your spammer, that is, your unwanted sender. This address will exactly match any ``from'' or ``From:'' line that contains your target e-mail address. The next two lines of the script ensure that you don't respond to daemons and mailers (mailing lists). The last * line, which you should fill in with your user name and host name, ensures that your don't respond to your own response. Those three conditions are included to protect your script from being tricked into undesirable actions. Consider them to be the minimum overhead on any auto-responders that you write.

The next line of the script, which starts with a ``|'' pipe character, describes the action to take. In procmail there are three types of actions:

  1. A file name specifies an mbox (elm, pine or mailx compatible) folder in which to store the message.
  2. A directory name specifies an mh or mmdf folder for mail storage. mh and mmdf use different naming schemes for the messages in their folder directories, but you don't need to worry about this difference unless you use one of their mail user agents.
  3. A ! (bang) line specifies an e-mail address to which the message is to be bounced. A | (pipe) line specifies that the message is to be filtered through a local program.

formail is a program that comes with the procmail package. It ``formats mail headers''. This particular formail command formats a ``reply'' (-r) header, and adds two additional header lines--a standard ``Precedence: junk'' line and a personal ``X-'' line. The RFC822 spec allows you to use the X- line to embed custom information into a header. It is also in the formail command line that you prevent an attack by routing your response back into your own script, i.e., a mail loop.

The echo and cat statements after the formail line provide output that is appended after the mail header and that becomes the body of your response. You can add additional echo lines or you can create a file and use cat to add it here.

If you are new to procmail (which is almost certain given your question--auto-responders are some of the first things that procmail users learn), you may be nervous about breaking something and losing some of your mail. To protect yourself you will want to start your .procmailrc with the following simple recipe:

:0 c
fallback
This recipe, if it is the first recipe in the script, appends a copy of every incoming message to a file named fallback in your ~/Mail directory by default. You can compare the contents of that folder to your inbox until you are confident that everything is working as you expect.

Please read the procmail and procmailex (examples) man pages for more details. The author, Stephen van der Berg, has also written an automated mail list management package called SmartList that is highly regarded among people that I know who have used it. I like SmartList much better than Majordomo.
--
Jim

Dealing with E-mail on a POP3 Server

Is there any way (or any program out there) which will not only get my e-mail from a POP3 server off of one account, but distribute it to multiple users on my system by either the from: or subject: lines?

Perhaps popclient could get the mail and save to temp. Then a program could go through the saved mail and say, ``Hmmm, this mail is from johndoe@linux.org and it goes to root--then the next message is from mike@canoe.net and it goes to Dave.'' Is there a program that will do this?
--
Moe Green, starved@ix.netcom.com

And the Answer Is...

It is possible to write procmail scripts that can take this sort of action for you. Although I don't recommend this approach, I'll tell you how to do it.

The current version of popclient is called fetchmail, because it supports IMAP and some other mail store and forward protocols. The fetchmail default is to fetch the mail from your POP or IMAP server and feed it to the smtpd (sendmail) on your local host. This means that any special processing that would be done by the aliases or .forward files (especially any processing through procmail scripts) will be done automatically.

It is possible to override that feature and feed the messages through a pipe or into a file. It is also possible, using procmail or any scripting language, to parse and dispatch the file. Using anything other than procmail would require that you know a lot about RFC822, the standard for Internet mail headers, and about e-mail in general.

I wrote an article on procmail that appears in February's Linux Gazette, Issue 14. The gist of it is also available on my own mail server, and can be obtained by sending mail to info@starshine.org with a subject of procmail or mailbot.

The reason I don't recommend using procmail in this way is that it violates the intentions and design of Internet e-mail. A better solution is to find a provider of UUCP (Unix-to-Unix CoPy) services or at least SMTP/MX (Simple Mail Transfer Protocol) services. UUCP is the right way to provide e-mail to disconnected (dial-up) hosts and networks. It was designed and implemented over 25 years ago, and all of the mail systems on the Internet know how to gateway to UUCP sites.

As for SMTP/MX services for disconnected hosts/networks, there are various ways of hacking sendmail and DNS (Domain Name Service) configurations that have been developed in the last few years with a variety of shell scripts and custom programs to support them. All of these methods provide essentially the same services as mail via UUCP over TCP but do not conform to any standard, which means that whatever you learn and configure with one ISP probably won't work with the next one.
--
Jim

Security Problem

Recently a cracker got into my Linux system on the Internet. He didn't do a lot of damage, but I guess he did turn off system logging, since I couldn't see what he'd done. Now I can't get it working again. Here's what I've done so far:

  1. I've made sure that the syslogd program is running using ps.
  2. I've read the syslogd.conf file to make sure it's logging everything, and where it's going to.
  3. I've checked permissions on the log file.
  4. I did a kill -HUP on the syslogd process, and it writes restart to the log.
  5. logger does nothing when I run it (no log entry, no error).
  6. All my C programs that wrote to syslog don't anymore.

Anyone have any good ideas what to do from here?
--
Jay
jay@shadow.ashpool.com

And the Answer Is...

I do, but they are rather too involved for me to type up tonight. However, I highly recommend that you reinstall the OS and all binaries from scratch whenever you think root has been compromised on your system. I realize this is a time-consuming proposition, but it is the only way to truly be sure.

I also recommend the program tripwire that can be found at ftp.cs.perdue.edu in the COAST archive, and its mirrors.

Please feel free to write me at jimd@starshine.org if you continue to have system security problems.

Sorry to take so long to respond. I've been literally swamped all month.
--
Jim

More on Security

I found that the cracker had replaced my syslogd with a packet sniffer. I think he had copied the syslogd code and replaced parts of it with his sniffer. It seemed to have some functionality but not a lot...

I also found a SUID version of bash in my /tmp directory. My thought is this is the way he originally got root access.
--
Jay

Not too surprising. He was probably using a rootkit; however, he obviously didn't do a very good job of covering his tracks. You should consider all passwords for all of the systems on the local net to be compromised. Force password changes across the board and consider installing ssh or stelnet. Both are secure, encrypted replacements to rlogin/rsh and telnet respectively.

He probably got in through the ``Leshka'' sendmail bug that allows any shell user to create a root-owned SUID shell in /tmp/ on any system that has an SUID root copy of sendmail (version ~8.6.x to 8.7.x ?). The bug involves sendmail's handling of ARGV[0] and it's subsequent SIGHUP (signal to disconnect) handling. Everyone using earlier versions of sendmail should upgrade to 8.8.3 or later (see http://www.sendmail.org/ for details).

How important are this system and the other systems on the same LAN segment to your business? I'd seriously consider hiring a qualified consultant for a full day risk assessment and audit. Unfortunately, you'll probably pay at least $125/hr for anyone that's worth talking to, and many of the ``security consultants'' out there are snake oil salesmen, so beware.
--
Jim

Jim Dennis is the proprietor of Starshine Technical Services. His professional experience includes work in technical support, quality assurance and information services (MIS) for software companies like Quarterdeck, Symantec/Peter Norton Group and McAfee Associates--as well as positions with smaller VARs. He's been using Linux since version 0.99p10 and is an active participant on an ever-changing list of mailing lists and newsgroups. He's just started collaborating on the 2nd Edition for a book on Unix systems administration. Jim is an avid science fiction fan--and recently got married at the World Science Fiction Convention in Anaheim.

This article was first published in Issue 14 of the Linux Gazette. a free on-line e-zine published by Linux Journal. Linux Gazette can be found at http://www.ssc.com/lg/.