Linux Gazette... making Linux just a little more fun! Copyright © 1996-98 Specialized Systems Consultants, Inc. _________________________________________________________________ Welcome to Linux Gazette! (tm) _________________________________________________________________ Published by: Linux Journal _________________________________________________________________ Sponsored by: InfoMagic S.u.S.E. Red Hat LinuxMall Linux Resources Mozilla cyclades Our sponsors make financial contributions toward the costs of publishing Linux Gazette. If you would like to become a sponsor of LG, e-mail us at sponsor@ssc.com. Linux Gazette is a non-commercial, freely available publication and will remain that way. Show your support by using the products of our sponsors and publisher. _________________________________________________________________ Table of Contents December 1998 Issue #35 _________________________________________________________________ * The Front Page * The MailBag + Help Wanted + General Mail * More 2 Cent Tips * News Bytes + News in General + Software Announcements * The Answer Guy, by James T. Dennis * Basic Emacs, by Paul Anderson * Creating A Linux Certification, Part 3, by Dan York * 1998 Editor's Choice Awards, by Marjorie Richardson * Happy Hacking Keyboard, by Jeremy Dinsel * Getting Started with Linux, by Prakash Advani * The GNOME Project, by Miguel de Icaza * IMAP on Linux: A Practical Guide, by David Jao * Linux Installation Primer, Part 4, by Ron Jenkins * Linux - the Darling of COMDEX 1998?, by Norman M. Jacobowitz * My Hard Disk's Resurrection, by René Tavera * New Release Reviews, by Larry Ayers + Two Small Personal Databases for Linux * Product Review: Partition Magic 4.0, by Ray Marshall * Quick and Dirty RAID Infromation, by Eugene Blanchard * The Back Page + About This Month's Authors + Not Linux The Answer Guy The Muse will return next month. _________________________________________________________________ TWDT 1 (text) TWDT 2 (HTML) are files containing the entire issue: one in text format, one in HTML. They are provided strictly as a way to save the contents as one file for later printing in the format of your choice; there is no guarantee of working links in the HTML version. _________________________________________________________________ Got any great ideas for improvements? Send your comments, criticisms, suggestions and ideas. _________________________________________________________________ This page written and maintained by the Editor of Linux Gazette, gazette@ssc.com "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ The Mailbag! Write the Gazette at gazette@ssc.com Contents: * Help Wanted -- Article Ideas * General Mail _________________________________________________________________ Help Wanted -- Article Ideas _________________________________________________________________ Date: Sun, 01 Nov 1998 21:08:28 -0800 From: Ted, brwood@worldstar.com Subject: printing issues as users I have the following problem that nobody seems to give me a good answer to. If I print as root, everything is good. If I try to print as a user I get "lpr: connect error, permission denied" "jobs queued, but daemon could not be started' This is under Red hat 5.1. Any tips ? -- Ted Brockwood _________________________________________________________________ Date: Mon, 2 Nov 1998 19:34:49 GMT FROM: richard.c.hodges@lineone.net SUBJECT: Help Wanted! I have a PII (350MHz) running with an AGP ATI 3DRage graphics card (which works fine) and a Sound Blaster 16 PnP (which also works fine). But, I'd be buggered if I can get my internal SupraExpress 56k modem to work. I have set the port (cua2 - COM3 in Windows) to IRQ11 (as it is under Mr. Gates' OS) and the memory but it won't work. I tried changing the modem initialization strings and still nothing. Minicom says that there is no connection (!?). If someone can help me, I would be most grateful as I want to use Netscape under X because I want to use less of Windows because it's no good and expensive and hey, who likes expensive stuff eh? Thanks for your time -- Richard Hodges _________________________________________________________________ Date: Tue, 3 Nov 1998 11:47:43 +0100 From: Carlo Vinante, Vinante@igi.pd.cnr.it Subject: K6-2 Troubles on Linux First I would thanks all the people and Linux Gazette who answered me in a my previous mail. I've another request to do now ..... that is : I've upgraded my system from a K5 @ 133 MHz to a K6-2 3D @ 266 MHz processor ... and, as wrote on the Linux HOWTOs "... with the older version of K6 we have to disabled the cache memory ... ". So, my fault was that I didn't read the HOWTO prior to buy the new processor, but I'm asking to myself if "... is really a K6-2 an "older" version of K6 family ... " ? The system runs anyway, but is a 'little slow' :-( Is the cache disabling the only way to fix this problem ? If not, which kind of K6, I can 'safely' use ? Thanks in advance to all the Linux people. Have Fun :) -- Carlo Vinante _________________________________________________________________ Date: Tue, 03 Nov 1998 12:51:31 +0530 From: Prakash Advani, prakash@bom5.vsnl.net.in Subject: Questions I'm interested in setting up Sendmail so that it routes mail over the Internet for users who are not on the system. What I have done is setup a Web site and a Linux server on my Intranet. Both have the same domain name. I can download mail and distribute it internally using fetchmail and procmail. I can also send mails to users on the Internet as well as users within the network. What I would like Sendmail to do is check if the user is a valid user on the system. If so it should deliver the mail internally, otherwise it should route the mail over the Internet. Any help would be greatly appreciated. -- Prakash _________________________________________________________________ Date: Wed, 04 Nov 1998 19:01:02 +0000 From: Roberto Urban, roberto.urban@uk.symbol.com Subject: Help Wanted - Installation On Single Floppy My problem seems to be very simple yet I am struggling to solve it. I am trying to have a very basic installation of Linux on a single 1.44MB floppy disk and I cannot find any documents on how to do that. My goal is to have just one floppy with the kernel, TCP/IP, network driver for 3COM PCMCIA card, Telnet daemon, so I could demonstrate our RF products (which have a wireless Ethernet interface - 802.11 in case you are interested) with just a laptop PC and this floppy. I have found several suggestions on how to create a compressed image on a diskette but the problem is how to create and install a _working_ system on the same diskette, either through a RAM disk or an unused partition. The distribution I am currently using is Slackware 3.5. I would appreciate every help in this matter. -- Roberto Urban _________________________________________________________________ Date: Sat, 07 Nov 1998 13:01:39 +0100 From: Bob Cloninger, bobcl@ipa.net Subject: Dual HP Ethernet 10/100VG These are PCI controllers that seem to have some ISA characteristics. Everything I found said multiple PCI controllers could share a single driver, but that apparently isn't the case for this controller. I was never able to force the probe for the second card. The first two (alias) lines were added by the X-Windows configuration, and I added the two (options) lines to /etc/conf.modules. alias eth0 hp100 alias eth1 hp100 options eth0 -o hp100-0 options eth1 -o hp100-1 "eth1" popped right up on the next reboot. This is well documented for ISA controllers, but I couldn't find it associated with PCI anywhere. Desperation + trial and error... I'm an experienced system administrator, but new to Linux. Is this something I overlooked in the documentation or web sites? -- Bob Cloninger _________________________________________________________________ Date: Thu, 05 Nov 1998 13:45:44 +0100 From: Tony Grant, tg001@dial.oleane.com Subject: ISDN on Linux I am looking for help from a person who has an ISDN connection running on Red Hat 5.1, 2.0.35, Intel (K6 -2) with USR sportster internal card. I have managed to run ISDN on both S.u.S.E. and Red Hat but since I have upgraded my machines from P166 to AMD K6-2 300 MHz it doesn't work anymore... -- Tony Grant _________________________________________________________________ Date: Wed, 18 Nov 1998 15:33:18 -0500 From: terrence.yurejchu, ktwy@dragonbbs.com Subject: So How do I get the most from Linux I have made an extensive, and personal (money-wise) commitment to Microsoft and Windows and ... (from MS). I can say I am not entirely pleased, but then I began in the days of CP/M and never enjoyed the MS flavor to it. I like the idea of Unix/Linux but I do have all this software that is for the MSWin platform. 1. Do I have to give it all up? 2. I know that Sun had/(have) a software that enabled Unix to run MSWin software, anything like that available for Linux? Thanks, Terry Yurejchuk (There is a project called WINE that allows you to run some Windows software on Linux. Unfortunately, it's way behind. However, Corel seems to be backing getting it more up to date so this may change soon. Also, you can set up your computer to run both Windows and Linux using LILO to pick which operating system to run when you log on, or you can network the two systems using Samba. So no need to give up anything. --Editor) _________________________________________________________________ Date: Sat, 14 Nov 1998 15:56:27 -0700 (MST) From: Michael J. Hammel, mjhammel@graphics-muse.org Subject: Re: graphics for disabled In a previous message, Pierre LAURIER says: I'm just a new user of Linux, without too much time to consider learning it. I'm just having a quick question : Do you know of specific developments that have been made on X environments (KDE, GNOME or others) that are giving specific features for visually impaired people. No, I don't know of anything like this thats specifically planned for the desktop designs. - control of the pointer device with the keyboard You can do that now if you use the IBM "mouse" - the little post thats placed right in the keyboard. But that depends on your definition of "control". If what you're really looking for is to use the tab key, for example, to move from application to application then you can already do that with some window managers. Then the applications need to have proper traversal configuration (done in the source code, not from the user's perspective) to allow movement of keyboard focus within the application. - customizing the pointer with any kind of shape, color...etc Doable, but I don't know to what level KDE or GNOME supports this. It would have to be done in the Window Manager in order for it to be applicable to all applications. - features that help retrieve the cursor on the screen (key stroke, blinking etc...) I take it you mean "find it" - make it stand out visually so you can tell where its at. Again, this would be a function of the window manager. None of them currently do anything like this. At least not that I know of. - instant zooming of the screen (by function key for example) This would be a function of the X server, not the window manager or GNOME or KDE. None of the X servers have a "zoom" per se, but they all support on the fly resolution switching via the keyboard. - changing screen color/ resolution etc on the fly Resolution switching can be done with CTRL-ALT-BACKSPACE with the Xi Graphics server. I think XFree86 does the same. But with either you have to configure the server properly for this to work properly. I don't use this feature so couldn't explain how its done. By "changing color" I take it to mean the color of the background and/or borders/frames around windows. This would be a function of the window manager. CDE (a commercial environment that uses the Motif Window Manager, aka mwm) supports this. I don't think any other window managers support it just yet but they might. and I'm just here mentioning feature for disabled people, not for blind ones. But one way or the other the IT community needs to remember that computer can be a fantastic tool also for these peoples. True. The problem is finding someone who both understands what the issues are and has an interest in doing the work (or organizing the work to be done, either by the OSS community or by commercial vendors). I'm sorry I was taking this time, if you're not a person that can help here, just pass along this message to anyone that could help. I'll forward this reply to the Linux Gazette. They'll probably post it and maybe someone with better information than I will contact you. -- Michael J. Hammel _________________________________________________________________ Date: Thu, 12 Nov 1998 07:33:32 -0800 From: Sergio E. Martinez, sergiomart@csi.com Subject: article idea I'm just writing in with an idea for a quick article. I've been using the GNOME desktop. I'm a relative Linux newbie though, and I think that many of your less experienced readers could probably benefit from a short article about window managers. These are some things I currently don't quite understand: 1. Terminology: The differences (if any) among a GUI, a window manager, a desktop, and an interface. How do they differ from X windows? 2. Do all window managers (like GNOME or KDE or FVWM95) run on top of X windows? 3. What exactly does it mean for an application to be GNOME or KDE aware? What happens if it's not? Can you still run it? 4. What exactly do the GTK+ (for GNOME) or Troll (for KDE) libraries do? 5. How does the history of Linux (or UNIX) window managers compare to that of say, the desktop given to Win98/95 users? How, specifically, does Microsoft limit consumer's choices by giving them just one kind of desktop, supposedly one designed for ease of use? 6. What's happening with Common Desktop Environment? Is it correct that it's not widely adopted among Linux users because it's a resource hog, or not open source? These are some questions that might make an enlightening, short article. Thank you for your consideration. -- Sergio E. Martinez _________________________________________________________________ Date: Wed, 25 Nov 1998 08:52:09 +0200 From: Volkan Kenaroglu, volkan@sim.net.tr Subject: I couldn't install my sound card :) I am new on using Linux. Recently installed Debian 1.3 on my system both at work and home. But I couldn't install my sound-card (Opti-931) even though it says Debian 1.3 support the card. Actually during the installation it did not ask me if I've sound card on my computer. Nor dit it detect. :( Please help me. -- Volkan _________________________________________________________________ Date: Wed, 25 Nov 1998 14:27:43 +0800 From: ngl@gdd.cednet.gov.cn Subject: whether Xircom is supported? I install Red Hat5.1 in notebook computer which has Xircom card,but in Red Had5.1,no Xircom driver, I want to known whether Red Hat5.2 supports this card. Thanks! _________________________________________________________________ Date: Mon, 09 Nov 1998 17:06:47 +1300 From: Maximum Internet, lakejoy@wk.planet.gen.nz Subject: PPP Linux list We unsubscribed to the PPP Linux list but are still receiving the mail even though we received a reply saying that our unsubscribing was successful. What do we do? Thank you _________________________________________________________________ Date: Wed, 11 Nov 1998 09:56:16 +0100 (MET) From: Gregor Gerstmann (s590039), gerstman@tfh-berlin.de Subject: Linking I would appreciate, if somebody would write something about linking separately translated Fortran and C programs (don't ask me why), with 1. main in Fortran 2. main in C. Another problem is, that after some installations, at shutdown I always get: 'locale not supported by C library, locale unchanged'. Something similar I get when I translate an .rpm into an .tgz file with alien. -- Gregor _________________________________________________________________ Date: Sun, 29 Nov 1998 14:52:05 +0000 From: "Dicer", Dicer@crosswinds.net Subject: Help wanted: ATX Powerdown How is it possible to shutdown my atx-motherboard under linux instead of doing a reboot or halt? Any sources or programs known? -- Felix Knecht _________________________________________________________________ General Mail _________________________________________________________________ Date: Sun, 1 Nov 1998 20:05:53 -0500 From: Ed Roper, eroper@hrfn.net Subject: Securing your system? Regarding the article in the Nov 1998 issue of Linux Gazette, entitled "Securing Your System": What are you guys doing in the editing dept.? Since when did "TELNET" read the .rhosts file? One can accept this typo if it appeared maybe once, but it occurred several times. This is perhaps one of the worst cases of misinformation I have ever seen in a computer-related article. (Sorry about that. Perhaps you don't realize but there are no "guys in the editing" department. Articles are posted as they come without fee or warranty. If there is a mistake, someone usually lets us know, as you have, and we print the correcting letter. You are the only one who wrote about this particular article. Thanks. --Editor) _________________________________________________________________ Date: Mon, 02 Nov 1998 12:07:52 -0800 From: Dave Stevens, dstevens@mail.bulkley.net Subject: Dan Helfman I am a computer dealer with a strong interest in Unix as an operating system, in Linux as a very good Unix implementation, and a regular reader of the Linux Gazette web site. In the November issue at www.linuxgazette.com is a reference to a series of postings at http://www.nerdherd.net/oppression/9810/ucla.shtml. These postings detail an issue that has arisen with Mr. Dan Helfman's use of your residence network facilities. Not having any other information, I am proceeding on the assumption that the statements made there are accurate. If, indeed, they are accurate, I am afraid they portray UCLA's administration in a damn poor light. Arbitrariness, secretiveness, powermongering and really outstanding stupidity seem to characterize the administration's motives and actions, while Mr. Helfman appears to have conducted himself with both taste and restraint. I am a university person myself and I must say I had rather hoped the kind of bullshit I had to deal with in my own student days had been improved on in the intervening decades. How unfortunate that UCLA has learned nothing. You ought to restore a network connection to Mr. Helfman immediately and tender him a public apology now. If my information is wrong or some reasonable solution has developed, no-one would be happier than I. Dave Stevens _________________________________________________________________ Date: Wed, 04 Nov 1998 13:28:59 +0100 From: Francois Heizmann, francois_heizmann@hp.com Subject: Comments for improvements? In the main page you're requesting "great" ideas for improvements... Well ! I'm sad to say you did a perfect job... :-) Please keep on going that way. Cheers, Francois Heizmann _________________________________________________________________ Date: Sat, 21 Nov 1998 22:51:52 -0700 From: Evelyn Mitchell, efm@tummy.com Subject: Linux Demonstration at Park Meadows CompUSA This afternoon, Kevin Cullis, Business Account Manager at the Denver Park Meadows CompUSA, graciously invited several Northern Colorado Linux advocates and consultants to help him set up a demonstration Linux system. Attending were Lynn Danielson of CLUE, George Sowards, Brent Beerman, Fran Schneider, Alan Robertson of the High Availability Linux Project, and Sean Reifchneider and I of tummy.com, and Pete who has been advocating Linux to Kevin for several years. Kevin started out describing some of the opportunities he sees for Linux in small and home offices, and was quite enthusiastic about using Linux as a tool to leverage information in Intranets, Internets, and Extranets (VPNs). We discussed the strengths and weaknesses of Linux as a desktop machine, particularly the different style of administration required between Windows or Macintoshes and Linux, and the ways in which the Linux community, particularly Wine, is moving closer to achieving binary compatibility with Wintel applications. We also discussed how reliability is the biggest selling factor for those power users who are sick of the Blue Screen of Death. We installed Red Hat 5.2 using server mode as a fresh install first, and Kevin was absolutely delighted with how simple it was. Three questions and 20 minutes. While the applications were loading for Red Hat, Sean hooked up the machine we brought loaded with Red Hat 5.2, KDE, Enlightenment and Applix. Kevin was very impressed with KDE, I suspect because he was expecting a much different interface. He could see selling a KDE system to someone who had only used Windows or Macintoshes without any problem. We then installed Caldera 1.3 on the first machine, as a dual boot. The installation was only slightly more complicated than the Red Hat server mode. This is only the beginning of the journey, though. Lynn Danielson will be guiding Kevin through the basics of administering and demonstrating these systems. On December 10th many of the participants today will be meeting again at the Boulder Linux Users Group Mini-Expo to get a look a much broader range of Linux applications. As Sean said, a good Saturday of advocacy. Evelyn Mitchell _________________________________________________________________ Date: Wed, 18 Nov 1998 11:06:59 +0000 From: Harry Drummond, in4831@wlv.ac.uk Subject: re: Linux easy/not easy/not ready/ready YIKES I have a lot of sympathy with Tim Gray's remarks on the intelligence of the user, but (inevitably) I also have reservations. I'm not a computer professional of any kind, but I bought a BBC computer way back in 1983 and taught myself to program. I then learned two other flavors of Basic, then QuickBasic, and currently Delphi for a hobby application I've been selling since 1989. I also taught myself HTML (and taught others afterwards). And while I haven't yet got to grips with Linux because the latest version of my application is due out again, I have the two versions of Linux recently distributed on UK magazines and I'm at least 90% confident of installing it. The other 10% will be the challenge. But in common with many users, I apply the maxim "when all else fails read the manual" (ironic when I write a manual for my own application). As a result, I have spent months programming things that I then learned could have been done much more simply *if I'd only known the command.* Well, at the time I didn't! And the very wealth of material can be a hindrance if you cannot yet slot all the bits into the right place in your mind. It's also enormously frustrating to work with manuals, etc. (when you *do* read them!), that gloss over the particular point that causes trouble. In some cases, the problem is more imaginary than real - but it's real enough to the beginner until he/she cracks it. I work in a University Library where we do our best to get students using computers. Some need only a hint, some will never understand more than a tiny fragment. But we've produced the briefest handouts we can (1 sheet of paper) and still had the student begging for help when the answer was plainly written in the handout clutched in their fingers. People commonly want people for help, not documents. Finally, some people don't want education, they want to cut straight to the answers. If we're honest, we all do it at different times. I've got stacks of software that came on magazine discs. Unless they really fascinate me, the only ones likely to survive a five-minute exploration are those that convince me I can make them work with minimum effort. With me, as with many users, it isn't intelligence that's in question, it's commitment to the task in hand. And that determines whether the user is into exploration and education, or just picking up a work-ready tool for an hour. I'll see you with my newbie questions shortly! -- Harry Drummond. _________________________________________________________________ Date: Wed, 18 Nov 1998 10:07:36 +0000 From: Harry Drummond, in4831@wlv.ac.uk Subject: Not Linux I read your remarks on Jonathan Creek with interest, but appreciate them while you can. They only make about 6 episodes at a time, with (I think) two series in all so far. I suspect the concept was a one-off series to test the water and was successful enough to do more. My wife and I (as ordinary viewers) are confidently looking forward to a third series in due course, but we've seen some very promising ideas survive only one series. Britain also has a large percentage of viewers who would quickly switch to soaps, game shows, or - if they stretched themselves - Dallas et al. That does tend to kill shows that have promise but need to build. Things like Jonathan Creek, Morse and so forth are probably no more common on our screens than they are on yours. But you *are* right about beautiful people. Using 'ordinary' people has the downside of making the programmes look more ordinary to us, but more closely linked to reality as well. For viewers abroad, of course, there is always an exotic flavour as well - something the native (in any culture) usually misses. Happy viewing! Harry Drummond _________________________________________________________________ Date: Fri, 13 Nov 1998 00:41:51 +0000 From: "I.P. Robson", dragonfish@messages.to Subject: Link : Cheers.. I just want to say that's a really sexy link at the top of the index page... and even I can't miss it now... Hopefully I'll never forget to download an issue now.. And even though you already know I think you guys are the best, I have to tell you again.... Thanks :) Pete Robson _________________________________________________________________ Date: Mon, 30 Nov 1998 12:54:46 -0800 From: Geoffrey Dann, gdann@nfesc.navy.mil Subject: Telnet vs Rlogin In issue 34, article "Securing Your Linux Box", the author mentions TELNET using the .rhosts file. In the few systems I've used (BSD4, SunOs, Solaris, Linux), "rlogin" uses the .rhosts file, but "telnet" does not. Other than that, great article! thanks.. -- Geoff _________________________________________________________________ Published in Linux Gazette Issue 35, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Next This page is maintained by the Editor of Linux Gazette, gazette@ssc.com Copyright © 1998 Specialized Systems Consultants, Inc. "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ More 2¢ Tips! Send Linux Tips and Tricks to gazette@ssc.com _________________________________________________________________ Contents: * NumLock - On at Startup * Environment configuration using zsh * XWindow servers for MS PCs * Simultaneous color depths for X * Netscape * Hard Disk Duplication - Update * Back Ups * ANSWER: Re: suggestion for Linux security feature * ANSWER: Re: How to add disk space to Red Hat 5.1? * ANSWER: Re: Win95 peer-to-peer vs. Linux server running Samba * ANSWER: Re: Single IP Address & Many Servers. Possible? * ANSWER: Re: Help Modem+HP * ANSWER: Re: Suggestion for Linux security features _________________________________________________________________ NumLock - On at Startup Date: Mon, 02 Nov 1998 09:37:58 -0500 From: Brian Trapp, bmtrapp@acsu.buffalo.edu Here's a 2 cent tip for others trying to turn NumLock on at startup (I'm using Red Hat 5.1, Linux 2.0.34) Dennis van Dok wrote in to let us know there's a program called "setleds" that will handle this kind of activity. The "Linux FAQ" http://theory.uwinnipeg.ca/faqs/section7.html#q_7_10 has this to say about how to set this up automatically. Question 7.10. How do I get NUM LOCK to default to on ? Use the setleds program, for example (in /etc/rc.local or one of the /etc/rc.d/* files): for t in 1 2 3 4 5 6 7 8 do setleds +num < /dev/tty$t > /dev/null done setleds is part of the KDB package (see Q7.9 `How do I remap my keyboard to UK, French, etc. ?'). Alternatively, patch your kernel. You need to arrange for KBD_DEFLEDS to be defined to (1 << VC_NUMLOCK) when compiling drivers/char/keyboard.c. Steve Head also wrote in saying he thought there was a setting in the X11 configuration file to change this, but I haven't had a chance to try that yet. Again -- the Linux community comes through. Thanks to all who helped. Brian Trapp _________________________________________________________________ Environment configuration using zsh Date: Wed, 04 Nov 1998 02:27:39 +0100 From: Gerard Milmeister, gemi@bluewin.ch It may happen that I want to use a software package which includes lots of binaries, sometimes even hundreds of them as is the case with BRLCAD. These packages live in their own directories, for example /usr/local/brlcad/bin, /usr/local/brlcad/lib etc. I don't want to cp, mv or ln the binaries in a common place like /usr/local/bin as they would clutter up these directories and, more important, name clashes can arise. Furthermore these packages require environment variables to be set, and it would be cumbersome to configure these in a personal .zshrc file. The following method using zsh may help to quickly set up an environment appropriate for the specific package. The idea is, that calling a script, e.g. brlcad_setup, living in a common place, will make a new instance of shell properly set up. Using zsh it is possible to modularize the configuration, such that it is possible build up a general configuration tool. Example: In the directory /usr/local/brlcad I put the following shell script, linked into /usr/local/bin: brlcad_setup: #!/bin/sh export BRLCADHOME=3D/usr/local/brlcad # (*) export PATH=3D$BRLCADHOME/bin:$PATH # (*) export MANPATH=3D$BRLCADHOME/man # (*) export ZDOTDIR=3D/usr/local/lib/zsh # (**) export PSNAME=3Dbrlcad # (**) exec zsh # (1) (**) In /usr/local/lib/zsh there is a replacement .zshenv file: . ~HOME/.zshrc export PSLOCAL=3D$PSNAME:$PSLOCAL PS1="[$PSLOCAL%n]:%~:$" This is called at (1) in place of the user's .zshenv and will set up the prompt, so that the user is able to see in what environment he works. The lines (*) are the customization for the particular package. The lines (**) can be used as a template for other configuration scripts, with PSNAME set to the name of the package. I have created scripts for gpm (Modula-2 compiler, name clash with the console mouse driver), brlcad and bmrt. Example session: [gemi]:~:$brlcad_setup = [brlcad:gemi]:~:$bmrt_setup = [bmrt:brlcad:gemi]:~:$gpm_setup = [gpm:bmrt:brlcad:gemi]:~:$exit [bmrt:brlcad:gemi]:~:$exit [brlcad:gemi]:~:$exit [gemi]:~:$ At each level, the PATH configuration and other environment variables are available for the packages displayed in the prompt, and will disappear as soon as a shell is exited. -- Gerard _________________________________________________________________ XWindow servers for MS PCs Date: Fri, 6 Nov 1998 17:09:58 +1300 From: Mark Inder, mark@tts.co.nz A while ago I inquired about X Windows servers for PC's so that I could run my Linux GUI on my PC for administration etc.. I got about 32 replies. Great support! I have summarized the replies here in case anybody else is interested. I tried the MI/X and VNC. I found MI/X tricky and not very solid, and VNC to be amazingly flexible. Try viewing your own desktop from another PC while viewing that PC's desktop. Replies: * XAppeal from ftp://ftp.xtreme.it/pub/xappeal * There's a freeware X server at http://www.microimages.com/ * $99 XwinPro, http://www.labf.com/ * StarNet Communications Corporation, http://www.starnet.com/ * Yahoo has a Page that has links to various X servers (Mix and Starnet ones are listed here also): http://www.yahoo.com/Computers_and_Internet/Software/Platforms/X_W indow_System/ * try the list at http://www.rahul.net/kenton/xsites.html#XMicrosoft * There are all kinds of shareware X servers for win32, take a look at http://www.winfiles.com for a listing. The best server you'll probably find is Hummingbird Software's eXceed. * Try looking for a product called XWIN32, it's not shareware but it is quite cheap ( compared to exceed and the like ). * Try getting the demo X-Win32 from http://www.starnet.com/ * Here you will find a lot of info about X: http://www.rahul.net/kenton/xsites.framed.html * Check http://www.starnet.com/ and poke "Product Demos" -- Mark Inder _________________________________________________________________ Simultaneous color depths for X Date: Tue, 10 Nov 1998 16:47:34 -0500 From: Adam Williams, awillia1@chuma.cas.usf.edu With this technique you can run several X servers simultaneously with different color depths. This comes in handy for interoperating programs that only support a few color depths or previewing images in different color depths, all without quitting the current session or so much as opening a Control Panel. Create a startx file for every bit depth called startx8, startx16, or startx24. Give yourself execute permission on those. In each startx file put the following, which is a slightly modified version of the default startx: #!/bin/sh bindir=/usr/X11R6/bin userclientrc=$HOME/.xinitrc userserverrc=$HOME/.xserverrc sysclientrc=/usr/X11R6/lib/X11/xinit/xinitrc sysserverrc=/usr/X11R6/lib/X11/xinit/xserverrc clientargs="" serverargs="" display=:0 depth=8 if [ -f $userclientrc ]; then clientargs=$userclientrc else if [ -f $sysclientrc ]; then clientargs=$sysclientrc fi fi if [ -f $userserverrc ]; then serverargs=$userserverrc else if [ -f $sysserverrc ]; then serverargs=$sysserverrc fi fi whoseargs="client" while [ "x$1" != "x" ]; do case "$1" in /''*|\.*) if [ "$whoseargs" = "client" ]; then clientargs="$1" else serverargs="$1" fi ;; --) whoseargs="server" ;; *) if [ "$whoseargs" = "client" ]; then clientargs="$clientargs $1" else serverargs="$serverargs $1" case "$1" in :[0-9]) display="$1" ;; esac fi ;; esac shift done serverargs="$serverargs $display -auth $HOME/.Xauthority -bpp $depth" mcookie=`mcookie` xauth add $display . $mcookie xauth add `hostname -f`$display . $mcookie echo "xinit $clientargs -- $serverargs" exec xinit $clientargs -- $serverargs Change the display and depth variables to different numbers for every startx file. For example:b4 For an 8 bit server set depth=8 and display=:0 For a 16 bit server set depth=16 and display=:1 For a 24 bit server set depth=24 and display=:2 You can even have several startx files for the same bit depth as long as the display variables are different. Now you can start up an 8 bit server with startx8. Open an xterm and type startx16 to get a 16 bit server without quitting the 8 bit server. You can switch between servers using the Ctrl-Alt-F keys. _________________________________________________________________ Netscape Date: Tue, 10 Nov 1998 08:25:13 -0600 From: Jim Kaufman, hsijmk@harmonic.com You recently published the following tip: Nevertheless, Netscape seems to create a directory nsmail in the user's home directory every time it starts and doesn't find it, even if mail is not used. This is annoying. Here's a trick which doesn't make this directory go away, but at least makes it invisible. I didn't find a GUI equivalent to change this setting so you have to do the following: Edit the file ~/.netscape/preferences.js and change all occurrences of 'nsmail' to '.netscape'. The important thing here is, of course, the leading dot before 'netscape'. My recommendation is to edit ~/.netscape/preferences.js and change the occurrences of 'nsmail' to '~/Mail' That way, netscape can display mail if I choose, or I can use another mail reader (elm, mutt, pine, etc.) configured to use the same directory. -- James M. Kaufman _________________________________________________________________ Hard Disk Duplication - Update Date: Mon, 9 Nov 1998 23:41:06 -0800 From: Michael Jablecki, mcjablec@ucsd.edu The Ingot program did not work well for me. Power Quest has, IMHO, a superior product for less money -- drive image. Good stuff! http://www.powerquest.com -- Michael _________________________________________________________________ Back Ups Date: Sun, 25 Oct 1998 03:46:10 +0000 From: Anthony Baldwin, ab@spkypc.demon.co.uk Here's my two cent tip: Disk space is relatively cheap, so why not buy a small drive say 500Meg which is used for holding just the root /lib /bin /sbin directories. Then setup a job to automatically back this up to another drive using "cp -ax" (and possibly pipe it through gzip and tar). This way when the unthinkable happens and you loose something vital, all you have to do is boot from floppy mount the 2 drives and do a copy. This has just saved my bacon while installing gnu-libc2 -- Anthony Baldwin _________________________________________________________________ Tips in the following section are answers to questions printed in the Mail Bag column of previous issues. _________________________________________________________________ ANSWER: Re: suggestion for Linux security feature Date: Sun, 01 Nov 1998 01:10:10 -0700 From: Warren Young, tangent@cyberport.com In regards to a letter you wrote to the Linux Gazette: A. only that user could access their own cache, cookies, pointer files, etc. I will first assume that you already have the computer basically secured: you are not logging in as "root" except to maintain the system, and the "regular user" account you are using does not have permission to write files to any other area of the hard disc than your own home directory. (I will ignore the "temporary" and other "public" directories.) The first step is to set the security permissions on your home directory and its subdirectories. I won't go into the details here (that's best left to a good introductory Linux text), but you can have the system disallow other users from reading and/or listing the contents of your directories, as well as disallowing write access. (Under Red Hat Linux 5.0, the default is to disallow others _all_ access to your home directory, but subdirectories you later create aren't protected in this way.) Do the same for your existing files. Next, learn to use the "umask" command. (This command is part of your shell -- find out what your "login shell" is, and then read its manual to find info about this command.) The umask command sets the "default file permissions" for new files. For example, you can make the system create new files and directories such that only you can read them or write to them. One other thing you should look into is an encrypting file system driver. I seem to recall hearing of such a thing for Linux, but I can't recall any details. I do not know how deleted files could be safeguarded in this way It's possible to patch the OS so that the "unlink()" system call always overwrites the file with zeros or something before it removes the file from the file system. That would make the system run slower at times, but that might be a worthwhile tradeoff for you. That should be a fairly easy change to make to the kernel, given that the source code is available. If you don't know how to do this and are unwilling to learn, try asking on the Net for someone to do this for you. You can probably find someone who's willing just because it's an interesting thing to do. B. these files - the whole lot of them - could be scrubbed, wiped, obliterated (that's why it's important for them to be in a known and findable place) by their owner, without impairing the function of the applications or the system, and without disturbing similar such files for other users. You list as criteria (to paraphrase) "without disturbing the system for others", so the kernel idea above wouldn't work. Instead, you would probably want a utility to do the same thing as the kernel idea: overwrite the file (perhaps multiple times) with junk, and then remove it. This, again, shouldn't be too hard to write, and I wouldn't be surprised if it doesn't already exist. Such things already exist for most other operating systems.... You could even make it a fancy drag-and-drop X Windows application so you just drag files to it like a Mac/Win95 "trash can" and it securely deletes the file. C. it would be nice too if there were a way to prevent the copying of certain files, and that would include copying by backup programs (for example, I'm a Mac user and we use Retrospect to back up some of our Macintoshes; there's a feature to suppress the backing up of a particular directory by having a special character (a "bullet", or optn-8) at the beginning or end of the directory name.) But if this could be an OS-level feature, it would be stronger. This sort of feature does not belong in the operating system because "backup" is not part of the operating system, it's an add-on. The reason that it's an add-on is because you want to allow each individual to choose their own backup solution based on their own needs, desires and preferences. I may want to use the BRU backup program, while another might prefer "afio", and a third person may be a raving "tar" fan. The point is, it's not part of the OS, so several different backup programs have emerged, each with a different style and feature list. The price of this freedom and flexibility is that a feature like "don't back this file up" is something that each program will implement differently. It can't be part of the OS under this model, and I don't think we want to change this. If I'm user X, and I want to get rid of my computer, or get rid of everything that's mine on the computer, I should just be able to delete all of my data files (and burn them or wipe them or otherwise overwrite that area of the disk), which I can surely do today. But in addition, I should know where to go to do the same thing with whatever system level files might be out there, currently unbeknownst to me, and be able to expunge them also, without affecting anything for anyone else. The safest method is to erase the hard disk with a "government level wipe" program. Many of these exist for DOS -- you can create a DOS disk for the sole purpose of booting up and wiping your system. Then, install a fresh copy of the OS. This is the only way you can be sure that everything sensitive is off of the machine. The only other option is for you to learn where all of the "individual configuration" files are kept -- that is, those files that make your setup unique. Following the security suggestions above can help, because then applications can't store something where you can't find it -- the OS won't let it, and thus everything is either under your home directory, or somewhere you put it as "root". But, you may miss a file, so the "wipe the HD" is the only foolproof method. Good luck, Warren -- http://www.cyberport.com/~tangent/ _________________________________________________________________ ANSWER: Re: How to add disk space to Red Hat 5.1? Date: Wed, 4 Nov 1998 20:43:35 -0800 (PST) From: R Garth Wood, rgwood@peace.netnation.com 0 init 1 1 mount your drive on /mnt **(see below) 2 cp -dpR /usr /mnt 3 umount /mnt 4 mount your drive on /usr 5 init 2 6 rejoice ** recompile your kernel. make sure you have the options needed in the HOWTO: http://sunsite.unc.edu/pub/Linux/docs/HOWTO/mini/ZIP-Drive -- R Garth Wood _________________________________________________________________ ANSWER: Re: Win95 peer-to-peer vs. Linux server running Samba Date: Wed, 4 Nov 1998 20:36:15 -0800 (PST) From: R Garth Wood, rgwood@peace.netnation.com The advantages are: * It won't go down * You don't have to use a good machine * you can print from UNIX as well * you can do other things on it as well -- R Garth Wood _________________________________________________________________ ANSWER: Re: Single IP Address & Many Servers. Possible? Date: Wed, 4 Nov 1998 20:27:50 -0800 (PST) From: R Garth Wood, rgwood@peace.netnation.com Look into the programs "redir" and "rinetd". -- R Garth Wood _________________________________________________________________ ANSWER: Re: Help Modem+HP Date: Fri, 20 Nov 1998 03:24:36 -0800 From: "David P. Pritzkau", pritzkau@leland.Stanford.EDU In issue 33 of the Linux Gazette you wrote: I have already spent hours trying to fix my Supra336 PnP internal modem and my HP DeskJet 720C under Linux! The result is always the same, no communication with the modem and no page printed on the HP printer! Could someone help me, I am close to abandon! I've had the same problem with the HP820 printer. It turns out that the '20 series printers use a protocol called PPA unlike the PCL protocols that HP uses for its other printers. Basically Windows uses software to print to these printers. Fortunately there's somebody out there who was able to figure out some of that protocol (since HP isn't releasing any info). This person created a PPA to PBM converter to allow printing under Linux. Right now you can only print in black and white, but that's better than nothing. If you are shopping for a printer and plan to use Linux, you should avoid the '20 series HP printers like the plague. Here's the URL where you can find more info about the converter and download it. It comes with sample scripts to setup the printing. Keep in mind that you must change the 'enscript' command in the scripts to 'nenscript' because enscript is a commercial program. Also take out the '-r' switch since 'nenscript' doesn't support it. Hope this helps. http://www.rpi.edu/~normat/technical/ppa/index.html -- David P. Pritzkau _________________________________________________________________ ANSWER: Re: Suggestion for Linux security features Date: Fri, 13 Nov 1998 11:17:18 +0100 From: Roger Irwin, irwin@mail.com Linux already does most of what you said (example, netscape cache cookie files are kept in a .netscape file in your home that cannot be accessed by other users). As for delete, this can easily be done by a user file that opens the file for random access and writes x's everywhere before deleting. Have seen such utilities around for virtually all platforms (as it only requires ANSI C calls, you could easily write a command that compiles onto any platform. It is slow, and could be slightly improved by being done in kernel space. If you want to try, I suggest that you start by reading Alessandro Rubini's book "Writing Linux Kernel Device Drivers". This will give you an easy and gentle introduction to programming in Kernel space. Once you have got the hang of that, you should read through the documentation for the e2fs. Then implement a simple draft version. Once you have it working, post it to the Linux Kernel development mailing list, and the kernel hackers will guide you from there. DO NOT approach the kernel list with ideas you are thinking about doing. It is not that they are unresponsive, but there are a lot of Linux users and with a lot of ideas, they could easily be submerged. In order to avoid time wasters, they are forced to adopt a 'first show me the code' attitude. This is not a bad thing as when one starts to actually implement something (rather than dream about it) you begin to realize WHY it has not yet been done. Once you actually have something, even a first draft that only vaguely works, you will find kernel developers very responsive and helpful. -- Roger _________________________________________________________________ Published in Linux Gazette Issue 35, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ This page maintained by the Editor of Linux Gazette, gazette@ssc.com Copyright © 1998 Specialized Systems Consultants, Inc. News Bytes Contents: * News in General * Software Announcements _________________________________________________________________ News in General _________________________________________________________________ January 1999 Linux Journal The January issue of Linux Journal will be hitting the newsstands December 10. This issue focuses on our Reader's and Editor's Choice awards. Included with the magazine this month is a 24-page supplement on Enterprise Solutions in which we interview Netscape's Jim Barksdale, Corel's Michael Cowpland and IBM's Paraic Sweeney. Check out the Table of Contents at http://www.linuxjournal.com/issue57/index.html. To subscribe to Linux Journal, go to http://www.linuxjournal.com/ljsubsorder.html. _________________________________________________________________ LinuxWorld Conference & Expo Boston, MA (September 30, 1998) -- International Data Group (IDG), the IT media and information company, today unveiled plans to launch a global product line of events and publications to address the needs of the rapidly growing Linux market. IDG World Expo, the world's leading producer of IT-focused conferences and expositions, will produce LinuxWorld Conference & Expo, the first international exposition addressing the business and technology issues of the Linux operating environment. IDG's Web Publishing unit, one of the first online-only IT publishers, will launch LinuxWorld, an online-only magazine for the more than seven million technologists requiring in-depth information on implementing Linux and related technologies in diverse environments. The first LinuxWorld Conference and Expo will be held March 1-4, 1999 at the San Jose Convention Center. For more information: http://www.idg.com/ _________________________________________________________________ Sun loans Ultra30 Systems to Debian Date: Fri, 06 Nov 1998 14:29:56 -0500 Sun Microsystems (http://sun.com/) has loaned three UltraSPARC systems to Debian project. They are 64-bit Ultra30 workstations, each with with an UltraSPARC-II/250MHz CPU (1M-ECache), 128MB RAM, 4.3GB Seagate SCSI drive and a Creator graphics card. One system is installed at Kachina Technologies, Inc. and will be publicly available to Debian developers. The other two systems are used by developers to develop boot related packages and other low level tools. There is a port specific web page that contains information on the work in progress at http://www.debian.org/ports/sparc64/. People interested in helping with the Debian UltraLinux effort should check there for the current port status. For more information: Debian GNU/Linux, http://www.debian.org/, press@debian.org _________________________________________________________________ Dallas/Ft. Worth area Linux show Date: Wed, 11 Nov 1998 05:16:53 -0600 There is an online survey at http://linux.uhw.com/ to get the needs and wants of a DFW area Linux show. We want to find out what people who want to attend want in the show before we do the hardcore planning. Pass the word please to those who may want to go. For more information: Dave Stokes, david@uhw.com _________________________________________________________________ O'Reilly Announces Open Source Conferences SEBASTOPOL, CA--O'Reilly & Associates announced today that it is expanding its support of Open Source software by presenting the O'Reilly Open Source Conferences--Perl Conference 3.0 plus several new technical Conferences on mission-critical Open Source software--on August 21-24, 1999 at the Monterey Convention Center in Monterey, CA. For the first time, programmers, webmasters, and system administrators can find--under one roof--a spectrum of high-end technical sessions, presented by the key developers in each technology. In real-world applications, users draw on several Open Source technologies to get the job done. At the O'Reilly Conferences on Perl, Linux, FreeBSD, Apache, Sendmail and other Open Source technologies, attendees can move freely between Conferences, choosing from a rich panoply of sessions on these interrelated technologies. In addition, each Conference is preceded by in-depth tutorials. Linux Journal is a major sponsor of O'Reilly's Linux Conference. Publisher Phil Hughes said, "Since the early days, O'Reilly has been documenting Linux and the Open Source utilities that Linux users depend on. They're very close to the technical community, and they'll bring that inside perspective to their Linux Conference. We're looking forward to working with them." For more information: http://conferences.oreilly.com _________________________________________________________________ New Mailing List for Linux in Education Date: Fri, 13 Nov 1998 10:17:01 -0500 The SEUL Project (http://www.seul.org/) has started a mailing list, seul-edu, to cover all aspects of educational uses of Linux. In addition to the discussion, resources are available that should enable the development (with the help of interested volunteers) of various open source software that can make Linux more desirable to educators and parents interested in using Linux for their children's education. Currently the list is made up of educators, writers, and some developers. You can see the archives of the mailing list, as well as current plans and contacts for the project, at http://www.seul.org/archives/seul/edu/. Before the creation of seul-edu, the discussion took place on the seul-pub mailing list; you can see those discussions in the October and November archives of that list at http://www.seul.org/archives/seul/pub/. To subscribe to seul-edu, just send a message to majordomo@seul.org with no subject and with "subscribe seul-edu" in the message body. _________________________________________________________________ Linux Boot Camp Announcement Date: Sat, 7 Nov 1998 10:08:19 -0800 Four days of intensive hands-on technical training. Certification is provided for the full boot camp. Schedule: *Understanding & Administering Linux* January 12-13, 1999 San Jose, CA January 26-27, 1999 Carlsbad, CA February 1-2, 1999 Raleigh, NC February 22-23, 1999 Chicago, IL March 29-30, 1999 Dallas, TX April 20-21, 1999 Phoenix, AZ May 18-19, 1999 Atlanta, GA June 15-16, 1999 Washington, DC June 22-23, 1999 Carlsbad, CA *Integrating Linux with Windows 95/98/NT* January 14, 1999 San Jose, CA January 28, 1999 Carlsbad, CA February 3, 1999 Raleigh, NC February 24, 1999 Chicago, IL March 31, 1999 Dallas, TX April 22, 1999 Phoenix, AZ May 20, 1999 Atlanta, GA June 17, 1999 Washington DC June 24, 1999 Carlsbad, CA *Securing your Box in One Day* January 15, 1999 San Jose, CA January 29, 1999 Carlsbad, CA February 4, 1999 Raleigh, NC February 25, 1999 Chicago, IL April 1, 1999 Dallas, TX April 23, 1999 Phoenix, AZ May 21, 1999 Atlanta, GA June 18, 1999 Washington DC June 25, 1999 Carlsbad, CA For more information: Deb Murray, dmurray@surfnetusa.com http://www.uniforum.org/web/education/bootcamp.html _________________________________________________________________ Linux wins PC World Denmark award for "Innovation of the Year - Software" Date: Mon, 16 Nov 1998 08:59:20 GMT Linux wins PC World Denmark award for "Innovation of the Year - Software" Copenhagen, 1998-11-12 On behalf of the entire Linux community, the Skåne Sjælland Linux User Group (SSLUG) today received the PC World Denmark 'Product of the Year' award in the category "Innovation of the Year - Software". The award was accepted by Peter Toft and Henrik Størner from SSLUG. The "Innovation of the Year" award is given to products or technologies which have shown significant innovativeness and impact through out the year. PC World editors motivated their choice thus: "Linux. The 'Ugly Duckling' that turned into a beautiful swan and became - to put it briefly - the most widely used operating system for Internet servers world wide, despite the marketing muscle of the larger companies. NT has a tremendous hold on the market, but Linux is gaining new followers every day, and continues to find new uses wherever a stable, economical and versatile operating system is needed." The other two nominees in the "Innovation of the Year - Software" category were * Microsoft Windows 98 * Mirabilis ICQ For more information: Peter Toft, ptoft@sslug.dk Henrik Størner, storner@sslug.dk _________________________________________________________________ ISVs -- please join the LSB effort With the Linux standardization well on its way with the Linux Standard Base (LSB) effort headed by Daniel Quinlan, various vendors brought up the issue that there needed to be a way for independent software vendors to get their input into the standards effort. After some discussion, it was decided to add a mailing list to the LSB effort that was specifically for ISVs. This list will make it possible for ISVs to hash out what they see needed in the Linux standard and then present their joint effort to the LSB group for consideration. This approach will make it easier for LSB to meet the needs of all the vendors. If you are an ISV and want to join the list, send your e-mail address to Clarica Grove (clarica@ssc.com) with ISV in the subject line of your message. She will add you to the list and we can get our part of the effort underway. If it is unlikely we are familiar with the product you have developed, please include a brief description. For more information: Phil Hughes, phil@ssc.com _________________________________________________________________ Linux Game Development Center Date: Mon, 16 Nov 1998 09:39:14 GMT Linux has games. Linux has good games. But that other operating system has several orders of magnitude more good games than Linux. That's bad. And difficult to overcome, as it's not only because of technical reasons. But we, the free software community, have have a long history of solving problems and shipping around obstacles. There is no reason why we should not be able to solve this issue, too. In essence we are suggesting that this new Linux Game Development Center be a kind of meta-project. It would be dedicated to advocating Linux as gaming platform, collecting knowledge about Linux game development and using it to help all interested people, providing facilities for discussion to Linux game developers and, last but not least, encouraging and helping existing free (Open Source) game SDK projects coordinate with one another. This is also a call for developers, users and game SDK projects to join our efforts. While game development for Linux would be an important goal of the web site, the most important goal would be the development of quality cross-platform game libraries. For that reason, developers of games and game SDKs for platforms other than Linux would be more than welcome to join us. Especially if they are interested in porting software to or from Linux. The biggest problem with having multiple, competing projects is the resultant (developer and user) confusion. What we are proposing is a Linux Game Development Center that is aimed simply at reducing that confusion by helping people to find, evaluate, combine and use the available tools, or to develop new, missing ones. http://www.linuxgames.org For more information: Christian Reiniger, warewolf@mayn.de PenguinPlay, http://sunsite.auc.dk/penguinplay/ _________________________________________________________________ New benefit for LJ's GLUE LUGs--Tcl Blast! Date: Mon, 23 Nov 1998 21:32:13 GMT GLUE---Groups of Linux Users Everywhere announces the newest benefit for groups who join. By popular demand and in conjunction with the Tcl/Tk Consortium, SSC and Linux Journal's GLUE program is making available the TCL Blast! CD-ROM. This is the latest addition to the membership package GLUE sends out to our new LUGs members. Some of the other benefits include: the BRU 2000 backup and restore utility, and Caldera OpenLinux Lite! We provide free listings for all LUGs at our web site, where you can also: see the complete list of the GLUE benefits; find information and resources for Linux User Groups; check to see if there is a LUG in your area; post to the Users Seeking Groups part of the listings pages; or check to see that there is an accurate listing for your LUG. Please contact me if you have any questions. For more information: Clarica Grove, Groups of Linux Users Everywhere, glue@ssc.com, http://www.ssc.com/glue/ _________________________________________________________________ Linux Promoted in Albanian Fair Date: Sat, 28 Nov 1998 14:13:20 GMT Yesterday the KlikExpo international fair was opened in Tirana Albania. With the help of Fastech Ltd, Linux.org Albania could promote Linux for the first time in Albania. Our section was also visited by the Albanian Prime Minister. I had a brief chat with him, and described shortly the power and efficiency of Linux. Our section will be open for the next 4 days at the Tirana international fair center. Special thanks to Fastech Ltd. who made available for us an ACER PII 300MHz machine and hosted us in their section. To read more and see the pictures, please check: http://lowrent.org/lnxorgal/klikexpo98 For more information: Kledi Andoni, kledi@linux.org.al _________________________________________________________________ Open Source Trademark? I, for one, am confused. See if you can figure what's going on with these two announcements: Future of the Open Source Trademark Launch Announcement of the Open Source Initiative _________________________________________________________________ Linux Links StarOffice 5.0 Personal Edition Free: http://www.stardivision.com "An Open Letter to AOL" from Eric Raymond: http://www.opensource.org/aol-letter.html UNIX help: http://www.allexperts.com/software/unix.shtml Linux Ace: http://tarp.linuxos.org/linux/ Informix+Linux article: http://news.freshmeat.net/readmore?f=informix-jj "Liberty and Linux for All": http://www.theatlantic.com/unbound/citation/wc981021.htm Tim O'Reilly, "Open Letter to Microsoft": http://oreilly.com/oreilly/press/tim_msletter.html Eiffel Liberty: http://www.elj.com/ Linux Tips & Tricks: http://www.patoche.org/LTT/ Gary's Place Linux Guide: http://gary.singleton.net/ Official GNUstep Web Site: http://home.sprintmail.com/~mhanni/gnustep/ Blender Site: http://www.BeLUG.org/user/cw/blender_e.html Eric Kahler's FVWM Web Page: http://mars.superlink.net/eric/fvwm.html The Linux Game Tome: http://gametome.linuxquake.com/ OBSIDIAN, an open source 3D virtual world for Linux and OpenGL: http://www.zog.net.au/computers/obsidian/ inux Today: http://www.linuxtoday.com/ NewsNow: http://www.newsnow.co.uk Linux Help Page: http://www.ont.com/users/d4588/ Linux Sound and MIDI Applications Page: http://sound.condorow.net/ http://sound.lovebead.com/ http://www.bright.net/~dlphilp/linux_soundapps.html MICO Home Page: http://www.mico.org/ Management Guide to Shifting Standards Tactics: http://www.geocities.com/SiliconValley/Hills/9267/sstactics.html Red Hat Press Release _________________________________________________________________ Software Announcements _________________________________________________________________ KDE on Corel's Netwinder Ottawa, Canada--November 25, 1998 Corel Computer and the KDE project today announced a technology relationship that will bring the K Desktop Environment (KDE), a sophisticated graphical user environment for Linux and UNIX, to future desktop versions of the NetWinder family of Linux-based thin-clients and thin-servers. A graphical user interface is a necessary element for Corel Computer to create a family of highly reliable, easy-to-use, easy-to-manage desktop computers. The alliance between Corel Computer and KDE, a non-commercial association of Open Source programmers, provides NetWinder users a sophisticated front-end to Linux, a stable and robust Unix-like operating system. Corel Computer has shipped a number of NetWinder DM, or development machines, to KDE developers who are helping to port the desktop environment. Corel Computer plans to announce the availability of desktop versions of the NetWinder running KDE beginning in early 1999. Early demonstrations of the port, such as the one shown at the Open Systems fair in Wiesbaden, Germany, in September, have been enthusiastically received by potential customers. As a developing partner, Corel Computer will release its work back to the KDE development community. For more information: http://www.kde.org/, press@kde.org http://www.corelcomputer.com/ _________________________________________________________________ KEYTEC Announces Expanded Magic Touch Screen Capabilities. Date: Tue, 24 Nov 1998 15:38:33 EST Dallas, TX -- KEYTEC announced today that the Magic Touch touch screen system will soon be LINUX compatible. Screen users will be able to operate the Magic Touch touch screen in hardware configurations utilizing the LINUX operating system to gain the advantages of smaller file size, less memory requirements and faster data access. For more information: news@magictouch.com, http://www.magictouch.com/ _________________________________________________________________ Red Hat Software releases Red Hat Linux 5.2 Research Triangle Park, NC -- November 2, 1998 -- Simplified installation, Native Software RAID support, Apache 1.3 , GIMP 1.0, and the Application CD are among the features that mark Red Hat Software's November 9 release of Red Hat Linux 5.2. A feature of Red Hat Linux 5.2's new and improved installation is the ability to automatically partition the hard drive by selecting either a workstation or server install. All of the power of the Red Hat Linux OS is still available via "custom" install. Back buttons DHCP, boot floppy creation, enhanced rescue mode and countless other tools that made 5.1 a success are all still there. For more information: http://www.redhat.com/ CORBA on LINUX Gains Momentum Date: Tue, 03 Nov 1998 16:24:32 -0500 Framingham, MA - Programmers and end-users can now obtain implementations of the Object Management Group's (OMG's) Common Object Request Broker Architecture (CORBA) for Linux. As the momentum has grown behind the open source Linux operating system, more and more OMG members have requested this support. The emergence of CORBA-conformant ORBs for Linux is an indicator of the commercial confidence and industry support for both CORBA and Linux. At Washington University, the development of the TAO ORB is being sponsored by companies and organizations including Boeing, Lucent and Motorola which recognize the value of open source models and can recognize the future commercial value of such ORBs. For more information: info@omg.org, http://www.omg.org/ Debian GNU/Linux 2.1 'Slink' Frozen Date: Wed, 04 Nov 1998 14:56:52 -0500 Debian GNU/Linux 2.1 'Slink' is now in a frozen state. The delay was due to the need to stabilize some key packages in the distribution. The release of Slink is scheduled for December 1998. Debian GNU/Linux 2.2 'Potato' will be the next version of the Debian distribution. The name is taken from the character 'Mr. Potato Head' in the animated movie 'Toy Story.' For more information: press@debian.org, http://www.debian.org/ _________________________________________________________________ Servertec Announces New Release of iScript, a Platform Independent Scripting Language Written Entirely in Java Kearny, NJ. - November 5, 1998 - Servertec today announced the availability of a new release of iScript, a platform independent scripting language written entirely in JavaTM for creating scalable server side object oriented n-Tier enterprise solutions. The new release includes iScriptServlet, a Java Servlet, for directly accessing iScript from any web server supporting Java Servlets. The release also includes bug fixes and updated documentation. For more information: Manuel J. Goyenechea, goya@servertec.com, http://www.servertec.com/ _________________________________________________________________ QLM Reduces Product Development Time By 1/3 Newton, Mass., November 18, 1998 Kalman Saffran Associates, Inc. (KSA), a leading developer of state-of-the-art products for data communications, telecommunications and interactive/CATV industries, today announced the availability of their new QLM, an innovative process for companies looking to reduce product time-to-market in a highly competitive marketplace. Using QLM, KSA guarantees that companies will reduce their product development cycles by at least one-third. Based on a scientific methodology derived from practices implemented for such industry leading companies as Hewlett-Packard, Cisco Systems and Nortel, KSA's QLM combines a comprehensive set of processes, techniques, tools and templates together with a knowledge base to produce optimal results for companies in a broad set of industries. The QLM offering is available starting at $20,000. For more information: Joe Bisaccio, VP Marketing, Bisaccio@worldnet.att.net, http://www.ksa-mkt.com/ _________________________________________________________________ LINUX INCLUDED IN PLANETUPLINK EXPANSION 11/11/98 PRESS RELEASE: Planet Computer nationally unveiled their newest business solution, PlanetUplink on Oct. 30th. PlanetUplink IBN (Internet Based Network) allows businesses to gain access to and share virtually any application or database simultaneously (real time) on almost any computer from their remote and multiple offices, globally, via the Internet. This week, Planet Computer announced the expansion of PlanetUplink to support Linux (server and client), in addition to the currently supported Macintosh, OS/2, UNIX (Solaris/Sparc, Solaris/x86, SGI, IBM, SCO, HP/UX, DEC, SunOS), Windows (Win95, NT, Windows CE, Win3.x), DOS and Java. For more information: Mary A. Carson, Planet Computer, mary@planetuplink.com, http://www.Planet-computer.com/ _________________________________________________________________ mcl 0.42.05 - MUD Client for Linux Date: Mon, 16 Nov 1998 08:50:18 GMT mcl is a small MUD client running under a Virtual Console in Linux. It uses direct VC access via the /dev/vcsa devices, spending very little CPU time (compared to tintin). This, however, allows it only to be run under Linux and only under a virtual console. New in version 0.42.05 is a number of bug fixes (actions not saving, speedwalk acting incorrectly in some situation and more) as well as support for compression of the connection (using zlib). The latter is currently only supported by Abandoned Reality (abandoned.org 4444) but we hope to have the server-side code for any MERC-derived MUD available soon. Source: http://www.andreasen.org/mcl/mcl-0.42.05-src.tar.gz Binary (libc5): http://www.andreasen.org/mcl/mcl-0.42.05-bin.tar.gz Binary (glibc): http://www.andreasen.org/mcl/mcl-0.42.05-glibc-bin.tar.gz mcl is under GPL. For more information: Erwin Andreasen, erw@dde.dk _________________________________________________________________ New release of the ISA PnP utilities (isapnptools-1.17) Date: Mon, 16 Nov 1998 09:24:20 GMT I've now released version 1.17 of my Plug and Play ISA configuration tools. They cover isolation, dumping resource data, and configuring ISA PnP devices. The tools I wrote for this _will_ eventually be on ftp://ftp.demon.co.uk/pub/unix/linux/utils/isapnptools-1.17.tgz (81768 bytes), ftp://ftp.redhat.com/pub/pnp/utils/isapnptools-1.17.tgz and ftp://sunsite.unc.edu/pub/Linux/system/hardware/isapnptools-1.17.tgz ftp://tsx-11.mit.edu/pub/Linux/sources/sbin/isapnptools-1.17.src.tar.g z (And various mirror sites shortly afterwards). isapnptools-1.17.lsm in the same directory is simply the LSM entry for isapnptools. isapnptools-1.17.bin.tgz in the same directory also includes precompiled binaries. I've uploaded them, but they may take a day or two to reach their final home. The latest version is available now via the link on the isapnptools home page: http://www.roestock.demon.co.uk/isapnptools/ The isapnptools FAQ is available via the home page above. For more information: Peter Fox, isapnp@roestock.demon.co.uk _________________________________________________________________ FMan 0.2 release - an X11 man page browser Date: Mon, 16 Nov 1998 09:36:09 GMT FMan is an X Windows manual browser based on the FLTK libraries. Source and binaries are available. The program allows fast searching for man pages by keyword. Searching may include man page descriptions where available. Searching can be performed four different ways. History lists of recently viewed pages and program based configuration are included. Keyboard only usage is supported. Changes include removal of bash dependency, pre-scanning of man pages is now an option, uninstall option, italic or underlined text, more command line options, moved resource directory. http://fman.sacredsoulrecords.com/ For more information: Larry Charlton, lcharlto@mail.coin.missouri.edu _________________________________________________________________ jaZip 0.30: Tools for Iomega Zip and Jaz drives Date: Mon, 16 Nov 1998 09:44:41 GMT I would like to announce version 0.30 of jaZip for Linux, a program that combines: * Setting/unsetting the write protection flag on Iomega Zip/Jaz removable media * Securely and transparently mounting/unmounting disks without root privledges * Software eject feature * Reporting status of the disk in the drive * A very attractive, easy to use graphical interface based on XForms 0.88 Details and software are available at the jaZip web site: http://www.scripps.edu/~jsmith/jazip/ For more information: Jarrod Smith, jsmith@scripps.edu _________________________________________________________________ CMU SNMP for Linux v3.6 - SNMP agent and SNMP management tools Date: Wed, 18 Nov 1998 12:45:03 GMT This is the documentation for the tenth release of the CMU SNMP port to Linux. This port supports SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). It includes a bilingual SNMPv1/SNMPv2 agent and several simple command-line management tools. This release is based on the CMU SNMP release with USEC support. It does not implement the historic party based administrative model of SNMPv2 and has no additional support for SNMPv3. The source and binary distributions are named * cmu-snmp-linux-3.6-src.tar.gz * cmu-snmp-linux-3.6-bin.tar.gz and are available from ftp.ibr.cs.tu-bs.de (134.169.34.15) in /pub/local/linux-cmu-snmp. SNMP is the Simple Network Management Protocol of the Internet. The first version of this protocol (SNMPv1) is a full Internet standard and defined in RFC 1155 and RFC 1157. The second version of SNMP (SNMPv2) is defined in RFC 1901 - RFC 1908 and is currently a draft Internet standard. For more information: http://www.gaertner.de/snmp/, schoenfr@gaertner.de _________________________________________________________________ MaduraPage 1.0 for UNIX(Linux, Solaris) Beta version Date: Wed, 18 Nov 1998 13:03:27 GMT MaduraPage[TM] 1.0 is a WYSWYG web authoring tool for creating a homepage based on applet which performs HTML functions plus additional features such as moving objects (text, image, etc.) and object exact positioning. The page created by MaduraPage[TM] 1.0 can be viewed by JDK1.0 supporting browsers, such as Netscape Navigator 3.0 or above, Internet Explorer 3.0 or above. For more information on features, demo, or to download the package, visit the MaduraSoft web site at http://www.madurasoft.com/ The release version will be available within 1 month. Please send the bug report to bug@madurasoft.com For more information: Budhi Purwanto, budhi_purwanto@madurasoft.com _________________________________________________________________ Dlite v0.03 -- Debian Lite distributon Date: Wed, 18 Nov 1998 13:07:25 GMT Dlite v0.03 is small sub-set of the Debian GNU/Linux binary packages most suited to ISPs needing a small but powerful operating system. The distribution will always be less than 100 Mb so it's possible to maintain a mirror on every host ready for any situation, from emergency rebuild through to regular maintenance updates. A singular sub-set of packages cannot be all things to all people but by having one consistent base-line reference of the most commonly used packages readily available and widely used, therefore tested, it can assist smaller startup Linux based ISP tech people to get on with managing their clients rather than just the system. This is a fledgling project so any suggestion are most welcome. For more information: http://opensrc.org/dlite/, dlite@opensrc.org _________________________________________________________________ wxWindows/GTK C++ GUI library 1.96 Date: Wed, 18 Nov 1998 13:40:55 GMT a new version of the GTK port of the wxWindows cross-platform GUI library has been released. More information from homepage at http://wesley.informatik.uni-freiburg.de/~wxxt Currently, wxWindows is available for Windows and UNIX/GTK and both the Mac and the Motif port are progressing nicely. Python bindings are available for the Windows and the GTK port. For more information: Robert Roebling, roebling@sun2.ruf.uni-freiburg.de _________________________________________________________________ ClibPDF - ANSI C Source Library for Direct PDF Generation Date: Wed, 18 Nov 1998 14:13:44 GMT FastIO Systems announced the availability of ClibPDF: an ANSI C Source Library for Direct PDF Generation. ClibPDF offers a competition to Thomas Merz's PDFlib, but it does much more than PDFlib, particularly for graph plotting applications. For details and downloading of ClibPDF, visit our web site, http://www.fastio.com/ ClibPDF is a library of ANSI C functions, distributed in source form, for creating PDF (Acrobat) files directly via C language programs without relying on any Adobe Acrobat tools and related products. It is suitable for fast dynamic PDF Web page generation in response to user input and real-time data, and also for implementing publication-quality graph plotting for both on-screen viewing and printing in any custom application. For more information: FastIO Systems - Fast Direct PDF Generation via C, clibpdf@fastio.com, http://www.fastio.com/ _________________________________________________________________ Partitionless Installation with EasyLinux Date: Wed, 18 Nov 1998 14:20:31 GMT EasyLinux is a revolutionary new Linux distribution which eliminates the need to repartition hard drives. Instead, it creates a Linux filesystem inside a large file on the DOS partition. Unlike with umsdos, performance is not significantly affected so this mode of operation is suitable for production machines. It is still possible to repartition if you want to. EasyLinux is available in two packages. The first contains only the two CDs, and is intended for experienced Linux users. This package costs £ 4.95 (approximately $8). The second contains the CDs and a 700 page book about installing and using Linux. This package also includes technical support. The price of this package is £ 29.95 (approximately $50). For more information: Pete Chown, Pete.Chown@skygate.co.uk, http://www.skygate.co.uk/ _________________________________________________________________ tomsrtbt-1.7.0 with 2.0.36 and cetera - boot/root rescue floppy Date: Fri, 20 Nov 1998 10:47:17 GMT I've put a new 2.0.36 based tomsrtbt-1.7.0 up on http://www.toms.net/rb/. Later I'll also load it to Sunsite's Incoming to go into system/recovery. It's a boot/root rescue/emergency floppy image with more stuff than can fit. Bzip2, 1722Mb formatting, and tight compilation options helped jam a lot on. It is useful for "learn unix on a floppy" as it runs from ramdisk, includes the man-pages for everything, and behaves in a generally predictable way. "The most Linux on one floppy." (distribution or panic disk). 1.72MB boot/root rescue disk with a lot of hardware and tools. Supports ide, scsi, tape, network adaptors, PCMCIA, much more. About 100 utility programs and tools for fixing and restoring. See tomsrtbt.FAQ for a list of stuff that is included. Not a script, just the diskette image packed up chock full of stuff. Easy to customize startup and scripts for complete rebuilding. Also good as learn-unix-on-a-floppy as it has mostly what you expect- vi, emacs, awk, sed, sh, manpages- loaded on ramdisks. There is one installer that runs under Linux, another for DOS. http://www.toms.net/rb/ For more information: Tom Oehser, tom@toms.net _________________________________________________________________ mod_ssl 2.1.0 - Apache Interface to SSLeay Date: Fri, 20 Nov 1998 10:51:43 GMT This Apache module provides strong cryptography for the Apache 1.3 webserver via the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols by the help of the SSL/TLS implementation library SSLeay from Eric A. Young and Tim J. Hudson. The mod_ssl package was created in April 1998 by Ralf S. Engelschall and was originally derived from software developed by Ben Laurie for use in the Apache-SSL HTTP server project. As a summary, here are its main features: o Open-Source software (BSD-style license) o Useable for both commercial and non-commercial use o Available for both Unix and Win32 platforms o 128-bit strong cryptography world-wide o Support for SSLv2, SSLv3 and TLSv1 protocols o Clean reviewable ANSI C source code o Clean Apache module architecture o Integrates seamlessly into Apache through an Extended API (EAPI) o Full Dynamic Shared Object (DSO) support o Support for the SSLeay+RSAref US-situation o Advanced pass-phrase handling for private keys o X.509 certificate based authentication for both client and server o Additional boolean-expression based access control facility o Backward compatibility to other Apache SSL solutions o Inter-process SSL session cache o Powerful dedicated SSL engine logging facility o Simple and robust application to Apache source trees o Fully integrated into the Apache 1.3 configuration mechanism o Additional integration into the Apache Autoconf-style Interface (APACI) o Assistance in X.509 v3 certificate generation http://www.engelschall.com/sw/mod_ssl/ ftp://ftp.engelschall.com/sw/mod_ssl/ For more information: Ralf S. Engelschall, rse@engelschall.com _________________________________________________________________ multiple - an utility for comparing files Date: Mon, 23 Nov 1998 20:57:11 GMT multiple is a utility for comparing files which includes these features: * comparing all files with each other, given to multiple via command line * print out superflous files without further comments => so removing superflous files is easy * if you wish, the names of all equal files will be printed (not only superflous) * if you want, the data until the first empty line will be ignored for comparing the files (e.g. for ignoring mail-/newsheaders and comparing only the message-bodies) ftp://belug.in-berlin.de/pub/user/ob/Programs/Tools/multiple.tgz For more information: Oliver Bandel, oliver@first.in-berlin.de _________________________________________________________________ Linux Search Engine (service and download) Date: Mon, 23 Nov 1998 21:08:31 GMT Just wanted to let every one know that I have just released some new search engine software. The database is PostgreSQL, the front-end is PHP 3.x, and it runs on a Red Hat 4.2 Linux box. (or any Linux box, that's just what I'm using) As it is brand new, it is also mostly empty, feel free to put any new listings on it that you want except no porno stuff. Nothing can be seen until it is approved, I will check several times a day for stuff needing approval. I would like a lot of Linux related stuff, would like it to sort of become a specialty search engine for Linux stuff. But most any listings are welcome. If you want to add a series of new categories, email me and I can add them all at once. This version is BATA and will no doubt evolve a great deal in time to come. For any one how wants to run a search engine, lse is available for free down load at my ftp site. Find it on the lse! http://www.terrym.com/lse/lse.php3 For more information: Terry Mackintosh, terry@terrym.com _________________________________________________________________ SANE v1.00 - Scanner Access Now Easy Date: Mon, 23 Nov 1998 21:17:39 GMT The development team for SANE ( http://www.mostang.com/sane/) is proud to announce the release of version 1.00 of the SANE API, applications, and drivers. Here is a summary of the main features of SANE: * SANE is a public-domain, fully documented, and generic API that can supp * rt arbitrary image acquisition devices, such as flatbed scanners, still cameras, vide * cameras * Included drivers are released under a relaxed GPL that permits c * mmercial use. * Included applications are released under GPL. * Includes a command-line interface that provides access t * all features of all scanners. * Includes a stand-alone GTK+ based graphical user interface that pr * vides access to all features of all scanners * Supports scanning from within GIMP through a GIMP extension * Supports remote scanning across a LAN, WAN, or even the Internet * Supports dynamic loading of drivers * Runs on Linux, most UNIX platforms, OpenStep, Apollo Domain/OS, and even OS/2 * Most devices are auto-detected so no or minimal configuration is required. * Includes Java scanning application and API. For more information: http://www.mostang.com/sane/ ftp://ftp.mostang.com/pub/sane/ _________________________________________________________________ Yard 1.17 -- creates custom rescue/boot disks Date: Mon, 23 Nov 1998 20:51:48 GMT Yard is a suite of Perl scripts for creating rescue disks (also called bootdisks). A rescue disk is a self-contained Linux kernel and filesystem on a floppy, usually used when you can't (or don't want to) boot off your hard disk. A rescue disk usually contains utilities for diagnosing and manipulating hard disks and filesystems. Author: fawcett@croftj.net (Tom Fawcett) Primary-site: http://www.croftj.net/~fawcett/yard/ 160220 yard-1.17.tar.gz _________________________________________________________________ Siag Office 3.1 available for beta testing Date: Mon, 23 Nov 1998 20:56:14 GMT Siag Office consists of the spreadsheet SIAG, the word processor Pathetic Writer and the animation program Egon Animator. Changes from 3.0 include: * Multipart documents * Cross-sheet references in Siag * Unlimited font support * Unlimited user-definable style support * Unlimited colour support * Improved handling of RTF format documents * Greatly improved user interface. Sources are available from: ftp://siag.edu.stockholm.se/pub/siag/siag-3.1.0beta1.tar.gz For more information: Ulric Eriksson, ulric@edu.stockholm.se, http://www.edu.stockholm.se/siag/ _________________________________________________________________ Macsyma math software for Linux ARLINGTON, MA (November 11, 1998): Macsyma(R) math software is now available for the first time in PCs running the Linux operating system. Macsyma includes 1,300 executable demonstrations and is easily accessible at many points in the help system. Also hypertext descriptions of 2,900 topics, a browser with 900 topics and commands, and 900 type-in command templates. Macsyma 421 has client-server capability, which is particularly helpful on local area networks. Recent mathematical improvements include enhanced speed in solving linear and algebraic equations, stochastic mathematics, better evaluation of special functions, and enhanced tensor analysis. It is smarter about using the algebraic signs of expressions to simplify results. The U.S. commercial price for Macsyma 421 for Linux workstations is $249 (or $199 without paper manuals). The U.S. commercial price for Linux Macsyma with NumKit (which requires using a client running MS-Windows) is $349. Academic prices are available. For more information: http://www.macsyma.com/, info@macsyma.com _________________________________________________________________ Buildkernel 0.87 - automates the task of building a Linux kernel Date: Mon, 23 Nov 1998 21:23:23 GMT Buildkernel is a shell script that automates the task of building a Linux kernel. If you can type "buildkernel --NEWESTSTABLE", you can have a new Linux kernel on your system! Building a kernel is a complicated task for the new user. The Kernel-HOWTO is an excellent summary of how it's done, but it still takes some time and understanding to do. Buildkernel takes away a lot of the learning necessary for first time builders. For experienced users that build kernels frequently, if automates the process so it is more "hands-off". It has been tested on the x86 architecture and currently knows about lilo and boot floppies (I would like to have future releases handle syslinux, milo, silo, etc. - any takers?). http://www.pobox.com/~wstearns/buildkernel/ For more information: William Stearns, wstearns@pobox.com _________________________________________________________________ groovit - making groovy and accurate sound/noise. Date: Sat, 28 Nov 1998 11:48:28 GMT This application needs testers : A linux all-in-a-box drum-machine. Groovit is essentially a drum matrix which can handle any samples, combined with, at least and depending on the CPU strength, two analog synths voices. Any voice can go through several effects, (for instance a dynamic filter, and an echo/reverb). It is intended to be as "real-time" as possible, depending on CPU strength mostly. It computes sounds internally with 32bit range, and outputs at 16. It also has several resonant filters that quickly bring you handsome noise. complete info at : http://www.univ-lyon1.fr/~jd/groovit/ For more information: Jean-Daniel Pauget, jd@cismserveur.univ-lyon1.fr _________________________________________________________________ Remote Microscope software 1.0a1 - remote access to optical microscopes Date: Sat, 28 Nov 1998 12:10:57 GMT Version 1.0alpha1 of CNRI's Remote Microscope software is now available. The Remote Microscope system allows users to access and control an optical microscope over the Internet using a Java applet, as demonstrated at the recent Python conference. As part of the MEMS Exchange project, CNRI is working on fully automated and remotely controllable semiconductor inspection microscopes to let chip designers view their wafers from any location having an Internet connection. However, Internet microscope access can be useful in other fields, such as biology or material science. We're releasing the code for our microscope software in the hope that other people will find it useful and will contribute suggestions, improvements, ports to new systems, etc. Remote Microscope home page: http://www.mems-exchange.org/software/microscope/ For more information: A.M. Kuchling, akuchlin@cnri.reston.va.us _________________________________________________________________ XFree86-3.3.3 has been released Date: Sat, 28 Nov 1998 12:41:44 GMT The XFree86 Project, Inc., is proud to announce its latest release, XFree86-3.3.3. This is the latest in our series of "final XFree86-3.3.x release" Most of our work is focused on XFree86-4.0 these days, but the amazing shelftime of graphics hardware makes another "old design" release necessary. For more information: Dirk H. Hohndel, hohndel@suse.de _________________________________________________________________ MasterPlan 0.1.0 - Planning/Calendar software Date: Sat, 28 Nov 1998 14:17:13 GMT Calendar/planner with tasks, appointments and meetings, Reminder and scheduler functions. Planned vCalendar support and shared calendar/billborad function, etc. MasterPlan for Linux represents a new step forward for time management software. Sporting many unique and useful features, MasterPlan's ease of use makes planning your life easier than ever. MasterPlan is partly an Open Source project, and is constantly evolving in coevolution with its users. This means that your feedback is essential in determining whether the program will fit your needs in the future! MasterPlan is also commercial software - this is what we do for a living! So if you want to use it, you must pay a (reasonable) fee. But of course you get to try it first! http://www.bgif.no/neureka/MasterPlan/index.html http://www.bgif.no/neureka/MasterPlan/master_download.html For more information: Arne O. Morken, arne.morken@ii.uib.no _________________________________________________________________ Published in Linux Gazette Issue 35, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ This page written and maintained by the Editor of Linux Gazette, gazette@ssc.com Copyright © 1998 Specialized Systems Consultants, Inc. "The Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ (?) The Answer Guy (!) By James T. Dennis, answerguy@ssc.com Starshine Technical Services, http://www.starshine.org/ _________________________________________________________________ Contents: (!)Greetings From Jim Dennis (?)office server --or-- Linux as a File/Print Server for Window and DOS boxes: Of course! (?)Suggestions for Linux Users with Ultra Large Disks (?)Linux question - "out of the Blue" --or-- Listing "Just the Links": It's the only way, Luke (?)Yamaha OPL3-SA --or-- More on Linux Kernels Sound Support: Alan Cox Responds (?)X and virtual terms --or-- Some Magic Keys for the Linux Console (?)Keyboard Problem --or-- No Echo During Password Entry (?)FTP Login as 'root' --- Don't! (?)sendmail problem --or-- 'sendmail' on a Private/Disconnected Network (?)Question about networking with NetWare --or-- Needs to Login to Netware (?)FS Security using Linux --or-- Crypto Support for Linux (?)relaying still not correct ... (?)The state of UNIX in 1998 (?)A newbie question --or-- How Many Ways Can I Boot Thee: Let Me Count Them (?)Windows file systems across a linux box --or-- Programmer Fights with Subnets (?)Finding IP address with a script --or-- Using A Dynamically Assigned Address from PPP Startup Script (?)Setting up Linux to serve CD images through loopback --or-- More than 8 loopfs Mounts? (?)SV: PPP-question. --or-- Where to find Multi-Router Traffic Grabber (?)Support for the Microtek SlimScan Parallel Port Scanner (?)RedHat 5.1 and rpms --or-- RPM Dependencies: HOW? (?)modutils question (?)libc5 and libc6 (?)Linux on Dell Systems (?)How can I find this out? --or-- Remote Login as 'root' ____________________________________________________ (!) Greetings from Jim Dennis Well, it's getting close to the end of the year. So, what will I being doing: I hope to continue doing "the answer guy" --- and maybe I'll finally get around to writing some custom procmail scripts to structure it so that the Answer Guy can become "the Answer Gang" (I'd like to thank those who offered to participate in this project earlier this year. I haven't meant to snub any of you, but I haven't had any time to build on this idea either). I've been elected to the board of directors for BayLISA (the Silicon Valley and SF Bay Area chapter of SAGE, which is the USENIX Systems Administrators' Guild --- we inherited the 'e' from the creat() system call). I hope to promote better organization of system administrators in the bay area and around the world. I'll be at the annual USENIX/SAGE conference: LISA (Large Instllations System Administration) during the 2nd week of this month. I hope to finish my book real soon now. I've been courting a co-author on the project and have found someone that might be interested. This will be _Linux_Systems_Administration_ --- but should be of use to all sysadmins on all platforms. My goal in writing this is to genuinely raise the state of the art in systems administration and to provide the basis for "best practice" guidelines in the field. I started research and notes for my book about three years ago (with no intent of seeking a publisher until a good chunk of it was done). Last March an editor approach me and asked if I'd consider working on a book for them (Macmillan Computer Publishing: http://www.mcp.com/). When I agreed to work on this, the group I was working with was about as relaxed as book publishers ever get (from what I've heard). However, since Linux has suddenly become a hot topic they are now under pressure to get things rolling. When someone pops into the comp.unix.admin newsgroup or onto the linux-admin mailing list with the old question: I've just been assigned these systems what should I read --- I'd like to see my book listed along with Aeleen Frisch's _Essential_System_Administration_ (O'Reilly & Associates), a.k.a. "the armadillo book" and the _Unix_System_Administrator's_Handbook by Evi Nemeth et al (Prentic-Hall, a.k.a. "the cranberry book"). The other major project I have on the horizon is a half day seminar/tutorial on the subject of "Linux Security for the System Administrator" to be presented at the upcoming LinuxWorld Expo (http://www.linuxworldexpo.com) My goal for that is to show enough admins enough about securing their Linux systems from common threats that Linux can shed its reputation for being "easy" to break into. (Of course, everyone reading this can get a head start by reading Dave Wreski's Security Admin Guide (http://nic.com/~dave/SecurityAdminGuide/) and his Security-HOWTO (http://sunsite.unc.edu/LDP/HOWTO/Security-HOWTO.html at your usual LDP mirror site. Dave gets "The Answer Guy" support award of the month for his work on these documents and for his participation on the linux-admin mailing list. Other than than, I'll need to get a lot more consulting done next year since I've devoted a bit too much of this year to writing TAG and my book. (My wife, Heather has been gracious enough to support me while I'm pursuing these new vocations). [I also work on a preprocessing script and then polish up the HTML for this column every month. -- Heather] So, it looks like a busy year for me as well as the rest of the Linux community. Happy Thanksgiving, everyone. ____________________________________________________ (?) Linux as a File/Print Server for Window and DOS boxes: Of course! From jimr on Sat, 07 Nov 1998 Is it possible to set up a linux file and print server in an office of 95,98 & DOS? (!) It is a very popular application for Linux boxes. You can easily take any old 386, 486, or Pentium with 16 or 32 Mb and an ethernet card (or two) and install Linux and Samba. Samba is a popular Unix package for providing SMB file and print services. SMB is the technical name for the set of protocols that Windows NT, '95, '98, and OS/2 LANMan and LANServer (among others) all used for file and print sharing. Samba was written by Andrew Tridgell has been enhanced by a host of others (much like Linux itself). While much of the development of Samba has been done on Linux --- it's worth noting that many of the Samba developers also work on FreeBSD and some even work on Solaris, SunOS, Irix, and other traditional forms of Unix. The code is quite portable. The master web server for Samba is at: Australian National University: http://samba.anu.edu.au/samba/samba.html .. there are mirrors world-wide. Note that Samba come with most Linux distributions. Also note that the Samba team is pretty close to releasing version 2.0 which will include some code to support DC services (allowing your Linux box to act as a "Domain Controller" a PDC or BDC for your NT systems). It's also worth noting that your MS-DOS machines must be outfitted with TCP/IP suites to talk to Samba. I don't know of a Unix implementation of the NetBIOS networking protocols (the lower layer protocols over which the "server message blocks" of SMB are transported). Another alternative is to run Netware for Linux (available from Caldera: http://www.caldera.com) and have your MS-DOS systems access their file and print services via IPX protocols. (I always found the IPX drivers for DOS to be the quickest, most stable, and compatible and to have the most modest memory footprint of any networking drivers on the platform --- I always attributed Novell's huge success to those qualities). There is also a free "Netware emulator" called "Mars_nwe" --- that may also be sufficient for your MS-DOS systems. You may also want to consider switching some of your DOS systems to Linux with DOSEmu (a BIOS/system emulator for running a copy of DOS). You can also consider installing Caldera/DR-DOS as an alternative to MS-DOS. Basically MS isn't upgrading DOS any more, but Caldera and the Linux community are. In any event Netware is not free software. Samba is. However, you can run them concurrently on the same server (although I'd suggest a Pentium with 64Mb of RAM if you're going to run those and the obligatory intranet web, mail, and other services on the one host). Note that processor speed is not much of an issue here --- all of these services take very little processor power, and Linux doesn't require that you load the system with alot of unnecessary support (like all kinds of GUI baggage) when you just want to run a server in the closet. If you hook up a typical cheap laser or inkjet printer or two to the system, you can configure Linux to handle PostScript (TM) print jobs using the ghostscript drivers (a package that implements the PostScript (TM) language on the host computer and supports a large number of common printers. Be sure to get a printer that is NOT a "winprinter" (a print engine with essentially no embedded system --- which relies on PROPRIETARY drivers to drive it). The problem with these is that the manufacturers won't (or can't) release the specifications to allow Linux developers to write Linux native drivers for them. So you can only run these printers from Windows systems. (Basically it's a ripoff. You pay almost as much for a much less sophisticated printer that will probably be rendered temporarily useless with every Microsoft OS upgrade --- since the old drivers will almost never work with their new OS versions). I suggest that people considering Linux start with the Hardware-HOWTO at: http://sunsite.unc.edu/LDP/HOWTO/Hardware-HOWTO.html (and any LDP mirror). The SMB-Howto by David Wood seems to be pretty old --- and I know that Samba has been upgraded quite a bit since August of '96 --- so we probably need to find someone revise this HOWTO. However, most of the principles and examples should still work --- so it's a good place to look. Be sure to read the FAQ at the ANU site, though. There's a whole newsgroup devoted to the topic: news:comp.protocols.smb --- and Samba is the most common topic of discussion there. ____________________________________________________ (?) Suggestions for Linux Users with Ultra Large Disks From John Newbigin on Fri, 06 Nov 1998 In response to your note about Suggestions for Linux Users with Ultra Large Disk, here is my suggestion Create a small partition at the start of the disk, say 10 meg should be plenty, you could get away with ~2 if you are stingy. Use this partition to store the kernel/kernels used to boot linux. You can then create a root partition as large as you like, set lilo up to use the kernel from the first partition and away you go. You would only need to mount the partition if you are going to add a new kernel or run lilo. You could even put kernel modules on the partition if you wanted. (I have not tried this myself, but I see no reason why it should pose a problem) As for the 8gig limit, I have an 8.4 gig HD, and linux 2.0.34+ don't have a problem. They do some kind of translation on boot, but it works without any problems. John. UNIX is user friendly. It's just selective about who its friends are. (!) It's an excellent suggestion. I've heard variations of it many times --- but many of them haven't explained it as clearly as this. Let's say make I create this filesystem (/dev/hda1) and then a root filesystem (/dev/hda3 --- we'll say that hda2 is swap). I should create a mount point (let's call that /mnt/kernelfs) which is where I mount /dev/hda1 when I need to update a kernel and/or run /sbin/lilo for any reason. The rest of the time /dev/hda1 doesn't have t be mounted. In fact we don't need to reserve a special mount point (/mnt/kernelfs) for it at all --- that's just a bit of syntactic sugar that "self documents" what we're doing in the /etc/lilo.conf and other configuration files and scripts. I've tried many times to explain that LILO doesn't care about filesystems. /sbin/lilo needs to see files in order to interpret the configuration directives and put the LILO boot blocks and maps in the correct places. One of these days it will sink into the consiousness of a critical mass of Linux users. (Then someone will patch the ext2fs superblock to automatically bootstrap kernels by name and 90%+ of the Linux users won't care about LILO). In any event, I've also suggested that such users actually put a whole rootfs unto such a small partition --- an "altroot." This can be faster and handier than a boot/root diskette and can give you a way to test new kernels more easily with less risk. When testing new kernels you sometimes needs to replace some utilities. Back in 1.3 to 2.x we had to do the whole procps suite recently it's been the 'mount' command, and some others. Having the whole original suite on your altroot can make for a much easier time of it! Also, the "autorecovery" configuration that I talked about last month requires an extra root partition. If you ever want to experiment with that --- you want to create that "little root" partition from the start. Another advantage of the "altroot" variant of this suggestion is that it's actually a little easier to implement. Most distribution setup/installation scripts can handle a "minimal" installation (in 64Mb or less). So you essentially just do your Red Hat, Caldera, S.u.S.E. or Debian install twice. Once is the 'short form' to just create the altroot. The other is your "real" installation (with all the bells and whistles). ____________________________________________________ (?) Listing "Just the Links": It's the only way, Luke From Jerry Giles on Thu, 05 Nov 1998 Sorry for the intrusion but I came across your name while browsing for Linux. I am currently in a CIS program at the local college and a recent test had an item I still can't find the answer to. The professor asked what command to use to list "only the linked files" in a directory. He is expecting us to use ls with flags, I guess, but I've looked at all the flags given in the text and nothing seems to address this. Can you help? Thanks, jerry giles (!) Either you misunderstand, or your professor isn't being very precise. The 'ls' command "lists links" --- all directory entries are links! Some of these are symbolic links; others are "hard" links (which we think of as "normal" directory entries. The 'ls' command can't list anything but links. I can list other information that it extracts from the inodes to which each of these links points (via the stat() function). So, the question is essentially meaningless as you've relayed it. Now, if the question was about listing symbolic links there are a couple of simple answers that do make sense. ls -l | grep ^l ... this filters a "long" listing of all the links (hard and "symbolic") and displays only those which start with the letter l. In a "long" directory listing the first block of characters (field) is a string which encodes the type and permissions of the files to which these directory links point. (l is "symlink", d for "directory", s for "socket", p for "FIFO/named pipe", b and c for "block" and "character" special device nodes --- normally only found under the /dev/ directory --- and "-" (dash) for "regular" files). The second field in a long listing is the "link count." This tells you how many "hard links" point to the same inodes that this one does. Here's an example of my own root directory drwxr-xr-x 14 root root 1024 Sep 27 17:19 . drwxr-xr-x 14 root root 1024 Sep 27 17:19 .. -rw-r--r-- 2 root root 219254 Sep 27 17:19 System.map drwxr-xr-x 2 root root 2048 Sep 12 03:25 bin drwxr-xr-x 2 root root 1024 Sep 27 17:20 boot drwxr-xr-x 2 root root 1024 Aug 31 06:40 cdrom drwxr-xr-x 21 root root 4096 Nov 4 03:12 etc lrwxrwxrwx 1 root root 15 Apr 20 1998 home -> /usr/local/home drwxr-xr-x 5 root root 2048 Sep 16 23:48 lib drwxr-xr-x 2 root root 12288 Mar 10 1998 lost+found drwxr-xr-x 9 root root 1024 Aug 31 06:40 mnt lrwxrwxrwx 1 root root 14 Mar 31 1998 opt -> /usr/local/opt dr-xr-xr-x 63 root root 0 Oct 13 02:25 proc drwx--x--x 13 root root 2048 Oct 31 17:47 root drwxr-xr-x 5 root root 2048 Sep 16 23:48 sbin drwxrwxrwt 8 temp root 3072 Nov 5 09:33 tmp drwxr-xr-x 30 root root 1024 Aug 31 13:32 usr lrwxrwxrwx 1 root root 13 Aug 31 06:40 var -> usr/local/var -rw-r--r-- 1 root root 732668 Sep 27 17:19 vmlinuz This was generated with the command: 'ls -al /' The number in the second field (the first number on each of these lines) is the "link count." This is the number of hard links (non-symlinks) that point to the same inode. Thus my rood directory has 14 links to it. The ".." entry for each of /'s subdirectories points back up to it. In other words /usr/.. points back to /, so do /etc/.., /dev/.., and all the others that are just one level down from it. /usr/local/.. points to /usr and so on. We see that 'System.map' has a link count of 2. That means that there is another name for this file. Somewhere on this filesystem there is another hard link to it. Most Unix newbies are using to thinking of the 'ls' command as a listing of files. This is wrong. The 'ls' command is a listing of links to files. When you add parameters like "-l" to the 'ls' command, you are listing the links, AND SOME INFORMATION ABOUT THE FILES TO WHICH THEY POINT. (Under the hood the 'ls' command is "stat()'ing each of these entries). A Unix/Linux directory consists of a list of names and inodes. All of the rest of the information that we associate with the file (its type, ownership, permissions, link count, all three time/date stamps, size, and --- most importantly --- the list of blocks that contains the file's contents, all of this is stored in the inode). To understand the difference better, create a subdirectory (~/tmp/experiment). Put a few arbitrary links into that (use the 'ln' command to make "hard links" and the 'ln -s' command to make some symlinks, and maybe some 'cp' commands to copy in a few files). Now use the 'chmod' command to remove your own execute ("x") rights to that directory ('chmod a-x ~/tmp/experiment'). * (technically this is a "demonstration" rather than a true "experiment" but that's a bit of scientific method hairsplitting that I'll only mention in passing). You should be able to do an 'ls' command (be sure to use the real 'ls' command --- NOT SOME ALIAS, SHELL FUNCTION OR SCRIPT). That should work. (If it doesn't --- you probably have 'ls' alias'ed to 'ls --color' or something like that --- try issuing the command /bin/ls, or try the command 'unalias ls' for the duration of this experiment). When you can issue the 'ls' command, with no arguments and get a list of the file names in the "~/tmp/experiment" directory then try 'ls -l' or 'ls -i' You should get a whole stream of "Permission denied" messages. Note that you also have to do all of this from outside of the directory. Issuing the 'cd' command to get into a directory requires that you have "execute" permission to that directory. The reason that you get these "Permission denied" errors is because, to give any other information about a file (other than the link names) the 'ls' command needs to access the 'inodes' (which requires "execute" permissions for a directory). You can do an 'ls' or an 'ls -a' on the directory --- because these only provide lists of the link names. These variations of the command don't need access to any other information about the files (which is all stored in the inode). So, now that you (hopefully) understand what links really are --- you can understand something about the 'rm' command. 'rm' doesn't remove files. 'rm' remove links to files. The filesystem driver then checks the link count. If that's "zero" (and there are no open file descriptors, processes with the file open) then the file is actually removed. Note the important element here: file removal happens indirectly, as part of the filesystem's maintenance. The 'rm' and similar commands just call "unlink()" (the system call). There was also an extra clause I snuck in. If I open a file (with and editor, for example) and then I use 'rm' to remove that file, what happens? (Let's assume that there was only one hard link to the file). Nothing spectacular. The link count is zero but the file is open. The filesystem maintenance routines leave the inode and the data blocks to the file alone so long as the file is open. As soon as the file is close, these routines will detect the zero link count and then remove the file. If a dozen processes have the file open --- than all of them must close it before the file is truly removed. Removal actually involves a few steps. All of the data blocks that are allocated to the file are reassigned to the "free list." You can think of the free list as a "special file" that "owns" all of the free space on the disk. The actual implementation is different for different fileystems. Then the inode is marked as deleted, or its "zero'd out" (filesystem and version specific). Now, back to your original question: A more precise way to find all of the "symlinks" in a directory is to use the 'find' command. Try the command: find / -type l -maxdepth 1 -print ... (GNU 'find' defaults to "-print" so you can leave that off under Linux). The "maxdepth 1" part is to prevent 'find' from traversing down the whole file tree. (Note: I tend to use "file tree" or "file hiearchy" to refer to all the files *and all the mounted filesystems* below a point, and "filesystem" to refer to all of the files on a single mounted fs. This is a subtle point of confusion). Now, if the question was "find all of the regular files with a link count greater than 1" you'd use: find ... -type f -maxdepth 1 -links +1 ... where the ellipsis is a list of one or more directories and/or filenames and the other parameters test for the various conditions that I described (and prevent traversal down the tree, of course). In GNU find many of the numeric conditions can be specified as "+x" "x" or "-x" --- where +x means "more than 'x'", -x means "less than 'x'" and just x means "exactly x." That's a subtlety of the 'find' command. A last interpretation of this question that I can imagine is: find all of the links to a given file (inode). To do this you start with the inode. If it is not a directory (*) and it has a link count of more than one then search the whole filesystem for any other link that has a matching inode. This is a non-trivial question to a first term Unix student. It entails writing a script in a few parts. * (We don't have to search for the additional hard links to directories, because they should all be in ./*/.. --- that is they are all . or .. entries in the current directory and the ones just below us. If you were to use some custom code for force the creation of some other hard link to a directory --- fsck would probably have fits about the anomaly in the directory structure. Some versions of Unix have historically allowed root (superuser) to create hard links to directories --- but the GNU utilities under Linux won't allow it --- so you'd have to write your own code or you'd have to directly modify the fs with a hex editor). I'll just walk through one example to get us warmed up: In my root directory example above I saw that System.map had a link count of 2. It's a regular file. So I want to find the other link to it. First I find the inode. 'ls -ail /' gives us: 2 drwxr-xr-x 14 root root 1024 Sep 27 17:19 . 2 drwxr-xr-x 14 root root 1024 Sep 27 17:19 .. 13 -rw-r--r-- 2 root root 219254 Sep 27 17:19 System.map 4019 drwxr-xr-x 2 root root 2048 Sep 12 03:25 bin 56241 drwxr-xr-x 2 root root 1024 Sep 27 17:20 boot 14 lrwxrwxrwx 1 root root 13 Aug 31 06:40 var (etc). ... the numbers in the first field here are the inodes --- the filesystem data structures to which these links point. We note that the '.' and '..' (current and parent directories) both point to the same inode *for the root directory*. (For any other directory this would not be the case). ... so I want to find all links on this filesystem (*) which point to inode number 13. * (not on any other filesystem that's mounted --- they each have their own inode number "13") So, here's the command to do that: find / -mount -inum 13 ... whoa! That was easy. The "-mount" option tells the find command not to traverse across any mount points (it's the same as the -xdev option). To do this for each of the items in a directory -- the hard part is to find the root of the filesystem on which each file resides. In my example this was deceptively easy because the link I was looking at was in the root directory (which obviously is at the root of its filesytem). If I had a script or program that would "find the root of the filesystem on which a given file resided" (let's call it "fsrootof" --- then I could write the rest of this script: find ... -type f -links +1 -printf "%i %p\n" | while read i f; do find $(fsrootof $f) -mount -inum $i done ... this is a bit of shell script code that uses 'find' to generate a list of the inodes and names/paths (the -printf option to the first 'find') of "regular files" with link counts greater than 1. That list is fed into a simple shell loop (a mill) that reads each line as a "inode" and a "patch" (later referred to as $i and $f respectively). The body of that loop calls my mythical script or program to find the "root of the filesystem of the file" --- and use that as the search point for the second find command. Just off hand I can't think of a way to implement this 'fsrootof' command using simple shell scripting. It would probably best be done as a C program or a Perl script (making direct use of some system calls to stat the file and some other trick to traverse upwards (following .. links) until we cross a mountpoint. I'd have to dig up the sources to the 'find' command to see how they do that. So, maybe I'll leave that as the "Linux Gazette Reader Challenge" (implement 'fsrootof' as described above). ____________________________________________________ (?) More on Linux Kernels Sound Support: Alan Cox Responds From Alan Cox on Thu, 05 Nov 1998 Linux 2.1.12x suppors the OPL3SA/2/3 cards. Also the new 2.1.x modular sound gets periodically folded back into an upgrade patch set for 2.0.x on ftp.linux.org.uk:/pub/linux/alan Hannu isnt involved in the current sound work, while a large chunk of it is still built on his efforts its best to direct sound queries to sound-list@redhat.com for the modular and 2.1.x sound (as well as 'my card isnt supported' type stuff. Hannu can now concentrate on his commercial work, we concentrate on the free stuff and everything seems to be working out well that way. Alan (!) Thanks for clarifying that for me. I always appreciate it when the real experts notice my little tech support efforts and can get in here and straighten me out. Do you really want to get sound support questions at your Red Hat address, even if they aren't related to the Red Hat distribution? Speaking of the efforts on 2.0.x --- is it becoming a race to see if 2.0.36 ships before 2.2? I presume that some maintainance work will be committed to 2.0.x for a few month after the 2.2.x release in any event --- though, I'd also expect it to be relatively minor fixes and device driver backports. Is that about right? Are you going to USENIX/SAGE LISA in Boston? ____________________________ (?) Jim Asked, Alan Answers From Alan Cox on Thu, 5 Nov 1998 when the real experts notice my little tech support efforts and can get in here and straighten me out. Do you really want to get sound support questions at your Red Hat address, even if they aren't related to the Red Hat distribution? (!) sound-list is a mailing list not my address. Red Hat funded the initial modular sound patch, but its the right place for new card support, 2.1.x and 2.0 modular sound (ie the stuff RH and I think now some other folk ship by default) (?) Speaking of the efforts on 2.0.x --- is it becoming a race to see if 2.0.36 ships before 2.2? (!) No Linus is a few laps behind ;) (?) I presume that some maintainance work will be committed to 2.0.x for a few month after the 2.2.x release in any event --- though, I'd also expect it to be relatively minor fixes and device driver backports. Is that about right? (!) I'm expecting 2.0 to stay in heavy use for another 2 or 3 years at least, and that there will be a continued flow of 2.0.x patches/bug reports. A lot of commercial users don't care what 2.2 does, their web site has been up for 250 days with 2.0.x and they aren't going to upgrade. And since we arent microsoft, they wont have to... (?) Are you going to USENIX/SAGE LISA in Boston? (!) Nope Alan ____________________________________________________ (?) Some Magic Keys for the Linux Console From Anthony Gabrielson, on Mon, 02 Nov 1998 Hello, One of my co-workers runs sco unixware 7. Under X he can switch off between the GUI and GUI by alt F1 F2 etc ... he can also startx in thos terms if he wants. Can this be done under Linux right now. If not is any one working on it? Thanks Anthony Gabrielson (!) This is a fairly common source of confusion for new Linux users. You can use [Ctrl]+[Alt]+[Fx] to do this using XFree86 (the free X server for Linux, FreeBSD, etc). I presume you could also remap your [Alt]+[Fx] keys to do it, probably using 'xmodmap' You can also use an 'xterm' command, menu entry or icon to do this --- using the 'chvt' command that's included with most distributions. Note: You can usually also "back out of" XFree86 using [Ctrl]+[Alt]+[BackSpace]. This basically provides a "vulcan nerve pinch" or "three finger salute" for the X windowing system, without having to reset the rest of the OS. Speaking of "three finger salutes" there are some neat options in the 2.1 kernels if you enable the "Magic SysRq" option when you build you new kernels. These give you various commands using [Alt]+[SysRq/Print Screen]+? options. For example you can use "Magic SysRq"+[s] to "Sync all filesystems." There are other combinations to restore you keyboard from "raw" mode, kill all processes that are attached to the current virtual console, remount your filesystems in "read-only" mode, dump tasklists, and register or memory status to your console, and to set various signals to all processes below 'init.' These is supposed to work no matter what else the kernel is doing. You can read more about these in: /usr/src/linux/Documentation/sysrq.txt (It's a fairly obscure fact that the 2.0 kernels had some similar console keyboard features. You could invoke register, memory, and task list dumps using [Alt]+[ScrollLock], [Shift]+[ScrollLock], and [Ctrl]+[ScrollLock] respectively). In addition most versions of the Linux kernel (back to 1.2 or earlier) would allow you to use [Shift]+[PgUp] to view a small backscroll buffer for the current VC. This buffer gets wiped on a virtual console switch (unlike the FreeBSD [ScrollLock] feature which is maintained for every VC). Another key binding that many Linux users don't know about is the [Alt]+[Left Cursor] and [Alt]+[Right Cursor] bindings, which will cycle among your virtual consoles (VC's). In other words if you are on VC4 and you use [Alt]+[Left Cursor] you'll be switched to VC3 while [Alt]+[Left Cursor] would move you to VC5. If you reconfigure your system to provide logins on more than 12 virtual consoles (just edit /etc/inittab in the obvious way --- and make sure you have the corresponding /dev/tty* nodes) --- you can get to the second "bank" of VCs using the other [Alt] key (the right one). If you had more than 24 you'd presumably have to use the [Alt]+{cursor keys} to get at them. Of course you can customize most of these to your heart's content. Look for the following man pages for more details: loadkeys (1) dumpkeys (1) showkey (1) keytables (5) ... and look through the whole "kbd" package for 'chvt' and other commands. There's also supposed to be an improved set of console tools (the "console" package?) which should be at Sunsite (http://sunsite.unc.edu/pub/Linux) somewhere. So you can customize your console's keyboard bindings without even having to patch a kernel. Incidentally, I get around the lack of real console backscroll buffers by just running 'screen' --- which also allows me to detach my processes from one terminal and re-attach to them in another. This is very handy when I'm working on a VC (as I usually do) and I need to look something up in Netscape --- if I think that Lynx just isn't getting what I need. I detach my 'screen' session, switch to my X session (which stays on VC13 for me, and VC14 for my wife's session), then I re-attach from any available 'xterm' I can then cut and paste between my X applications and the emacs that I've been running all along. 'screen' also give me keyboard driven cut-and-paste between console/text/curses applications. I personally prefer this to 'gpm' old 'selection' features --- though I tend to use both occasionally. So, does that list of options block the sockets off of SCO? ____________________________ (?) Anthony Replies... From Anthony Gabrielson, on Wed, 04 Nov 1998 Jim, Thank You for the help - I don't care for sco, however that co-worker kept coming at me w\ can it do this and that. I was stumped on this one. Thanks Again, Anthony (!) I figured. About the only things the SCOldies can hold over us right now are "journal file support" and "Tarantella." Just SCOld him with an observation that engineers from SCO were making much ado about their recent addition of Linux binary compability support --- the ability of SCO to run Linux binaries; at last years USENIX in Louisiana. Then ask if Microsoft has sold off the last of their SCO stock yet . ____________________________________________________ (?) No Echo During Password Entry From jdalbert on Wed, 04 Nov 1998 Hi Jim...I'm new to Linux and am trying to install Redhat version 5.1. I get as far as the keyboard password and my keyboard will not allow me to type any characters. It will allow me to tab or use the arrows but the keys do not move when pressed. I do not know who to ask for help and while browsing the linux site, I came across your name. Can you give me any advice as to how to get around the Root Password problem. Do I go into setup and check to see if I have Aami Bios and make changes? I'll look forward to hearing from you. Thanks, Joe D'Albert (!) If I understand you correctly -- you are just confused. The fact that the installation's prompt (dialog) for establishing the root password doesn't echo any characters, stars, nor even register/respond with cursor movements is PERFECTLY NORMAL. (It's a feature. It's supposed to work that way. Don't worry about it. Just type "blind"). It's going to ask you to repeat the password (any password you choose) twice. That's to ensure that you know what you typed. (The assumption is that you're unlikely to make the same typo or mistype twice in a row --- so if the two entries match one another, than you can probably manage to keep typing your password that way forever). Note that it usually will do the same thing after you've got the whole system installed and configured. When you login, it will ask for a password. When a Linux system prompts you for a password during login --- you won't see any characters or cursor movement as you type. This is intended to prevent someone from watching over your shoulder, even to find out how many characters are in your password. Just type you password slowly and carefully. Make sure not to miss any keystrokes (by hitting the keys squarely) and make sure not to "bounce" the keys --- getting "double images" for some characters. As long as you do that you should be fine. I noticed that Lotus Notes used to respond to each keypress in the password prompt by echoing a small random number (2 to 5?) of *'s. This was a convenient way to give keyboard feedback without revealing your password length. Many systems will echo *'s for each character typed. Incidentally the Linux passwords have NOTHING to do with any CMOS/Setup (BIOS) passwords that you may have on your system. Linux (and other forms of Unix) are multi-user systems. They maintain a list of accounts (in the /etc/passwd file) that provide for all access to the system. The main benefit of this is that you can create a Joe account (joe, jdalbert or jda or ja or whatever reasonable login name you want to use). You normally long in under this account. While using your account you run very little risk of damaging any system files. If you run a "bad" program --- that program will usually be unable to damage the system (infect system binaries with a virus, for example). You should only use the 'root' account for maintaining the system --- almost exclusively for adding new accounts, disabling old ones, and installing or upgrading your main system software. You can use the 'passwd' command to change your password at any time. If you forget your personal (joe) password you can login as root and issue a command like 'passwd joe' to force a change on the password for any account on the system. (Thus, if you create an account for your wife, girlfriend, kid, roommate, dog, cat or whatever --- and they forget their password --- can't get it back for them, but you can just give them a new one). Read the 'passwd' and 'usermod' man pages for details on that and other tricks. If you should ever lose the root password you can reboot the system (in single-user mode, or possibly you'll need a rescue diskette --- if 'sulogin' is configured). If you've booted from diskette you'll have to mount the filesystems that you normally boot from (usually something like /dev/hda3 for a partition on your first IDE drive, or /dev/hdb1 for one on your 2nd IDE, or /dev/sda1 for one on your first SCSI drive). Let's say you mount that under /mnt/ (this is the floppy diskette's /mnt directory. Once you've done that you'd change (cd) into that directory, and use a command like 'chroot . /bin/sh' --- which essentially "locks you into" that (floppy's /mnt) directory as though it were the root directory. (This process is a bit confusing --- but the purpose is to let you do the rest of these commands as though you'd booted from the hard drive in the first place. You could skip this step if you know how to issue all of the following commands while adjusting for the floppy/factor). From there you can use a text editor on the /etc/passwd (and possibly the /etc/shadow) files, or you issue the 'passwd' command to force a change to 'root's password. If you booted from floppy/rescue diskette, you'd now type "exit" (to exit from the 'chroot shell' that you invoked above). Then you'd unmount ('umount') the filesystems that you'd used and reboot. (Note: If the last five paragraphs sounded confusing and intimidating --- take it as a warning: DON'T LOSE YOUR ROOT PASSWORD! You can recover from it, but you have to do some fussing. If you lose any other user's password, you can just log in as 'root' and do a forced change to fix it.). ____________________________________________________ (?) FTP Login as 'root' --- Don't! From Henry C. White on Fri, 30 Oct 1998 Hi, I would like to ftp to my linux PC and login as root. When I have tried this I get an access denied. Please help me in how to configure to allow this. I an runnung linux RedHat 5.1. Thanks Henry White (!) Most FTP daemons (the server software to which your ftp client connects) check the /etc/ftpusers file for a list of users that are NOT allowed to access the system via FTP. This file normally includes a list of all (or most) of the "psuedo-users" on the system. (psuedo-users is a term to describe all those accounts in your /etc/passwd file that don't correspond to real users at your site). Another check which is made by most FTP daemons is to scan the /etc/shells file for one that corresponds to that of the user who is attempting to login. Normally the /etc/shells file is a list of all of the valid 'login' shells on the system. If I want to prevent a group of users from accessing normal shell and FTP services on a system I can change their shell to something like /bin/false, or /usr/local/bin/nologin (presuming that I write such a program). Then I just make sure that this program is not listed in /etc/shells, and the user will be denied FTP access. (Their login via telnet would still be allowed, but a proper (true binary) /bin/false will just immediately exit, and one would presumably write /usr/local/bin/nologin to write an error message and exit. If I want to have some accounts that are only allowed access via FTP (and not given normal shell accounts) I have to do a few things. First I set their login shell (as listed in the last field of the /etc/passwd file) to /usr/bin/passwd (if I want them to be able to set and change their own passwords), or I create a link from /bin/false to /usr/local/bin/ftponly. Then I add one or both of those to /etc/shells. If you add a new shell to the system (someone writes a niftysh -- that you've just got to have) then you should add it's full path name to the /etc/shells list. This technique, for limiting an account to FTP only actually requires more work than I've described. If I stopped at this point a user could create a .rhosts file in their home directory and run interactive shell commands via the r* tools. The user could also create .forward and/or .procmailrc files that would allow them to execute arbitrary commands on my systems (including a 'chsh' command to change their shell to bash, csh, etc). So, I usually use the wuftpd (Washinton University FTP deamon) "guestgroup" features. This is controlled by declaring one or more groups (entries in /etc/group) to be "guestgroup"s in your /etc/ftpaccess file. /etc/ftpaccess is used by wuftpd (and I think Beroftpd, a derivative therefrom). Then I add the "ftponly" users to that group (cleverly named "ftponly" in most cases), and change their "home" directory to point to some place under a chroot jail, using a clever/hackish syntax like: joeftp:*:1234:3456:Joe FTPOnly Dude:/home/ftponly/./home/joe:/bin/passwd ... note the /./ to demarque the end of the "chroot" jail (a standard FTP "home directory tree" with its own .../bin, .../etc/, and .../dev directories). When Joe Dude logs in (via FTP) he'll be chroot()'d to /home/ftponly and chdir()'d to .../home/joe under that. Normally we won't allow Joe to own .../home/joe, and we won't allow write access to that "home" directory. We can create an incoming directory below that if necessary. If our need to create these "FTP only" accounts is such that we must not chroot() the client --- we can just chown the user's home directory (to 'root') and remove write access to it. This will prevent the creation of those various "magic files" like .rhosts, .ssh/*, .forward, .procmail, .klogin, etc. There are other approaches to these issues. With PAM (Pluggable Authentication Modules), which has been the default set of libraries for the whole suite of Red Hat authentication programs for the last couple of versions of that distribution, you can configure each service to look into a file like /etc/ftpusers (any file you like) --- and limit each user's access to each service. You can also limit access based on time of day, day of week, terminal and/or source address of the connection, require one-time-passwords, etc. Unfortunately, this isn't well documented, yet. (I've been raising dust on the PAM list recently --- since they've been hovering at "version 0.6" for over a year. Some of them seem to think that version numbers don't matter at all --- that it's just "marketing fluff" --- I think that the integration of the suite and the "official release" is crucial to it's eventual adoption by other distribution maintainers, and admins/users). Another approach is to just disable all of the "other" services. That's great when you're setting up a dedicated ftp server. You could also go in and manually hack the sources to all of the services that you do need, to add the additional checks and the enforcement of your policies. That's precisely the problem that the PAM project has sought to solve. Yet another approach is to replace your FTP daemon. For example the shareware/commercial 'ncftpd' allows you considerable control over these things. It's the product I'd recommend for high volume FTP servers (http://www.ncftp.com). Back to your original question. You can probably enable 'root' access via FTP. However, I don't recommend it. You'd really be much better off using 'ssh' (the 'secure' rsh, with 'scp' instead of 'rcp', etc). The best bet is to use 'rsync' over 'ssh' --- to distribute files as 'root' to the systems you're trying to administer. (The only sane reason to want to send files to or get them from a system "as root" is for remote administration). ____________________________________________________ (?) 'sendmail' on a Private/Disconnected Network From RoLillack on Tue, 10 Nov 1998 Dear Answer Guy! I set up a small network at home with my Linux box beeing 192.168.111.111, my father's Windooze box beeing ...112 and my brother Max' Linux system (root gets mounted using nfs!!!) ...113 (mine is called pflaume.lillax.de and my brother's: birne). Both Linux machines use RedHat 5.0. (!) Nice trick using nfsroot there. (?) Nearly everthing works well, we use http, ftp, nfs and samba without problems. But when I tried to send an email to my brother's machine or vice-versa, sendmail sent a warning, that it could not send the mail for 4 hours and mailq tells me: "Deferred: Name server: birne.lillax.de: host name lookup failure" So I tried mailing to max@192.168.111.113 and mailq says "host map: lookup (192.168.111.113): deferred" I don't know what I did wrong, our hosts file has the right entries and this is the output of ifconfig and route on my machine (on Max' system it nearly looks the same): (!) 'sendmail' doesn't use /etc/hosts. The standards require that it use MX records. It can also use NIS maps (the default on many versions of SunOS and Solaris). If you really mailed it to max at the IP address, it should have bypassed the MX lookup. However, to use an IP address in your mail you should enclose it in square brackets like: max@[192.168.111.113] ... which is a trick I've used to configure the systems internal to my LAN (no DNS) to forward to my uucp hub via SMTP. In other words 'antares' is my mail server. It exchanges mail with my ISP over dial-out UUCP. My users fetch their mail from antares via POP using Eric S. Raymond's 'fetchmail' The workstations that we use are configured with the "nullclient.mc" file and the "hub" defined by IP address like so: divert(0)dnl VERSIONID(`@(#)clientproto.mc 8.7 (Berkeley) 3/23/96') OSTYPE(linux) FEATURE(nullclient, `[192.168.64.1]') That's my whole starshine.mc file for all of the workstations on my LAN. They relay all mail to 'antares' with not DNS/MX lookups. > ifconfig: > lo Link encap:Local Loopback > inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 > UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1 > RX packets:1912 errors:0 dropped:0 overruns:0 > TX packets:1912 errors:0 dropped:0 overruns:0 > eth0 Link encap:Ethernet HWaddr 00:60:8C:51:CD:AA > inet addr:192.168.111.111 Bcast:192.168.111.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:2259 errors:0 dropped:0 overruns:0 > TX packets:554 errors:0 dropped:0 overruns:0 > Interrupt:12 Base address:0x340 > route: > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > localnet * 255.255.255.0 U 0 0 1 eth0 > loopback * 255.0.0.0 U 0 0 2 lo > ------------------------------------------------------- (?) ...with "localnet" meaning "192.168.111.0"... I'm looking forward to your answer. Thank you! Robert PS: If I mail to "root@localhost" I get the message, but if I send it to "root@127.0.0.1" it doesn't work ("deferred" message as above). Has this something to do with my real problem?!? (!) This further supports my theory. Try a suitable variant of my nullclient.mc file, build a sendmail.cf file from that using a command like: m4 ../m4/cf.m4 your.mc > /etc/sendmail.cf ... from /usr/share/sendmail/cf or /usr/lib/sendmail-cf/cf or wherever Red Hat puts it in your version. ____________________________________________________ (?) Needs to Login to Netware From dave.thiery on Tue, 10 Nov 1998 Dear Answerguy, I recently installed RedHat 5.2 on my laptop(as a dual boot with Win95 which I need for work). What I would like to do is to be able to log into my company's NetWare server and access the network along with the internet through Linux. I have a IBM 380XD laptop with a 3Com 3C574-TX Fast EtherLink PC Card. Any suggestions? Thanks! Dave (!) I'll assume that you have your ethernet card working. Caldera (http://www.caldera.com) offers a Netware client as part of their distribution. I've heard that this can be used with other distributions --- but you'll want to check with them (read their notes) to determine if this is legal as per their licensing. There is a freeware package called ncpfs (by Volker Lendeke) which allows some access to some Netware servers. I've never used ncpfs but I have seen it used (a couple of years ago). It works a bit like NFS --- a directory you mount is visible to the whole system. Obviously that's not a problem for your laptop. By contrast the version of Caldera's client that I used back then provided access to NDS and bindery servers, and provided user dependent access. In other words, two users concurrently logged into your system would have different access to server files based on their individual access rights in Netware. (Under ncpfs any Linux user with any access to the mounted Netware file tree will get the same access as the Netware user who mounted it). If your Netware servers are using NDS and aren't providing bindery emulation --- or if you needs services that are provided via bindery emulation --- then you'll have to look at the Caldera client. Otherwise the ncpfs package may do the trick for you. ____________________________________________________ (?) Crypto Support for Linux From dreamwvr, August sometime in 1998 (in an old thread on the Linux-Admin List which I've been reading as part of the research for my book). i believe it is called efs which stands for encrypted file system... (!) Glynn Clements wrote: There is Matt Blaze's CFS (cryptogrphic filesystem) which is basically a userspace filesytem over NFS to the loopback interface. This was part of a larger package called ESM, encrypted session manager. That wasn't Linux specific, but does work under it. (?) Joseph Martin wrote: I am helping a friend set up a new computer system. He is particularly interested in security. The regular linux authentication at the console should work well enough, however I was wondering about even more security. Are there any encrypted file systems we could set up? For example the computer boots up, loads the system from a ext2 partition and then presents a login prompt. After login a mount command is given, a password supplied and the partition data made visible and acessable. After use of partition it is unmounted and rendered unusuable again. Anything like that exist? (!) You can use the loop device, which turns a file into a device which can then be mounted (assuming that it contains a valid filesystem). The loop device supports on-the-fly encryption/decryption using DES or IDEA (but you have to get the appropriate kernel source files separately; they aren't part of the standard kernel source due to legal nonsense). Alternatively, you can just encrypt the file with any encryption package (e.g. PGP), and decrypt it before mounting. However, this requires sufficient disk space to store two copies of the file. Glynn Clements (!) There is also the TCFS --- a transparent CFS from Italy. This is Linux specific code. (http://tcfs.dia.unisa.it) There was also supposed to be a userfs module for encryption --- but I don't know if that was ever completed to production quality. The best place to get most crypto code is to just fetch it from ftp://ftp.replay.com (or http://www.replay.com) which is located offshore (Netherlands?) to put it beyond the jurisdiction of my government's inane trade regulations. (Apologies to the free world). I thought I read on the kernel list that http://www.kerneli.org was supposed to be a site where international (non-U.S. exportable) patches would be gathered and made available. However that address only returns a lame one line piece of text to lynx. I fared better with their ftp site at: ftp://ftp.kerneli.org/pub/Linux/kerneli/v2.1 Where I saw a list of files of the form: patch-int-2.1.* (which I presume are "international" patches). Userspace toys can be found in: ftp://ftp.kerneli.org/pub/Linux/redhat-contrib/hacktic/i386 (RPM format, of course). Meanwhile the loopfs encryption module seems to be located at Linux Mama (canonical home of unofficial Linux kernel patches) http://www.linuxmama.com/dev-server.html which has a link to: ftp://fractal.mta.ca/pub/crypto/aem TCFS is also suitable for encrytion of files on an NFS server (only the encrypted blocks traverse your network --- the client system does the decryption. That's a big win for security and performance). As for encryption of other network protocols: There's the standard ssh, ssltelnet/sslftp (SSLeay), STEL, suite for applications layer work, and a couple of IPSec projects for Linux at the network/transport layer. A friend of mine has been deeply interested in the FreeS/WAN project at: http://www.xs4all.nl/~freeswan ... or at: http://www.flora.org/freeswan (a mirror) ... This consists of a kernel patch and some programs to manage the creation of keys etc. The idea of the FreeS/WAN project is to provide opportunistic host-to-host encryption at the TCP/IP layer. In other words my Linux router would automatically attempt to create a secure context (tunnel/route) when communicating with your IPSec enabled system or router. Similar projects are underway for FreeBSD, a few routers like Cisco, and even NT. Anyway I haven't tried it recently but I hear that it's almost ready for prime time. One of the big issues is that FreeS/WAN isn't designed for manual VPN use --- so it's command line utilities for testing this are pretty crude (or were, last time I tried them). On the other hand we still don't have wide deployment of Secure-DNS --- which is necessary before we can trust those DNS "KEY" RR's. So, for now, all FreeS/WAN and other S/WAN secure contexts involve some other (non-transparent) key management hackery. Hopefully someone will at least create a fairly simple front end script for those of us that want to "just put up a secure link" between ourselves and a remote office or "stategic business partner." Also FreeS/WAN has focused it's effort on the 2.0.x kernels. When 2.2 ships there will be another, non-trivial, effort required to adapt the KLIPS (kernel level IP security?) code to the new TCP/IP stack. The addition of LSF (linux socket facility --- a BPF-like interface) should make that easier --- but it still sounds like it will be a pain. There's apparently also an independent implementation of IPSec for Linux from University of Arizona (Mason Katz). http://www.cs.arizona.edu/xkernel/hpcc-blue/linux.html ... however this doesn't seem to offer any of the crypto code, even through some sort of hoops (like MIT's "prove-you're-a-U.S.-citizen/resident" stuff). I've copied Mason on this (Bcc) so he can comment if he chooses. I've also copied Kevin Fenzi and Dave Wreski in case they want to incorporate any of these links into their Linux Security HOWTO. http://sunsite.unc.edu/LDP/HOWTO/mini/VPN.html http://sunsite.unc.edu/LDP/HOWTO/Security-HOWTO.html An alternative to FreeS/WAN for now is to use VPS http://www.strongcrypto.com with 'ssh' This basically creates a pppd "tunnel" over a specially conditioned ssh connection. You have to get your copy of 'ssh' from some other site, for the usual reasons. Yet another alternative to these is CIPE (cryptographic IP encapsulation?) at: http://sites.inka.de/sites/bigred/devel/cipe.html ... which used encrypted UDP as the main transport. Of course we shouldn't forget our venerable old three head dog of mythic fame: Kerberos. This old dog is voted most likely to be our future authentication and encryption infrastructure (if for no other reason than the fact that Microsoft has vowed to "embrace and extent" --- e.g. "engulf and extinguish" it with Windows [DEL: NT v5.0 :DEL] 2000). The canonical web page for MIT Kerberos seems to be at: http://web.mit.edu/kerberos/www ... some news on that front is that Kermit version 6.1 is slated to include support for Kerberos authentication and encryption. More on that is on their web site: http://www.columbia.edu/kermit/ck61.html ... on the international front I hope to see the Heimdal project (from Sweden) reach production quality very soon. http://www.pdc.kth.se/heimdal When I talked to a couple of the developers of Heimdal I asked some hard questions about things like support SOCKS proxy (by their Kerberized clients), and support for one-time-passwords, support for NIS/NIS+ (nameservices lookups), etc. They seemed to have all the right answers on all counts. All that and it's free. Another European effort that is not nearly as attractive to us "free software fanatics" is the SESAME project (Secure European System for Applications in a Multi-vendor Environment) http://www.esat.kuleuven.ac.be/cosic/sesame The SESAME license only allows for free "experimental" use --- no free distribution, no installation for customers, and no "production use." Worse than all that no indication is made as to how much licensing would cost (say for individual use by a consultant). It appears to be geared towards limited distribution to "big" clients (the owners seem to be Bull SA, of France). However, they have some interesting ideas and their web pages are well worth reading. The suite of libraries seems to offer some worthwhile extensions over Kerberos. Some other pointers to cryptographic software are at Tatu Ylonen's (author of ssh) pages: http://www.cs.hut.fi/crypto/software.html (I've also copied Arpad Magosanyi, author of the VPN mini-HOWTO, in the hopes that he can find the time to integrate some of these notes into his HOWTO --- perhaps just as a list of references to other packages near the end). Of course the main thrust of Linux security has nothing to do with cryptography. An over-riding concern is that any privileged process might be subverted to take over the whole system. Bugs in imapd, in.popd, mountd, etc. continue to plague Linux admins. If security is really your friend's top interest and concern, and he's planning on running a general purpose Unix system with a mixture of common daemons (network services) and applications on it. I'd really have to recommend OpenBSD http://www.openbsd.org. That is considered by many to be the most secure "out of the box" version of Unix available to the general market today. (In the realm of commercial Unix, I've heard good things about BSDI/OS (http://www.bsdi.com). That is not to say that Linux is hopeless. Alan Cox has been co-ordinating a major Linux Security Audit project at http://www.eds.org/audit or: http://lwn.net/980806/a/secfaq.html There's also a set of "Secure Linux kernel patches" by Solar Designer (I don't know his conventional name --- everyone on the lists refers to him by this handle). http://www.false.com/security/linux/index.html These are a set of patches that prevent a couple of the most common sorts of exploits (buffer overflows and symlinks in /tmp and other world-writable directories). However, these patches are for 2.0.x kernels. They've been firmly rejected by Linus for inclusion into future kernels in favor of a more flexible and general (and more complicated) approach. Linux version 2.2 will support a "capabilities lists" (privileges) feature. This splits the SUID 'root' mechanism into a few dozen separate privileged operations. By default the system maps 'root' and 'SUID root' to setting all of these privileges as "enabled" and "inheritable." A sysctl() call allows a program to blank some or all of these bits, preventing it and (if one is clearing the "inheritable" bits) all of its descendants (all the processes it creates) from exercising these operations. This should allow us to emulate the BSD securelevel if we want to (create a little userspace utility that clears the appropriate "inheritable" bits and then exec()'s 'init' --- now all processes are unable to perform these operations). It's also nice in that it's more flexible than the BSD 'securelevel' feature. For example you could just strip the privilege bits from 'inetd' and your various networking daemons. This would mean that the attacker would have to trick some console/serial line controlled process into executing any exploit code. The eventual plan is to add support for the additional bits in the filesystem. That won't happen for 2.2 --- but will likely be one of the planned project for 2.3. These filesystem attributes would be like a whole vector of SUID like bits --- each enabling one privilege. So each program that you'd currently make SUID 'root' would get a (hopefully) small subset of the privileges. If that sounds complicated and big --- then you understand. This is essentially what the MLS/CMW "B2-level" secure versions of commercial Unix do. (As described in the TCSEC "orange book" from what I hear). As a stopgap measure I hope that someone writes a wrapper utility that allows me (as an admin) to "manually" start programs with a limited set of privileges. This would allow me to write scripts, started as 'root' that would strip all unnecessary privs, and exec some other program (such as 'dump' or 'sendmail' or 'imapd' etc). (Such a wrapper would also allow a developer or distribution maintainer to easily test what privs a particular package really needed to work). So, that's an overview of the Linux crypto and security. There are just too many web resources on this subject to list them all, and there is obviously plenty of work being done on this all the time. The major constraint on any new security work is the need to support Unix and all the existing and portable Unix/Linux packages. ____________________________ (?) Crypto Support ... What Book? From Dave Wreski on Mon, 09 Nov 1998 (From an old thread on the Linux-Admin List which I've been reading as part of the research for my book). Hey Jim. I was just wondering what kind of book you are writing? Is this a linux-specific security book? Dave (!) Linux Systems Administration (for Macmillan Computer Publishing http://www.mcp.com). Since I consider security to permeate all aspects of systems administration, there will be quite a bit of that interwined with my discussions of requirements analysis, recovery and capacity planning, maintenance and automation etc. ____________________________ (?) FS Security using Linux From AZ75 on Tue, 10 Nov 1998 Hello, My name is Jim Xxxxxx and I am a US citizen. I would like have a copy of the crypto code sent to me for testing if that's posible. I am at: .... (!) I think you misunderstand part of this thread. I wrote an article (posted to the Linux-admin mailing list and copied to my editors at the Linux Gazette, and to a couple of involved parties and HOWTO authors). In that article I referred to the work of Mason Katz. Mason wrote one of the two implementation of IPSec for Linux. Please go to http://www.cs.arizona.edu/xkernel/hpcc-blue/linux.html ... and take particular note of this: You may request the export controlled sections by sending email to mjk@cs.arizona.edu ... at the bottom. Also, if you read the notes more thoroughly, you'll find a comment that: Although we are not currently tracking the IPSEC architecture, we believe that the released version can be brought up to date and extended to allow for more services. ... which means that this implementation is probably out of sync with recent revisions to IPSec. That means that coding work would have to be done to make it interoperable with other implementations. I think you'd be far better off with the Linux FreeS/WAN implementation. In that case you'll be importing the code from the Netherlands. The stated goal of the Linux FreeS/WAN project is to provide a fully interoperable, standard implementation of IPSec. I still don't know what they're going to do about key management and Secure-DNS. I can't pretend to have sorted out the morass of competing key management specifications: Photuris, ISAKMP/Oakley, SKIP, IKE, etc. The Pluto utility with FreeS/WAN implements some sort of IKE with ISAKMP for part of the job (router-to-router mutual authentication?). The OpenBSD IPSec uses Photuris --- and I don't know of a Linux port of that. Presumably an interested party in some free country could port the OpenBSD Photuris to use the same interfaces to FreeS/WAN's KLIPS (kernel level IP security) as Pluto. My guess is that the two key management protocols could work concurrently (your FreeS/WAN host could concievably establish SA -- security associations -- with IKE hosts through Pluto and with Photuris hosts) although I don't know how each end would know which key management protocol to use. I came across one reference to an alleged free implementation of Sun's SKIP for Linux in an online back issue of UnixReview Magazine (now called Performance Computing). That made a passing references with no URL. Further Yahoo! searches dug up Robert Muchsel's: http://www.tik.ee.ethz.ch/~skip ... which leads to a frames site (Yuck!). However, the recent versions of Lynx can get one past that to more useful page at: http://www.tik.ee.ethz.ch/~skip/UsersGuide.html I also guess that FreeBSD offers a SKIP enabled IPSec/IPv6 implementation out of Japan through the KAME project at: http://www.kame.net Anyway, for now it appears that most of the key management will have to be done by hand (using shared secrets which are exchanged using PGP, GNU Privacy Guard, or over 'ssh' or 'psst' (GPG is the GNU re-implementation of PGP http://www.d.shuttle.de/isil/gnupg which is moving along nicely, and psst is the very beginnings of an independent GNU implementation of the ssh protocol IETF draft specification at: http://www.net.lut.ac.uk/psst). So, Jim, there's plenty of crypto code freely available --- you just have to import it from various countries with greater degrees of "free speech" than our government currently recognizes here in the U.S. (as is my custom I've removed identifying personal info from your message --- since this is being copied to my editors at LG). ____________________________________________________ (?) relaying still not correct ... From joel williams on Thu, 12 Nov 1998 Dennis, I have another computer on my 10.1.1.0 net. I rebooted my Linux box, and now it will not relay mail again. Any clues? Joel (!) Somehow it considers the Windows box to be "in" your domain --- while it considers the other 10* system to be offering it mail from "outside" of your domain. Could you take a piece of mail like this: -------------------- Cut Here ---------------- To: jimd@mail.starshine.org Subject: Testing Testing -------------------- Cut Here ---------------- ... and pipe that into the command: sendmail -v -t -oi &> /tmp/test.results ... (or capture the output in a typescript or use cut&paste from your telnet/xterm window). I'm interested in where this (other) system is trying to relay the mail to, and what/who it is masquerading as. The following might work: divert(0)dnl VERSIONID(`Williams-consulting nullclient') OSTYPE(`linux') FEATURE(allmasquerade) FEATURE(always_add_domain) FEATURE(masquerade_envelope) MASQUERADE_AS(`williams-consulting.com') FEATURE(nullclient, `williams-consulting.com') ... put that unto the affected box (if it's Unix), build the cf file (using a command similar to the one we used on the Linux box --- finding the right directory is the trick. You could use the copy of sendmail on the Linux box to build the .cf files for the other system(s) --- just redirect the m4 output to another file and copy the file over using ftp/rcp (or whatever). ... Note: Change the OSTYPE argument as appropriate. If this is a Windows box running Netscape Communicator or something like that -- check your "Identity" on that system. We know that you system will currenly relay for anyone that "claims" to be sending mail "from" your domain. So any client that masquerades as williams-consulting.com should work. I'll get an answer about the appropriate format for the /etc/mail/{relay_allow} file tonight. I'm pretty sure I have examples from Glynn Clements' posting to linux-admin in my archives. ____________________________________________________ (?) The state of UNIX in 1998 From Jay Gerard on 17 Nov 1998 I am a sometime writer and CBT (Computer Based Training) developer. In 1994 I wrote a CBT course, "UNIX for DOS Users." Time to upgrade the course and remove the DOS comparisons. What I am not is a UNIX expert. To gather enough experience/knowledge to write the original course I installed Coherent -- a UNIX clone -- on a PC, bought some books and asked a lot of questions. What I would like to do now -- through this newsgroup -- is to ask some questions. I'm hoping that some people here will be willing to answer -- either through the group or via personal email to me. So, here are some questions. 1) In 1994, the Bourne shell was the most widely used. Is this still true? Are some shells more suitable for particular applications? For particular environments? (E.g. - - do universities tend to favor one shell?) (!) The Bourne family of shells is still somewhat more common than csh and tcsh. On Linux the most popular shell, and the one used by default is bash (a Bourne/Korn clone from the FSF). (?) 2) Does Linux offer a variety of shells? Does it use a proprietary shell? (BTW, is it pronounced "LIE-nux" or "LINN-ux" or ???) (!) Yes. Every shell that is commonly available for other forms of Unix are available for Linux. Here's a small list: ash, bash, pdksh, ksh88, ksh9x, tcsh, zsh (?) 3) What uses are there for UNIX on a personal (stand-alone) box? (!) There are a number of games and applications that are available for Unix. In particular we find that Linux is spurring development of free and commercial productivity and personal apps. For example KDE and GNOME have numerous games and small apps. While KDE and GNOME are also portable to other forms of Unix, and much of the development was done on FreeBSD and other platforms --- they are strongly associated with Linux. (Fairly or not is a flamewar all its own). WordPerfect has been available for Linux for a few years --- and Corel has released new versions very recently. In addition Corel is committed to releasing their entire office suite for Linux. Hopefully this will run under the FreeBSD/Linux compatability libraries as well. There are more different applications suites available for Unix/Linux than there are for Windows (since MS has squeezed out almost all of the competition in that market). So we have our choice among StarOffice, Applixware, SIAG (free, "Scheme in a Grid"), LyX (free, LaTeX GUI/front end), and others. For more info on personal Linux applications I have three favorite URLs: Linas Vepstas' Home Page: http://linas.org/linux (note: this is NOT Linus Torvalds, the father of Linux --- he is another notable Linas) Christopher B. Browne: http://www.hex.net/~cbbrowne/linux.html Bill Latura's: Linux Applications and Utilities Page (v.11/12) http://www.xnet.com/~blatura/linapps.shtml I've been pointing people to these pages for some time --- sometimes I've referred to them from my monthly column in the Linux Gazette (as "the Answer Guy" --- a nomination that I didn't choose --- though I did volunteer to answer the questions). You can read the Linux Gazette (a free online webazine) at: http://www.linuxgazette.com. There are several other Linux webazines and periodicals including: Linux Weekly News: http://www.lwn.net Linux Focus: http://www.linuxfocus.org ext2: http://www.ext2.org (ext2 is the dominant Linux native filesystem reputed by some to be the fastest filesystem ever implemented on a PC --- which would sound like brash posturing if I'd heard those claims from Linux users --- those were from *non-Linux* analysts). Slashdot: http://www.slashdot.org (not strictly "Linux" but heavily oriented towards Linux and open source Unix systems). Freshmeat: http://www.freshmeat.net (not really a publication --- more of a daily announcements board for new Linux software and upgrades). Linux Today: http://www.linuxtoday.com ... and it's sister publication: Linux World: http://www.linuxworld.com These last two are relative newcomers --- the brainchildren of Nicholas Petreley --- and they seem to be funded by IDG Publications. (?) 4) Are all GUI applications based on X-Windows? (!) Not in Linux. There are SVGAlib programs and there are at least two (relatively obscure) alternative GUI's (?) 5) Can you point me to a (hopefully concise) source of info with respect to GUI integration in UNIX today? I'd prefer an Internet-based source; but a book is OK, too. (!) The most active avenues of Linux/FreeBSD GUI development these days are: http://www.kde.org http://www.gnome.org http://www.gnustep.org (?) 6) Are "Open Look" and "Motif" still common? In widespread use? (!) OpenLook essentially died. You can still find and use the toolkits and window manager but it was the loser in the first great Unix GUI war. Motif is nominally still the "standard" for commercial Unix --- however, the GTK (GNU toolkit and widget set) is starting to take over the freenix flavors. GTK is the underlying library set for the GIMP (a popular freenix image manipulation and graphics package), and for GNOME (the GNU Network Object Model Environment project --- which is in early stages of development and will provide Unix users with a full suite of CORBA/GTK applications and utilities for their desktop environments). In commercial world CDE (built over Motif) is supposed to be the standard. However most of the serious Unix users I know basically work around CDE rather than with or in it. In the freenix community, KDE is out and available --- and subject to some controversy (since it currently relies upon a set of libraries that's only partially "free" --- a bit of hairsplitting that concerns programmers ISV's and distribution integrators and vendors). KDE and CDE aren't really comparable. They serve different purposes. However, superficially they offer similar appearance (although these days most GUI's look alike anyway). (?) 7) What per cent of UNIX users/installations use a GUI? (!) I have not idea. I gather that about 70% or more of the Linux user base primarily uses their GUI's One glitch in any such statistic would be the ratio of "server" machines to workstations. Very few organizations use character cell terminals these days --- many use Windows systems as ethernet terminal emulators to talk to their Unix systems and mainframes. There is a chance that the Netwinders and similar (Linux/Java based) NC's will see significant deployment in banks, retail sites (like automotive parts and pizza counters, etc). This is due to their low cost, extremely small footprint, low energy consumption and heat dissipation, quiet operation and practically non-existent maintenance requirements. (?) 8) Are there installations which use both a GUI and the standard character-based interface? (!) Yes. I use them at my office. (?) 9) What is your opinion as to the usefulness/practicality of a GUI in UNIX now. In the future? (!) Who cares? Why so much focus on the GUI's? I personally use text mode for most work. I mostly work in my text editor (which is also my mail and newsreader). I usually use Lynx to browse the web, because I'm usually interested in the content -- the text. I usually keep one or two X sessions running on each of my systems (one running as me, another running under my wife's account). I switch out of them to do most of my work, and into them to use Netscape Navigator, xdvi and/or gv (TeX/DVI and PostScript previewers), and 'xfig' (a simple drawing program) when I need those. I use 'screen' (a terminal multiplexer utility) which allows me to detach my work from one terminal/virtual console and re-attach to it from any other. This lets me yank my editor/mail/news session into an 'xterm' or yank it from there and unto my laptop/terminal in the living room (it's a home office). That's how I watch CNN and TV when I want to. One of the reasons I adopted Linux is because I prefer text mode screens and keyboard driven programs to GUI's. It lets me work my way --- rather than trying to make me work "its" way. In answer to your question: You really need to do some research at the sites that I've listed. Linux and freenix is poised to completely wipe Microsoft from the desktops of the world in the next few years. The fact that every major magazine in the industry has been recently saying "Linux can't take over the desktop" is lending initial credibility to the idea. It was an absurd idea a year ago. But all the work on KDE, GNOME, GNUStep, the growing support by Caldera, Applix, Star Division, and the hints of interest by Compaq, Intel, and others clearly point to a Linux future on the desktop. (In this regard I must point out that FreeBSD is every bit as viable technically --- and that it will certainly gain a sliver of that marketshare as well, probably not nearly as much as it deserves --- Linux has more "mindshare"). CNN had a three minute segment on Linux running every hour all weekend. See my report on Linux Today at: http://www.linuxtoday.com/stories/867.html ... for details. The problems with Unix were typically in the bickering and licensing between the major vendors (most of them hardware manufacturers whose primary interest was in "trapping" a segment of the market). Technically it has always been a pretty good choice. Another problem with Unix over a decade ago was the lack of power in the early micros. You could not support a credible Unix on anything less powerful than a 386 with about 16Mb of RAM and about 300Mb of disk space. Once you get past that threshold (about 1990 was when these systems saw significant consumer deployment) you saw reasonably rapid development of Linux and FreeBSD. (Linux was publicly available in late '91 to early '92 --- I've been using it since late '92 to early '93. 386BSD, by Mr. and Mrs. Jolitz was further along in development by that point --- and FreeBSD appeared around that time). In any event, the usefulness of the various GUI's under Unix are equal to those for any other platform. The only thing that isn't "all there" is the ability to readily share documents with MS Office applications. Anyone who thinks that this is not do to a deliberate effort on the part of Microsoft is delusional. MS executives and developers would have to be IDIOTS not to see the strategic importance of "one-way" document interoperability --- of the value of "locking in" their customers to "cross sell" their OS products. They would be remiss in their fiscal responsibilities if they'd failed to use that to the advantage of their shareholders. (Note: number one dilemma of corporate capitalism --- shareholders have priority over customers, number two is the inevitability of over-capacity and number three is the necessity for anti-trust regulation and government to moderate monopolies and cartels. Sorry, but over capacity and monopoly are systemic in our economy --- the rules predispose the trend towards them, eventually and inevitably). (?) 10) From the "probably-off-the-wall department": Is there a site where I can telnet in to actually practice using UNIX? (!) If you have a PC (or a Mac), use Linux. Then install FreeBSD (or NetBSD for your Mac). There is no reason (excuse) to try to write a tutorial on Unix without getting some hands on experience. In answer to your question, there are numerous "freenet" and "pain" (Public access internet nodes) sites around. They tend not to advertise for obvious reasons. (?) Thanks for any help. Jay Gerard (!) Good luck on your project. ____________________________________________________ (?) How Many Ways Can I Boot Thee: Let Me Count Them From Wilke Havinga on Tue, 17 Nov 1998 (from the L.U.S.T List) >I understand that Linux cannot be on the slave drive. (!) You misunderstand. Linux can be installed on most combinations of devices. You can have the kernel on any drive where your loader can find it (for LILO that means anywhere that your BIOS can access, for LOADLIN.EXE --- a DOS program that means anywhere that DOS can access). You could put your kernel completely outside of any filesystem, laying it out at some arbitrary location on some hard disk. So long as you can get your loader code to find it --- you can load that kernel. (You could use the /sbin/lilo utility to prepare this particular set of LILO boot blocks and maps --- since it needs to find the kernel image and it's a linux program. However you could hand craft your own maps if you were really determined to have a kernel laying on the unused portion of track zero or on some part of your disk that was between or after the defined partitions). Once the kernel is loaded it looks for a root filesystem. For any given kernel there is a compiled-in default. This can be modified using the 'rdev' command (which performs a binary patch of the kernel image). It can also be overridden by supplying the kernel with a command line parameter (root=). There are a number of kernel command line parameters (all of the form: option=value) --- these can be passed to it via the LILO "prompt" or the /etc/lilo.conf append= directive, or on the LOADLIN command line (among others). Read the BootParam HOWTO and man page (section 7 of the man pages) for details about kernel parameters. You can boot a kernel directly from a floppy (just dd the kernel image to the raw floppy). You can also use LILO on a floppy. You can create a bootable DOS floppy with a copy of LOADLIN and a linux kernel on it (with an AUTOEXEC.BAT if you like). You can even use the SYSLINUX package (available as DOS and linux binaries). This modifies a (non-bootable) DOS formatted floppy to boot a Linux kernel (and is used by the Linux Router Project and Red Hat boot diskettes). It is also possible to boot Linux from some sorts of FlashROM and ROMdisk emulators and from other forms of ROM installation. You can even boot Linux across a network using a boot prom for those ethernet cards that support them (for example). Igel makes PC hardware with embedded versions of Linux for their line of X terminals, thin clients and "Ethermulation"/"Etherterminals" (thse boot from flash). http://www.igelusa.com. Also there are many discussions of alternative boot methods and devices that are regularly discussed on the "Embedded Linux" mailing list at 'http://www.waste.org/mail/?list=linux-embedded' (?) >Hmm... That's odd, because I have Linux on a slave HD right here on this >computer and it works fine. I'm certain it doesn't have trouble getting >at drives on the secondary controller, either. Booting with LILO? Or Loadlin? [prior partition dicussion snipped] Don't forget, Linux needs a swap partition. This is not entirely true, if you have enough RAM (like, >64MB will be enough for most people) you don't need one. It's only that RedHat requires you to have one (which I find pretty annoying sometimes because you can have only 4 partitions on a drive, especially on large drives). (!) While technically you are correct, you don't need a swap partition, this is bad advice. You'll find that you performance suffers dramatically without one. Although I make a couple of 64M swap partitions available on my system (allowing Linux to load balance across a couple of spindles if it should ever need to), it typically used about 30K of swap even when I have plenty of RAM free (most of it is used in file/cache buffering). Read the kernel list archives and search for the term "swap" and you'll find that the consensus among the kernel developers is that you need swap to get decent performance out of the current kernels. Some have even reported that using 100 or 200K RAM disk with a swap file on it will dramatically improve the performance over using all of your memory as straight RAM. So, Red Hat's insistence may be irritating --- but it is not wholly without cause. You are wrong about the number of permitted partitions per drive. You can have four primary partition entries. One of those can be an "extended" partition. That extended partition can have "lots" of partitions. Let's look at an example from 'antares', my decade old 386DX33 with 32Mb of RAM and a full SCSI chain: Disk /dev/hda: 16 heads, 38 sectors, 683 cylinders Units = cylinders of 608 * 512 bytes Device Boot Begin Start End Blocks Id System /dev/hda1 * 1 1 107 32509 4 DOS 16-bit <32M /dev/hda2 108 108 684 175408 a5 BSD/386 .... and old FreeBSD partition that I haven't used in a couple of years. This is the boot drive. I use LOADLIN to get into Linux. Disk /dev/sda: 64 heads, 32 sectors, 1908 cylinders Units = cylinders of 2048 * 512 bytes Device Boot Begin Start End Blocks Id System /dev/sda1 * 1 1 32 32098+ 83 Linux native /dev/sda2 5 32 102 72292+ 82 Linux swap /dev/sda3 14 102 1907 1847475 5 Extended /dev/sda5 14 103 236 136521 83 Linux native /dev/sda6 31 236 495 265041 83 Linux native /dev/sda7 64 495 1248 771088+ 83 Linux native /dev/sda8 1184 1248 1907 674698+ 83 Linux native Whoa nelly! I have 3 primary partitions: 1 2 3 --- the third defined the entended partition. Therein I have 5, 6, 7, and 8 --- another four partition on that same drive. I think I've gone upto 10 at least once --- though I don't know of a limit to these extensions. Disk /dev/sdb: 64 heads, 32 sectors, 532 cylinders Units = cylinders of 2048 * 512 bytes Device Boot Begin Start End Blocks Id System /dev/sdb1 1 1 17 17392 83 Linux native /dev/sdb2 18 18 532 527360 5 Extended /dev/sdb5 18 18 532 527344 83 Linux native Lookie! A disk with two primaries, one defining an extended partition that contains a single Linux fs. Disk /dev/sdc: 64 heads, 32 sectors, 2063 cylinders Units = cylinders of 2048 * 512 bytes Device Boot Begin Start End Blocks Id System /dev/sdc1 1 1 2063 2112496 83 Linux native ... Oh. One that just has one partition on it. (The rest of this SCSI chain consists of a CD, a CDR, a 4mm DAT autochanger tape drive, and an old magneto optical drive). (?) So if you intend to run RedHat (which is probably the easiest to install) you need 2 partitions for Linux indeed. (!) Yes. However, you can just put these in extended partitions (one primary partition is labeled as "the 'extended' partition" --- then all partitions defined within that are called "extended partitions" --- an irritating bit of terminology that serves to confuse). (?) Wilke Havinga (!) I hope that helps. ____________________________________________________ (?) Programmer Fights with Subnets From Grant Murphy on Tue, 17 Nov 1998 I'm a numerical C programmer and have inherited the system admin job in a 'small' geophysical exploration company. We have a fine collection of lovingly maintained and oftem overhauled equipment ranging from SunOs4 machines to an NT box, handbuilt aquisition systems mounted in aircraft, dual real time differential GPS systems etc. etc. I know A LOT about a number of particular things in maths, geophysics, unix, world coord systems etc, but I am a babe in the woods about other things ... networking in particular. The problem at hand ( & one that I have searched for FAQ's on & trolled comp.os.linux.networking for the REAL answer to ) is this: We have two networks in our office, one is made up entirely of windows 95 machines and office printers etc. The other was made up entirely of SunOS4 and Solaris machines with an A0 HP map plotter and a versatec plotter ( about the size and weight of a compacted VW bug ). The two networks intersect in a single linux box running a 1997 version of caldera linux, with two network cards, a dial out modem card for internet access, no keyboard, no moniter ( well, who needs them ) The SunOS network now contains two windows machines used for processing data. One is Win95, the other WinNT workstation. I **can't** get the two windows machines to see the shared drives and printers of the win95 machines on the other side of the linux box. 1) I have all win machines using TCP/IP with NetBeui disabled (lots of people seemed to recomend this) (!) That's because NetBIOS/NetBEUI (the "native" Windows transport level networking protocols) aren't routable --- they only work within a LAN). (?) 2) I have samba on the linux box and can mount unix drives and see them on the network neighbourhood of the win95 box & winNT box on the unix network. (!) What version of Samba is it? Have all the appropriate patches and service packs been applied to the Win '95 and NT boxes? That problem probably related to the share "browse mastering" protocols used by SMB. There have been many problems with these browsing protocols. I don't know the details, but I've heard that the Samba team has done quite a bit of work to fix those problems. (?) 3) The network was split into two rings before I arrived under the rationale that the traffic of the two networks wouldn't interfere (some of the geophysical data traffic is pretty big - half gigabyte files etc) (!) Isolating LAN segments is a classic and effective way to optimize bandwidth utilization. I shudder t think of the amount of money that's been unecessarily and poorly spent on etherswitches for networks that would have benefitted far more from simple segmentation and (in some cases) some server file tree replication. (?) 4) The linux box has two cards: eth0 with IP address 192.9.200.10 and broadcasting 192.9.200.* - all unix boxes, win machines attached through that card have IP addresses 192.9.200.* eth1 with IP address 192.168.1.10 and broadcasting 192.168.1.* - all office machines have adresses 192.168.1.* 5) I can ftp from the office network to the unix boxes alright . (!) So, TCP routing works between the two. (?) I'm under a reasonable amount of pressure to make the network look easy, people want to access the HP A0 plotter from the office computers just like they access the office laser printer - Now that the processing guys have an NT box with word processing etc. they want to access the office laser printer. (!) If the primary resource that is to be shared is the printer --- I'd connect the printer to the Linux box, and install Samba. Let it be the print server as well as the router between the two segments. Likewise for the plotter (if that can be driven by your Linux system. I'm not familiar with the device or its interfaces). (?) Owing to industry recession, the chances of getting an expert network guy in to solve it seem to be slim to bugger all. This is chewing up time that is better spent working on algorithms to do noise reduction of 256 dimensioned radiometric data, and improving field QC software. If you have any answers to this conundrum they would be gratefully received & I am happy to return the favour with answer's to any posers that you might have about numeric/scientific/geophysical/C language problems. (!) Try installing the latest version of Samba on the Linux box (try the 2.0. beta that was announced last week). Hopefully it will be able to propagate those pesky browse/share broadcasts from each segment to the other. (?) (I wrote an ANSI C compiler for an early version of MINUX that was ported to both a transputer array and an ARM6 chipset machine - none of that involved networking though) (!) Is there any Linux support for transputers? Are there modern transputers (PCI, even), or have modern processors obviated their utility? (?) Yours sincerely (& perplexed) Grant Murphy ____________________________________________________ (?) Using A Dynamically Assigned Address from PPP Startup Script From D. Kim Croft on Tue, 17 Nov 1998 I am trying to set up a script that, when I connect to the internet will write a little html file with a link to my ipaddress to upload to my web account on my isp. However my ip address is dynammically assigned so I never know exactly what it is. In windows I can netstat -rn to find it but,in linux when I netstat -rn i only get my ?router?. Anyways If you know of any way that I can find my ipaddress when I connect. it would be greatly apprecciated. (!) Let's assume that you are using the Linux pppd package to establish this connection. In that case the most obvious method would be to call your script from the '/etc/ppp/ip-up' script. Reading the 'pppd' man page we find a couple of references to this file, which is automagically called when the PPP session is established. ('/etc/ppp/ip-down' is called when the session is terminated). It's called with five parameters including: interface device speed your-IP their-IP .. and there's an option to provide an additional, admin specified parameter which can be set from your options file. So you can write your script to just take the parameters you need (just the local IP address in this case) can call it with an entry in your ip-up script with a command like: /usr/local/bin/update-my-web-page $4 ... where 'update-my-web-page' is a shell, perl, awk, Python, TCL, or other script or program that opens a connection to your website's host and writes your page to it. (I'll assume that you have 'rcp/rsh', ksh (Kerberos 'rsh') 'ssh/scp' or C-kermit or 'expect/ftp' connect and tranfer script that can automate the file propagation process. (?) thankyou ____________________________________________________ (?) More than 8 loopfs Mounts? From Philippe Thibault on Fri, 20 Nov 1998 I've setup an image easily enough and mounted it with the iso9660 file system and asigned it to one of my loop devices. It works fine. What I was wondering was, can I add more than the eight loops devices in my dev directory and how so. What I'm trying to do is share these CD images through SMB services to a group of Win 95 machines. Is what I'm trying to do feasable or possible. (!) Good question. You probably need to patch the kernel in addition to making the additional block device nodes. So my first stab is, look in: /usr/src/linux/drivers/block/loop.c There I find a #define around line 50 that looks like: #define MAX_LOOP 8 .... (lucky guess, with filename completion to help). So, the obvious first experiment is to bump that up, recompile, make some additional loop* nodes under the /dev/ directory and try to use them. To make the additional nodes just use: for i in 8 9 10 11 12 13 14 15; do mknod /dev/loop$i b 7 $i; done I don't know if there are any interdependencies between the MAX_LOOP limit and any other kernel structures or variables. However, it's fairly unlikely (Ted T'so, the author of 'loop.c' hopefully would have commented on such a thing). It's easier to do the experiment than to fuss over the possibility. In any event I doubt you'd want to push that value much beyond 16 or 32 (I don't know what the 'mount' maximums are --- and I don't feel like digging those up do). However, doing a test with that set to 60 or 100 is still a pretty low-risk and inexpensive affair (on a non-production server, or over a weekend when you're sure you have a good backup and plenty of time). So, try that and let us know how it goes. (Ain't open source (tm) great!) Of course you might find that a couple of SCSI controllers and about 15 or 30 SCSI CD-ROM drives (mostly in external SCSI cases) could be built for about what you'd be spending in the 16 Gig of diskspace that you're devoting to this. (Especially if you can find a cachet of old 2X CD drives for sale somewhere). ____________________________________________________ (?) Where to find Multi-Router Traffic Grabber From Brian Schau on Sun, 22 Nov 1998 Hello Jim, You might have a point. I haven't even considered mrtg myself. Do you have a URL to mrtg? Kind regards, Brian (!) Freshmeat (http://www.freshmeat.net) is you friend. Its quickfinder rapidly leads me to: Multi-Router Traffic Grabber Home Page: http://ee-staff.ethz.ch/~oetiker ... the canonical home page for MRTG. ____________________________________________________ (?) Support for the Microtek SlimScan Parallel Port Scanner From Alejandro Aguilar Sierra on Sun, 22 Nov 1998 Hello, The scanner SlimScan from Mocrotek uses a kind of scsi through parallel port connexion. Neither 2.0.x nor 2.1.x kernels seems to have support for this device, at least I didn't find it in the kernel config in parallel and scsi sections. There are drivers for parallel port ide and atapi devices but not for pseudo scsi. Am I wrong (I hope) ? Any suggestion? (!) You're probably not wrong. There probably isn't support for this, yet. Suggestion: Call Microtek. Ask if they have a drive. Then ask if they know of a driver some someone else? Then ask if they'd be willing to write a driver (point out there there are plenty of code examples for parallel port device drivers and from which they are legally entitles to derive their own driver --- subject to the GPL, of course). If you're still making no headway --- consider asking for an RMA (a return merchandise authorization: assuming that you've only recently purchased this scanner). Then go get one that's supported. When a company gets enough of these (customers who purchased a product in good faith and found that it doesn't suit their needs due to a lack of Linux support), they often come to their senses and realize that they are hardware companies (that providing source code drivers and technical specifications removes the biggest constraint to their ability to sell their products). (?) Thanks, Alejandro (!) You're welcome. Good Luck. ____________________________________________________ (?) RPM Dependencies: HOW? From Riccardo Donato on Sun, 22 Nov 1998 How can you install rpm packages that are written for redhat 4.0 or 5.0? I tried to install them but for some of them I receive error messages (libraries which are not into the system). (!) When asking questions in any public forum (mailing list, newsgroup, webazine or traditional magazine) if the question relates to any errors you are seeing .... INCLUDE THE TEXT OF THE ERROR MESSAGES! It's also a good idea to include the exact command line or sequence that gave the error. I can't tell if you were getting this from a shell prompt using the 'rpm' command or from some X Windows or curses front end to the RPM system. That said I suspect that the RPM system is complaining about dependencies. That is to say that the package you are trying to installed "depends" on another package (such as a library). The usual solution is to get get the RPM file which provides those libraries or other resources, and install them first. Sometimes it can be a bit of a trick to figure out which RPM's you need to install and in what order. It would be nice if Red Hat Inc. provided better information on that (perhaps in the "info" page that can be extracted fromm any RPM file using the 'rpm -qpi' command). There's some 'rpm --whatprovides' switch --- but I have no idea what that does. Another trick, if you have a hybrid system (with some RPM's and some packages you've built and installed from "tarballs" or even through the Debian package system) is to try the installation with the "--nodeps" option to the 'rpm' command. However, this may not work very well, even if you have the requisite packages installed. It shouldn't be a problem with libraries --- but some other types of files might not be located in the "right places." You can usually solve that with judicious use of symlinks; but you need to know what the RPM package's programs are looking for and where. Without knowing the specific packages involved, I couldn't do more than generalize. Considering that there's a whole web site devoted to the RPM system http://www.rpm.org and a couple of mid-sized corporations (Red Hat, http://www.redhat.com, and S.u.S.E. http://www.suse.de and http://www.suse.com) --- it would be silly for me to generalize on the RPM system. ____________________________________________________ (?) modutils question From M Carling on Sun, 22 Nov 1998 Jim, The docs for 2.1.129 indicate that modutils-2.1.121 are prerequisite. But the README for modutils-2.1.121 indicates that it must be compiled under a 2.1.X kernel. Do I have a chicken-and-egg situation here? M (!) Shouldn't be that bad. You should be able to build a kernel with enough support (compiled in) to access your root fs device. (You already do, unless you were doing something fancy like running an 'initrd' (initial RAM disk)). Also the claim that it needs to be compiled under a 2.1 kernel seems very odd. I could see where it would need the 2.1.x kernel installed (so that it could find the proper header files --- which are symlinked from /usr/include to somewhere under /usr/src/linux.... (/usr/src/linux in turn is normally a symlink to .../linux-X.Y.ZZZ). I can't see where the compiler (totally user space) needs to have any special kernel support to do its job. I think you could even cross compile the kernels and modutils --- so I think the README is wrong (or being misinterpreted). (Note: having the kernel "installed" is not quite the same as running under it. Maybe that's what they mean). (Again, I didn't have a problem with this -- but I often compile kernels without loadable module support and I routinely compile my SCSI and ether card drivers statically into my kernel. There's often nothing else I really need loaded.). ____________________________________________________ (?) libc5 and libc6 From M Carling on Sat, 21 Nov 1998 Hi Jim, I'm preparing to configure and compile 2.1.129. At the moment, I'm trying to bring up-to-date all the software on which it's dependant. The documentation ambiguously seems to suggest that one needs BOTH libc5 AND libc6. Is that right? Or is it either/or? M (!) The linux kernel is completely independent of your libc version. You can run a 1.2.x, 2.0.x and 2.1.x kernels with libc4, libc5 and glibc (libc6). You can switch among kernels mostly with impunity and you can have all of these libc's on the system concurrently. (The dlopen stuff will resolve the problems according to how each binary was linked). The few gotchyas in this: Really old kernels (1.2.x) used a different presentation of key nodes under /proc. Thus the procps utilities (like 'ps' and 'top') from that era would core dump when executed under a newer kernel (with an incompatible proc representation). I don't know if the newer procps suite will gracefully deal with the obsolete proc format or not. I should check that some time. The format of the utmp and wtmp files has changed between libc5 and glibc. This is completely unrelated to the kernel. However, it means that all utmp/wtmp using programs must be linked against or or the other library. Those won't co-exist gracefully. (I imagine you could isolated all your libc5/utmp/wtmp programs under a chroot or some silly thing --- but I doubt that's going to be useful in practice). There is a list of all of "Linux 2.1 Required Utility Program Upgrades" at LinuxHQ: http://www.linuxhq.com/pgmup21.html ... with convenient links to the tar.gz file for each of them. I have run 2.1.12x kernels without upgrading any of these and without any mishaps. I'd probably eliminate some of minor quirks and Ooops' that I've see --- and I'll get around to that when I get the time. ____________________________________________________ (?) Linux on Dell Systems From Mikhail Krichman on Fri, 20 Nov 1998 Dear Mr. Dennis, Sorry for bothering you out of the blue, but you seem to be THE person to talk to regarding the problems I have. (!) I wouldn't say I'm THE person. There are thousands of Linux users on the 'net that do the same sorts of support that I do. They just don't get all the glory of a monthly column in LG ;) . (?) I am thinking of buying a Dell computer system (350Mhz, Pentium II desktop). I intend to install Linux on it (to type my dissertation in LaTeX), but I also want to have Win98 and related software, just in case. IN relation to this I have two burning question: (!) Maybe I could ask you a few questions on LaTeX. I'm writing my book (Linux Systems Administration) in that format because I love the extensibility, the cross references and labels, the indexing, and the ability to focus on structural markup rather than appearance (and to defer many elements of cosmetics to later). However, it is a pretty complex environment (more programming than composition) and I occasionally get into some tight spots). I'd love to have a LaTeX guru on tap. (Yes, I sometimes post to the comp.text.tex newsgroup; but sometimes I prefer the bandwidth of voice to the precision of e-mail/news text). (?) 1) My friends warned me that Dell (just as any other brand name computer) may have some proprietary features of the design, which would prevent Linux from functioning properly. Have you had any related problems reported or dealt with? (!) Actually, Dell owes a tremendous degree of its popularity to the fact that they usually eschew proprietary features and traditionally have produced very compatible systems with consistent quality. They might not always the the "hottest, coolest, fastest, and latest" --- but a palette load of Dells will all work the same way, probably won't require any special vendor drivers and patches, and won't cost as much as the first tier IBM's and Compaq's (who can afford to devote that extra margin on research and development of cool, fast, late-breaking, bleeding edge and proprietary features). Many business have standardized on Dell for this reason. Some of these have palettes of these systems drop shipped to them (hundreds at a time in some cases). They want the systems they order next month to work just like the ones they deployed last month --- because having your IS and help desk staff trying to sort out those new "features" can rapidly cost more than the systems themselves. So, Dell traditionally was noted for it's lack of proprietary frills. However, they've now been the "wunderkind" of the stock market for about the last year. This may spur them to take on the very same "bad attitudes" that provided them with the opportunity to overtake IBM and Compaq in the marketplace. I should reveal some of my biases and involvement with this issue: I wrote an open letter to Dell(*) to lobby for customer choice in the bundled software. This was specifically to allow Linux and FreeBSD users to order systems without purchasing software that we don't want and will never use. (*) Published in the Linux Weekly New http://lwn.net/lwn/980514/dell.html They'd initially claimed that there was "no customer demand for this" (which was an offensive lie). It was later revealed that they had been pre-installing Linux on systems shipped to some select corporate customers in Europe (read: BIG contracts that DEMANDED it) for about a year. Micheal Dell has recently commented on the issue (though not in response to me, personally) and characterized the demand a "vocal" but not necessarily from a large market segment. I responded to that as well. (http://www.lwn.net/1998/1112/backpage.phtml). So, obviously I'm biased. More importantly I've pointed to alternatives. There are a large number of hardware vendors that will respond to their customer's needs. You can find a list of vendors who will pre-install Linux at: http://www.linux.org/vendors/systems.html Naturally these are small companies that "nobody" as ever heard of. However, Dell was also an obscure company as little as five or six years ago. So, there's a real chance that one of these vendors will become the next Dell. I think that Dell will soon "see the light." Although I've lobbied for it and think it would be best of the Linux community as a whole; I have mixed feelings from another tack. I'd really rather see one of the "little guys" (from the Linux vendors list for example) grow into a new powerhouse on Wall Street. (My superficial impression is that VA Research has the best current head start on this market. However, VA Research focuses entirely on PC's --- and so far refuses to consider Alpha, PowerPC, StrongARM, or other platforms that represent some interesting new options for the Linux user. There's a part of me that is getting REALLY tired of PC's. Linux gives of the choice --- all of the core software that most of use for most of our work is portable and has already been ported to almost a dozen architectures. WE DON'T HAVE TO TAKE IT ANY MORE!). (?) 2) I really would like to have a DVD-ROM on my machine (III generation, but I don't know which brand they are offering). Are there DVD-drivers supported by Linux, or, alternatively, will the CD-ROM drivers available with Linux make the DVD-ROM work at least as a CD-ROM? (!) Quite by chance I noticed that PenguinComputing (http://www.penguincomputing.com --- founded by my friend and fellow SVLUG member, Sam Ockman) now offers DVD Drives on his systems. (*) * (http://www.penguincomputing.com/dvd-cd.html) I note that there isn't currently any available software to view DVD movies under Linux. However, there's apparently no problem using these drives to read CD discs, including CD-R and CD-RW media. ... He also offers those cool case LCDProc displays there were all the rage at SlashDot (http://www.slashdot.org) earlier this year. These are little backlit LCD panels that you can install in place of a couple of 5.25" drive blankup covers in any normal PC case. You can drive this to provide various types of process status displays. Anyways, you might want to consider getting the whole system from him. (Editorial disclaimer: I did mention that he's a friend of mine, didn't I? I'm not, however involved in any business with Sam, nor with VA Research --- which is also operated by friends and aquaintances and where Sam used to work, in fact). (?) Sincerely, Mikhail KRichman (!) Hope this all Helped. ____________________________________________________ (?) Remote Login as 'root' From Crown Magnetics, Inc on Fri, 20 Nov 1998 How can I find out how to make it possible on A Linux system to login as root at a location other than the console? (I'm used to Solaris Intel and there it's in /etc/default/login) but I'm not sure how to do this in Linux . . . Thanks - Sheldon (!) Most UNIX systems refuse to allow remote users (telnet) to login directly as root. This is intended to require that you login under your normal account and 'su' to 'root' as necessary. Overall I think this is an excellent policy to enforce. Actually I think its still far too liberal. You really should consider installing 'ssh', STEL, or a similar secure and encrypted remote access system. If you really insist on being able to do this via 'telnet' or 'rlogin' then you'll have to look in your man pages for the 'telnetd', 'login' and 'in.rlogind' (or equivalent) programs. I'm not saying this to be churlish --- there are different suites of these utilities that are included with different distributions. Some distributions use the "Shadow Suite" (originally by J. Haugh III?). There is a file called '/etc/login.defs' (with a corresponding man page: login.defs(5)). That case a CONSOLE directive/option. Read about it. Red Hat includes the PAM suite of these utilities. It's possible to remove the 'securetty' check from the specific PAM service configuration files by editing the files under the /etc/pam.d/ directory (more recent versions) or the one /etc/pamd.conf file (obsolete). In some cases you may have to edit your /etc/inetd.conf file to add or remove options from the 'in.*' services listed therein. For example you have to add a -h to the in.rlogind entry if you want to force that command to respect a '.rhosts' file for the 'root' user. That man page notes that these flags are not used if PAM is enabled --- and directs you do use the /etc/pam.d/ configuration files instead. Those couple of cases should handle the vast majority of Linux distributions. I realize that my answer is basically RTFM --- but I hope I've directed you to the appropriate FM's to R. "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ Basic Emacs By Paul Anderson _________________________________________________________________ Emacs is, by nature, a very difficult program to use. Few people can even figure out how to exit it, let alone use it. I won't cover configuring emacs, as that is a whole art unto itself, one which I have yet to master. You probably already have emacs installed, I'll assume you do. At the command prompt, type: emacs Emacs will start up with a scratch buffer, which isn't really meant for anything other than scratch notes. So, we must bring emacs up with a filename on the command-line. Before we do that, we must exit emacs. Hit C-x C-c(hold down control, then press x, then press c), and it'll exit. Now, let's bring it up with a filename: emacs bork.txt The screen will look something like this: Buffers Files Tools Edit Search Mule Help ----:---F1 bork.txt (Text)--L1--All---------------------------------- - (New file) Now, let's look at the bottom status line. It displays the filename we're working on, informs that it's using the Text mode(more on emacs modes later in this doc) , that we're on line 1, and it's display all of the file. As an example of what it will display while editing a file with information in it, here's what's on the status bar on my screen: ----:**-F1 emacs.html (HTML)--L59--70%--------------------------------- - The two asterisks show that file has been changed since I last saved, I'm editing emacs.html, emacs is using it's HTML mode, I'm on line 59 and 70% of file is displayed on the screen. Now, type some text in. You'll notice the asterisks and line number. Now, let's save your masterpeice! Hit C-x C-s(that's hold down control, press x then s), and at the bottom it will say: Wrote /home/paul/bork.txt You've just saved your work! Let's exit emacs and bring it back up with our text file, and you can see for certain that the file has been saved. That covers the basics you need to get around with emacs, now on to.... _________________________________________________________________ Special Modes Emacs has a built-in LISP interpreter, making it so that emacs can be programmed to do various tasks. This allows it to handle HTML, SGML, shell scripts, C code, texinfo source, TeX source, etc. more appropriately. The classic thing to do with programmable calculators has always been to write games for them - guess what one of the classic things to do with a programmable text editor like emacs is. Emacs has a LISP-based version of the classic pseudo-AI program, Eliza. In this case, it's designed to act as a psychoanalyst. Now this part can get a bit tricky, as the official key used to run these modes is named 'meta'. PCs don't have a true-blue meta key, so it's often mapped to one of the alt keys, or a control key. Hit M-x, trying first the left alt, then right alt and same for controls, you'll know when you've hit the right one when the bottom line displays M-x with the cursor beside it. Now, type doctor and hit enter. The following text will appear on your screen: I am the psychotherapist. Please, describe your problems. Each time you are finished talking, type RET twice. Go ahead, chatter with doc for a bit. It can be entertaining... Back so soon? Well, it does get a wee bit boring after a while... Now that you're back, we're gonna write some C code to show the benefit of using emacs. I want you bring up emacs, and edit ~/.emacs Put the following in it: (add-hook 'c-mode-common-hook '(lambda () (c-toggle-auto-state 1))) This may, at first glance, look like gibberish. It's actually LISP code, at seeing this you now understand why some derisevly state that LISP really stands for Lots of Irritating Superfluous Parentheses. Fortunately, you don't need to know LISP right now - though you will have to learn it to do much configuring with emacs. Save the file, and start emacs editing a file named foo.c Type the following: #include main(){printf("\nHello.\n");} Doesn't look like what's here, does it? Notice how emacs automagically indents the code properly and indicates to you that the braces are matched? If you don't program in C, you won't realize just how neat this is. Beleive me, if you do much coding, it's a godsend! Emacs has similar modes for HTML, SGML, even plaintext. It can read e-mail, usenet news and browse the web. Emacs includes everything, including the kitchen sink. Browse the docs, and use it, and with time you will begin to use emacs to it's full capacity. May the source be with you, --Paul Anderson, paul@geeky1.ebtech.net _________________________________________________________________ Copyright © 1998, Paul Anderson Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ Creating A Linux Certification Program, Part 3 By Dan York _________________________________________________________________ The Linux certification saga continues. In my October article, I outlined why I thought Linux needs a certification program and what I thought the major characteristics of such a program should be. In my November article, I described what efforts were already underway toward Linux certification, provided pointers to resources on the Web, and explained how people could become further involved. With this article, I would like to relay the current status of our discussions, and provide additional pointers to information and resources. Specific topics in this article are: * Status of "linux-cert" discussion list and web archive of discussions * NEW LIST - "linux-cert-announce" * Linux Training Alliance * Points of consensus that have emerged from discussions * Working groups close to being formed If you have any questions about this article or the other articles, please feel free to contact me by email at dyork@Lodestar2.com or visit my list of certification pointers at http://www.linu= xtraining.org/cert/resources.html ______________________________________________________________________ Status of "linux-cert" discussion list In last month's article, I mentioned a "linux-cert" mailing list that was established to host further discussions on creating a Linux certification program. That list is operational and has had a strong volume throughout the last month. There has truly been too much discussion to adequately summarize, although the points of consensus mentioned below should give you a flavor of the list. People have been contributing from all around the world and it has been great to be a part of it all! If you would like to subscribe, send a message to: majordomo@linuxcare.com with the message: subscribe linux-cert Messages to the discussion list are sent to "linux-cert@linuxcare.com" The list is intended for people who *want* to build a certification program. This is not another place to discuss whether or not a Linux certification program *should* exist... subscribers to the list agree that, yes, we want a Linux certification program - now let's discuss how best to build one. We now have two sites that are hosting web-based archives of the mailing list where you can view what has been discussed on the "linux-cert" list. Dave Sifry at Linuxcare set up our primary archive at his site. You can see every message from the beginning of the list at: http://www.linuxcar= e.com/linux-cert/archive/ Or you can view just November's postings at: http://www.lin= uxcare.com/linux-cert/archive/9811/ Bruce Dawson also set up a second site to see the messages (albeit over a slower connection) at: http://lin= ux.codemeta.com/archives/linuxcert_archive Thanks are due to both Dave and Bruce for setting these archives up. Please visit the archives, see what we're up to, and join in our efforts. ______________________________________________________________________ New List - "linux-cert-announce" After we set up the "linux-cert" list, I had several people contact me and say that they were interested in staying up on what was going on with Linux certification, but didn't want to subscribe to a high-volume mailing list. To address this concern, we have now established a second list, "linux-cert-announce", which will be a very low volume list (probably only a few postings per month). We will only send occasional status reports and announcements to this "announce" list. It is a moderated list with a limited number of possible senders, so there will be no extra traffic or spam. If you would like to subscribe to this list, send a message to: majordomo@linuxcare.com with the message: subscribe linux-cert-announce in the message body. Thanks again to Dave Sifry at Linuxcare for setting up this second list. Note that if you subscribe to "linux-cert", you do not need to also subscribe to "linux-cert-announce". Any message sent to "linux-cert-announce" will automagically be sent to the "linux-cert" mailing list. So... subscribe to "linux-cert" if you want to be involved with the ongoing discussions and receive a strong volume of email, subscribe to "linux-cert-announce" if you only want to get occasional updates on the current status of certification discussions and plans. ______________________________________________________________________ Linux Training Alliance In order to promote the teaching of classes in Linux, I am organizing an alliance of training centers who either are currently or are planning to teach Linux classes. We now have a web site located at: http://www.linuxtraining.org/ The goals of the organization and Web site include: * to provide a central place on the Internet where potential students can learn about available Linux training resources * to publicize the classes of those training centers currently offering Linux training * to be a resource for other training centers that want to start teaching Linux classes * to promote the ongoing efforts to create a Linux certification program * to prove to courseware publishers that if they create Linux courseware there would be centers who would potentially purchase their materials * to provide another way to combat the argument made against Linux that "there is no support" If you are interested in Linux training, please visit the site and let me know what you think (it's pretty basic so far). If you are affiliated with a training center (loosely defined as a corporate training center, college, university or basically anyone else currently teaching Linux) and would like to be listed on the site (and join the LTA), please contact me at dyork@Lodestar2.com. If you are an freelance/contract instructor who would be available to teach classes in Linux, of if you have developed courseware in Linux that would be available to other training centers, please contact me as I would like to publicize your contact information as well. ______________________________________________________________________ Points of Consensus from the "linux-cert" discussion list Our discussion on the "linux-cert" mailing list has been quite involved and detailed with numerous points being debated quite intensely at times (check out the archive mentioned above). In recent days, I have asked the list to approve a number of "Consensus Points" that I have summarized from the ongoing discussions. Realizing that we will not always be able to reach consensus on every issue, we are working out a method of voting. In the meantime, I have been trying to collect the points on which we do all agree. The process is continuing as this article is being written, but so far the following points have been agreed upon: * The cost of attaining Linux certification shall be as low as possible. Costs of exams shall be targeted at only that needed to cover delivery of the exam, with perhaps a slight portion helping to offset development of the exam. * Whatever mechanism we develop for delivering Linux certification must be global in scale. People in any nation must be able to take exams toward certification. * The Linux certification program will consist of multiple levels. For instance, after perhaps 1 or 2 exams, someone becomes a "Linux Certified Professional". After 2 or 3 more, one becomes a "Linux Certified Administrator", etc. (Note that we have NOT agreed upon names.) Additionally, the following points appear headed toward consensus (but have not, as of 11/25/98, been approved by the group): * The Linux certification program will employ standardized multiple-choice exams for at least the entry and perhaps middle certification levels. The highest certification level will involve either a hands-on or oral exam of the candidate. The exact mechanism for the upper level test will be determined by a working group. * Linux certification exams will initially be developed in the English language. Exams in other languages will be made available as soon as possible depending upon financial and conversion support. * The core Linux certification program will be distribution-neutral. Distribution differences will be addressed through a required distribution-specific exam or other mechanism developed by a working group. We did not reach consensus on another point, and there are a number of other items which we cannot yet agree upon. If you are interested in being part of this process, please join the "linux-cert" mailing list mentioned above and visit the web archives to see what has already been discussed. ______________________________________________________________________ Working groups close to formation In the process of debating these consensus points, several participants have suggested we form smaller "working groups" to refine specific subjects and report back to the larger group. It looks at this point that at least one group will be launched to develop some proposals for naming conventions (i.e. "Linux Certifed Professional"? "Linux Certified Engineer?" etc.) and also to explore some possible options for the non-computer-based test for the highest level of certification. Other groups will also be launched as our efforts continue. If you are interested in being involved with this working group, please join the "linux-cert" mailing list mentioned above. ______________________________________________________________________ Final Thoughts This past few weeks on the mailing list has been quite an interesting one. The global scale of this project has brought in a wide variety of contributors and made for interesting discussions. It's been a great group of people to work with and I look forward to our evolving discussions and plans. Along the way, we also discovered another group coordinated by Evan Leibovitch from the Canadian Linux User's Exchange (CLUE) that had been discussing Linux certification since earlier this year. Evan and I have now been working together to combine the expertise from both groups and it has been a great experience - look for more exciting news and opportunities to come soon! Please join us on the list(s) and let's make this happen! Dan York is a technical instructor and the training manager for a technology training company located in central New Hampshire. He has been working with the Internet and UNIX systems for 13 years. While his passion is with Linux, he has also spent the past two-and-a-half years working with Windows NT. He is both a Microsoft Certified System Engineer and Microsoft Certified Trainer and has also written a book for QUE on one of the MCSE certification exams. He is anxiously awaiting the day when he can start teaching Linux certification classes. He can be contacted electronically at dyork@Lodestar2.com. Previous ``Linux Certification'' Columns Linux Certification Part #1, September 1998 Linux Certification Part #2, October 1998 _________________________________________________________________ Copyright © 1998, Dan York Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ A Linux Journal Preview: This article will appear in the January 1999 issue of Linux Journal. _________________________________________________________________ 1998 Editor's Choice Awards By Marjorie Richardson _________________________________________________________________ When the LJ staff decided to have Editor's Choice Awards this year in addition to the Readers' Choice, I agreed without truly realizing how difficult it would be to make decisions. So many fine products that support Linux are available today, and the number grows daily. This has indeed been a good year for Linux users, beginning with the announcement that Netscape would become open source and proceeding through the announcements of support for Linux by all the major database companies. _________________________________________________________________ [INLINE] Product of the Year--Netscape Communicator I must admit this one wasn't a hard decision. It is my belief that Netscape's announcement that Communicator would be open source started it all. This announcement galvanized the world to find out about the Open Source movement and the Linux operating system that was responsible for its creation. Linux needed a big company in its corner in order for the word to spread, and Netscape provided just the initiative that was needed. _________________________________________________________________ Most Promising Software Newcomers--GNOME and KDE This was probably the most difficult decision, so it ended in a tie. So many new products are available for Linux this year; finally, the flood of software applications we have all been waiting for is happening. However, the one thing everyone has always said Linux needs to become competitive with the commercial operating systems is a user-friendly desktop--both GNOME and KDE are filling this need. _________________________________________________________________ [INLINE] Best New Gadget--Schlumberger Smart Card While I was given some interesting suggestions for this one, I never had any doubt that the Smart Card was the proper choice. A credit card with a Linux CPU on it is just too extraordinary. The computer chip embedded in the card stores not only mundane information about the card holder, but also biometric information that can be used for identification--talk about great security! The suggestion most people gave me was the PalmPilot, which is indeed a cool product, but even though Linux runs on it, the port was done by programmers outside 3Com. According to Mr. Bob Ingols, a 3Com staff member, 3Com does not support Linux and does not plan to. _________________________________________________________________ [INLINE] Best New Hardware--Corel NetWinder Corel Computer was the first company to declare Linux as its operating system of choice and sell computers with Linux pre-installed. With the continuing growth of Internet popularity, the network computer's day has come and the NetWinder is one of the best. It is small, powerful and easily configured. Best of all, it comes with Linux. Debian's recent port to the ARM architecture means that it too will run on the NetWinder. A close second was the Cobalt Qube Microserver--not only is it a great little server, it's cute too. _________________________________________________________________ [INLINE] Best New Application--Informix Another tough one. My initial choice was the GIMP, but it's been around for some time (my first thoughts always seem to be free software). At any rate, a port of a major database to Linux has long been anticipated, and Informix made the breakthrough with other database companies following suit. With support from Informix, Linux can now enter the business ``big leagues''. A close second, in my mind, is Corel's WordPerfect 8 for Linux for the same reason--to be accepted in the workplace, Linux needs this product. _________________________________________________________________ [INLINE] Best New Book--Samba: Integrating UNIX and Windows Some might call ``foul'' on this one, because it is published by SSC. However, this award is for the book and the author, John Blair, not for the publisher. Samba: Integrating UNIX and Windows was needed and its popularity has proved it. John has written a comprehensive book of interest to all who are running multi-OS shops. The book has been endorsed by the Samba Team, who has gone so far as to make John a member. If the award had been for ``best all-around book on Linux'', I would have given it to the ever-popular (with good reason) Running Linux by Matt Welsh, published by O'Reilly & Associates. _________________________________________________________________ Best Business Solution--Linux Print System at Cisco In our October issue, we had a great article called ``Linux Print System at Cisco Systems, Inc.'' by Damian Ivereigh. In it, Damian described how Cisco was using Linux, Samba and Netatalk to manage approximately 1,600 printers worldwide in mission-critical environments. He also described how he did it and supplied the source code he used, so that others could also benefit from this solution--a wonderful way to contribute to the Linux community. _________________________________________________________________ Most Desired Port--QuarkXPress Linux Journal uses Linux as its operating system of choice on all but one lone machine. For layout, we must have an MS Windows 95 machine in order to run QuarkXPress. Each month we hold our breath during the layout period hoping that when Windows crashes (it always does), it won't be at a critical juncture. Crashing for no apparent reason creates extra work for Lydia Kinata, our layout artist, and much stress for all of us each month. We are more than ready to be rid of this albatross and have a total Linux shop. Next, like everyone else, we'd like Adobe to port all its products to Linux. _________________________________________________________________ Copyright © 1998, Marjorie Richardson Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ A Linux Journal Review: This article appeared first in the December 1999 issue of Linux Journal. _________________________________________________________________ Product Review: Happy Hacking Keyboard By Jeremy Dinsel _________________________________________________________________ * Manufacturer: PFU America Inc. * E-mail: hhkb-support@pfuca.com * URL: http://www.pfuca.com/ * Price: $139 US with one cable, $30 for extra cable * Reviewer: Jeremy Dinsel The Happy Hacking Keyboard is a cute and fuzzy streamlined keyboard designed specifically with programmers in mind. While not a single bit of fuzz is actually on the keyboard, its size makes it cute, if not disorienting, to people used to the standard IBM PC keyboard. [INLINE] According to PFU America, the keyboard's design makes it easier for programmers to reach the keys they want quickly and efficiently. They claim having fewer keys on the keyboard increases efficiency by preventing users from overextending their fingers on certain keystrokes. Installation The Happy Hacking Keyboard arrived in a tiny box shortly after I agreed to do a review of the product. Inside were the keyboard and three cables (for a PS/2, Macintosh and Sun computer) along with the usual manual and warranty information. PFU America recently changed the package, and lowered the price. The Happy Hacking Keyboard now comes with only one cable (of the customer's choice), but additional cables are available for $35.00 each. The cables are expensive because they are handmade by the people at PFU America. The manual was fairly straightforward--after all, almost everyone knows how to hook up a keyboard. However, with the many cables that accompanied the keyboard, it was comforting to know that documentation was available should it be needed. After the computer was powered down, I said goodbye to my 101 Enhanced keyboard and hello to blissful days of Happy Hacking. Or so I thought--I had to grab a PS/2 to AT keyboard adapter first. Life is a Series of Adjustments The keyboard is streamlined, containing only 60 keys. A function key is included that can be used in combination with other keys; as a result, awkward finger positioning is sometimes required. My first days using the keyboard reminded me of playing Twister and trying to reach the red dot by squeezing my arm past two opponents while keeping my feet on the orange and blue dots on opposite sides of the mat. In fact, two weeks later, I was still finding myself reverting to my old PC keyboarding habits. Some complex key sequences were hard to complete correctly, as old habits die hard. Also, in the beginning, the backspace key didn't work; however, this turned out to be primarily my fault. Being lazy and excited to test out the new keyboard, I refrained from reading all the way through the manual to the final (third) page where a table and accompanying figure would have taught me how to program the keyboard using a slider switch. Eventually, I toggled the switch and had the backspace key working to my satisfaction. Since I started using Linux before Windows 95 was introduced (I stopped using MS products long before that), I did not miss the extra ``Windows'' keys found on most PC keyboards. I did, however, have to get used to console cruising with the new keyboard. Switching from X to the console requires a four finger/key combination (ctrl-alt-fn-f*, where fn is the function key), while cruising through consoles requires a three finger/key combination (alt-fn-arrow-key). Even in a non-vi-type editor without command mode movement keys, the Happy Hacking Keyboard makes the user adjust to finding the location of the arrow pad and remembering to hit the function key. In all fairness, it took me less than a week to become oriented with the key locations. (It does remain comical to watch others try to wander through the key selections for the first time.) Unlike a laptop, the size and shape of the keys are the same as on a PC keyboard, making it easier to adjust. I never overreach the true location of the keys and don't have a difficult time typing something on other people's computers (who don't have a Happy Hacking Keyboard). However, I am now known to complain about how ``weird'' other keyboards are. Happy Hacking While the keyboard did not cure me of my sarcastic nature, I did find the escape key much easier to reach since it's located to the immediate left of the ``1'' key. In vi, I can quickly switch out of insert mode since I never have to look down to relocate the escape key or reposition my fingers afterwards; thus, cruising through vi has become even easier. For XEmacs programming, the control key is located in the ``right'' place, directly left of the ``A'' key. This makes it easy to use without any odd movements or taking your fingers away from the home row. (Yes, I learned to type before I learned to program.) Both of these key locations, escape and control, have allowed me to quickly negotiate commands without having to reposition my fingers. This has the benefit of reducing the frustration of trying to return to the home keys after each command--my fingers never wind up in odd locations as they did on a typical PC keyboard. Disgruntled Gamer As a part-time game player (Linux Quake), I'm accustomed to using the keyboard for all player movements, such as turns and running. With this keyboard, I'd have to hold the function key down constantly (to select the arrow keys) or figure out how to use the mouse. Otherwise, keeping the function key depressed (two keys away from the arrow keys) and trying to fumble around with the arrows might increase the probability of developing carpal tunnel syndrome. After a few games of Quake, I think I'll be comfortable with the bizarre fingering required. Also, using the keyboard to program in XEmacs helped in the adjustment needed to get into the gaming world. Technical Support and On-line Documentation Documentation is also available on-line. While I haven't had to use their tech support e-mail, it is readily available--my contact at PFU America was quick to reply to any e-mail I sent. Furthermore, all of the information needed to install and hook up the keyboard can be found on-line. All of the information in the manual is included in their on-line documentation. In Closing Overall, I would be hard-pressed to sum up this review with anything but a positive remark. With the price tag recently dropping by $40, the keyboard is more affordable. I'm sure other hackers will be quite happy to own it. For someone who hasn't experienced the keyboard, it's hard to believe everything reported about the Happy Hacking Keyboard by PFU America. In fact, I was skeptical about the remarks I had heard before I became a Happy Hacking Keyboard user. Now, one month after laying my fingers on it, I can't imagine using any other keyboard. I wonder if PFU America makes a Happy Hacking tote bag. _________________________________________________________________ Copyright © 1998, Jeremy Dinsel Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ Getting Started with Linux Version 1.0 November 98 By Prakash Advani _________________________________________________________________ This document is written for people who have just installed Linux but don't know what to do next. Most of the commands discussed here should work on all distribution of Linux but since I use Red Hat 5.0 some of them may be specific to Red Hat 5.0. I have also used Caldera OpenLinux 1.3 and have included some Caldera specific information. If any of you have any suggestions or ideas to improve this document, they are most welcome. All commands are in quotes and you need to type them without the quotes. For example if you see type "ls" then you just need to type ls. You will also have to press the ENTER key after typing each of the commands. There are some useful commands in the document but for complete command reference you will need to refer to additional documents. _________________________________________________________________ Let us begin with first booting into Linux. When you boot Linux, you will see a lot of messages coming up. You need not understand all of them right now but if you get some errors while booting, you may want to look at them. These help in understanding them and do any troubleshooting if required. First thing you must do is login in to your Linux system. At the login prompt type "root" (or whatever username you have created) and put in the password. The password is selected at installation. If you installed linux on your machine then you are the root user and you have supervisory access to the system. If you didn't choose any password then the system will not ask for a password, instead take you straight to the Linux prompt. You will now come to the Linux prompt. The prompt will be a # if you are root or will be a $ if you are some other user and have chosen the BASH shell. If you are new to Linux then you should use the BASH shell. Out of several shells under Linux, I prefer BASH because it is easy to use. BASH is also the default on most Linux Distributions. Your prompt may look something like. [root@yoom.com /root]# If you need to logout just type "exit". Once you have logged in type "dmesg" to see the bootup messages. You will see something like: Serial driver version 4.13 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16450 tty01 at 0x02f8 (irq = 3) is a 16450 Real Time Clock Driver v1.07 hda: QUANTUM FIREBALL_TM2110A, 2014MB w/76kB Cache, CHS=1023/64/63 hdc: CREATIVECD2421E, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8 raid0 personality registered DLCI driver v0.30, 12 Sep 1996, mike.mclagan@Linux.org. Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 16092k swap-space (priority -1) Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 3.1 detected OK (220) sb: Interrupt test on IRQ5 failed - device disabled. YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 sysctl: ip forwarding off Swansea University Computer Society IPX 0.34 for NET3.035 IPX Portions Copyright (c) 1995 Caldera, Inc. You will realise that the messages scrolled down before you could read them. To see them page by page type "dmesg | less" or "dmesg | more". The dmesg command provides valuable information about the hardware devices detected by Linux. It also helps in knowing if there was some problem somewhere. Like if you see the line: sb: Interrupt test on IRQ5 failed - device disabled. It means there was a problem with setting up of the Sound Blaster sound card at IRQ5. If you get such errors, it may mean that some of your hardware is not working correctly under Linux. The BASH shell has a lot of ease of use. If you like working a lot on the command line, you will find it very easy. The bash shell allows using the previous command by press the up arrow key. You can also search for previous commands by typing "CTRL-R" and typing some words from the previous commands. To clear the screen press CTRL-L or simply type "clear". Another important command is df. Just type "df" and you will see something like: Filesystem 1024-blocks Used Available Capacity Mounted on /dev/hda6 388362 341804 26501 93% / /dev/hda5 614672 572176 42496 93% /dosd This gives information of all your mounted hard disk partitions, available space and used space. The space shown is 1024 blocks which is 1024 bytes or one Kilo Byte. It also shows at which directory the partition is mounted. Like in DOS and Windows partitions and devices are allotted drive letters such as C:, D:, E:; in Linux partitions or devices are mounted onto directories. For example /dev/hda5 is mounted on /dosd. Normally /dosc, /dosd, would be your mounted dos partitions. It could also be anything else. Which means you can access your Dos files through Linux by going through these directories. Another useful command is ls. Type "ls" and you will see something like: bin/ dev/ etc/ lost+found/ proc/ tmp/ boot/ dosc/ home/ mnt/ root/ usr/ cdrom/ dosd/ lib/ opt/ sbin/ var/ Type "ls -l" to see a more complete list. This will show the owners, permissions, date and time of when last modified and file sizes. You will need to understand file permissions once you get the hang of the basic Linux operations. Permissions are useful for multiuser Linux system where you need to restrict or allow access to files or directories. drwxr-xr-x 2 root root 2048 Sep 17 12:49 bin/ drwxr-xr-x 2 root root 1024 Oct 4 23:24 boot/ drwxr-xr-x 2 root root 1024 Sep 2 17:32 cdrom/ drwxr-xr-x 3 root root 21504 Oct 22 12:54 dev/ drwxr-xr-x 2 root root 1024 Oct 2 21:59 dosc/ drwxr-xr-x 13 root root 21504 Jan 1 1970 dosd/ The cd command is used to change directories, you can try by typing "cd /" to go the root directory. Type "cd -" to return back to where you were. If you just type "cd" you will return back to your home directory. Installing softwares, opening compressed files under Linux. If you download documents, utilities, softwares or anything else for Linux, you will find that a lot of them have extensions of .tgz or .tar.gz. In that case you will have to type the following command to extract the files. Replace filename.tar.gz with the name of the file. gzip -dc filename.tar.gz | tar xvf - If you downloaded some Linux files under DOS, chances are that the file names may get truncated. In that case you will have to rename your files before extracting them under Linux. To rename files just type "mv oldfilename newfilename". Replace oldfilename with what the current file name is and replace newfilename with what you want the file name to be. Several files are also in the .rpm format. These formats are for the Red Hat and Caldera distribution and they are also used by other distributions. To install rpm's type rpm -i filename.rpm If you are upgrading an existing software type rpm -U filename.rpm If your distribution does not support RPM's you can add that support by installing the RedHat Packet Manager (RPM). Similarly there is pkginstall under some distributions to manage .tar.gz files. Man Man! What's man man ? These are help pages or manuals to get some help on a specific command. To get help on man type "man man". Similarly to get help on rpm type "man rpm". To get help on ls type "man ls" and so on. You can get help on all the command using man. To begin with get help on commonly used commands. These commands will help you move around files and directories. Some commonly used commands are: cat To type the content of a file cp Copy files du To check the disk space used pine Email client find Find files on the linux system grep Search for keywords on a file or a command kill To kill any process, ps to see the process number less If you cat a file you can pipe it to less for page by page viewing ln Create or remove links between files or directories lpr Print files or output to a printer ls List files or directories mkdir To create a new directory more Similar to less but less is better than more! mount See the mounted devices or mount additional devices umount Unmount mounted volumes mv Move or rename a file passwd Change your password ps To see the processes running rm Remove files or directories rmdir Remove directories useradd Add a user to the linux system userdel Delete a user on the linux system usermod Modify a user on the linux system which Find where a program is located who Displays the users logged in zless To see the content of a .gz file (compressed) Some more tips for bash users. If you know that the first letter of a command for example is a but don't know the rest type "a" and then press TAB twice and bash will show the list of possibilities. You can also press a single tab to complete a command if there is only one possibility. This saves a lot of typing time. Example type "mou" and then press TAB, bash will put mount on the command line. Pressing TAB twice shows all the Linux commands. It looks something like: There are 1212 possibilities. Do you really wish to see them all? (y or n) Type "y" and you will see all of them! Sometimes if you type a command, the screen may scroll by too fast for you to read, unless you are superman. In that case you can see the previous screen by pressing Shift and PG-UP keys together. If you type some commands, you can break by pressing CTRL-C or ESC. It may not work in man or less, in that case just type "q".If you need to edit some files try pico or joe. These are two easy to use editors. Joe works more like WordStar and pico is the editor for Pine. Power users may try vi or emacs. These two are very powerful editors but have a high learning curve. Examples would be type "joe filename". Replace the filename with the name of the file that you wish to edit. Most distrbutions install X-Window. To start X-Window type "startx". X-Window is a GUI for Windows. There are several flavours available which give you different look and feel. To configure a redhat system type "setup". If you are under Caldera type "lisa". You can also configure through a GUI interface under X-Window. Most users may want to use some dos floppies or partitions. You can type some dos commands under Linux without mounting your devices. Type "man mtools" to see a list of these commands. These commands start with m, example the dos copy command would be mcopy. Similarly there are several commands such as mattrib, mcd, mcopy, mdel, mdeltree, mdir, mformat, mlabel, mmd, mrd, mmove, mren, mtype, mzip, etc.To see some more Linux documentation's look under the following directories. If the files have .gz extension the to view them type "zless filename.gz" replace filename with the name of the file. /usr/doc/FAQ /usr/doc/LDP/install-guide /usr/doc/mini/usr/doc/HOWTO Prakash Advani is an Internet and Systems consultant based in Mumbai, India. Currently we are setting up a Web site dedicated on Free Operating Systems [www.FreeOS.com] including Linux. Any help would be greatly appreciated. _________________________________________________________________ Copyright © 1998, Prakash Advani Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ A Linux Journal Preview: This article will appear in the February 1999 issue of Linux Journal. _________________________________________________________________ The GNOME Project By Miguel de Icaza _________________________________________________________________ GNOME is an acronym for GNU's Network Object Model Environment. GNOME addresses a number of issues that have not previously been addressed in the UNIX world: * Providing a consistent user interface. * Providing user friendly tools and making them powerful by leveraging the UNIX foundation. * Creating a UNIX standard for component programming and component reuse. * Providing a consistent mechanism for printing. GNOME's main objective is to provide a user-friendly suite of applications and an easy-to-use desktop. As with most GNU programs, GNOME has been designed to run on almost all strains of UNIX-like operating systems. History of GNOME The GNU GNOME project was initially announced in August, 1997, and after just one year of development, approximately two hundred programmers worldwide are involved in the project. The original announcement called for developers in a number of forums, shaping the GNOME project: the GNU announce mailing lists; the Guile mailing list; and the GTK+ and GIMP mailing lists. The programmers and people who influenced the project were mainly free software enthusiasts with diverse areas of expertise, including graphics programming and language design. The GNOME team has been working steadily toward creating a foundation for future free software development. GNOME provides the toolkit and reusable component set to build the end-user free software the world so badly needs. Our recent releases of the GNU Network Object Model Environment have been: GNOME 0.20, the first version of GNOME that showed signs of integrations, released in May 1998; The Drooling Macaque 0.25 release, with more features; and finally our latest public release, GNOME 0.30, code named Bouncing Bonobo. The GNOME 0.20 release was the first release included in a CD-ROM distribution: Red Hat 5.1 shipped with a technology preview of the GNOME desktop environment, and it was first demonstrated at the 1998 Linux Expo in North Carolina. Before the Drooling Macaque release, the GNOME software releases were coordinated by two or three people on the team. This became a significant burden, as precious time was being used coordinating each release. We have been trying to make the release process more modular and have assigned different modules to package maintainers. Each package maintainer is responsible for packing, testing and releasing their packages independently of the main distribution, which we consider to be the core libraries and the core desktop applications. So far, we have had some success, but there is still room for improvement. We will continue to polish the release process to make it simpler. The most recent GNOME release, Bouncing Bonobo, is the first to feature the GNOME spreadsheet, Gnumeric. Red Hat Advanced Development Labs In January 1998, Red Hat announced the creation of the Red Hat Advanced Development Laboratories (RHAD). The initial objective of Red Hat Labs would be to help the GNOME effort by providing code and programmers and by helping us manage the project resources. All code contributed by Red Hat Advanced Laboratories to GNOME has been provided under the terms of the GNU GPL and the GNU LGPL licenses. Several GTK+ and GNOME developers have been hired by Red Hat, and they have rapidly provided the GNOME project with a number of important features. For example, Rasterman has implemented themes for GTK+; the GTK+ themes allow the user to change the appearance of the widgets. This is done by abstracting the widget drawing routines from the toolkit, and putting those drawing routines in modules that can be loaded at runtime. Thus, the user can change the appearance of applications without shutting them down or restarting the desktop. GTK+ themes are fully working, and so far a number of theme front-ends have been written. At the time of this writing, the available themes include Motif, Windows95, Metal, native-GTK+ and a general purpose Bitmap-based engine (see Resources). Various important changes to the GTK+ toolkit required for the GNOME project, such as the menu keyboard navigation code and the enhanced ``Drag and Drop'' protocols (XDND and Motif DND), were written by Owen Taylor, a famous GTK+ hacker now working for Red Hat Labs. Assorted applications were created or are maintained nowadays by the GNOME team at RHAD as well: the Ghostscript front end (by Jonathan Blandford), the GNOME Help Browser and the GNOME RPM interface (Marc Ewing and Michael Fullbright), the GNOME Calendar and GNOME Canvas (Federico Mena) and the ORBit CORBA 2.2 implementation (Elliot Lee). Other Donations The GNOME project received a monetary donation from the GNU/Linux Debian team in the early stages of the project, as well as an Alpha board from Quant-X Service and Consulting G.m.b.H. We are very grateful for their contributions. Some Key GNOME Features The GNOME libraries provide a framework to create consistent applications and to simplify the programmer's task. More of the features of the GNOME libraries are described later. Some of the most important current developments in the GNOME libraries are discussed here. Metadata One of the problems that a desktop environment faces is the fact that it is usually necessary to have a mechanism for storing information about a file's properties. For example, applications might want to bind an icon for a specific executable file or bind a small thumbnail image for a graphic produced by a graphics program. These icons should be semantically attached to the main file. The Macintosh OS, for example, provides a way to store this information in the file as its ``resource fork''. This mechanism would be awkward at best to implement in a UNIX environment. The main problem is that non-metadata-aware application can cause the metadata information to get out of sync. The GNOME metadata was implemented by Tom Tromey at Cygnus, given a number of design constraints and tradeoffs (described in detail on their web site). The following is a list of the GNOME metadata features: 1. Binding the information on a per-file basis is a per-user setting, and each user keeps track of its own bindings. System defaults apply on top of these. 2. Binding information by file content is done according to the type of the file using file signatures, similar to the UNIX file command. 3. Binding information by a regular expression: for example, a default icon for gif files would be provided by the regular expression *.\.gif$. 4. The metadata system is optimized to provide a coherent GUI solution, rather than as a compromise or kludge to existing command line tools. 5. Most ordinary uses of files will continue to work without metadata, just as they do now. A number of standard properties for file metadata are available in GNOME. For example, ``View'' stores the action for viewing the file contents; ``Open'' stores analogous action for editing; ``Icon'', which contains the icon, is used for displaying the file on the desktop. Metadata types are MIME types. Canvas GNOME provides a Canvas widget, patterned after Tk's excellent canvas. This widget simplifies the programming of applications that need control over graphical components. The most noticeable feature of the GNOME Canvas is that it provides a flicker-free drawing area where high-level objects can be inserted and manipulated. Basic zoom and scroll facilities are also a part of the canvas. The high-level objects inserted into the canvas behave like regular widgets. They can receive X events, they can grab the focus, and they can grab the mouse just like a regular widget. As with their Tk counterparts, the GNOME Canvas items can have their properties changed at runtime with a Tk-like configuration mechanism. The GNOME Canvas ships with a number of items derived from the GnomeCanvasItem object: lines, rectangles, ellipses, arrows, polylines and a generic widget container to embed GTK+ widgets within a canvas. The Canvas framework is designed to be very extensible. As proof of this extensibility, the GNOME spreadsheet is implemented on top of the base canvas engine, with additional functionality provided by spreadsheet-specific CanvasItems. Note that the current Canvas uses Gdk primitives (a thin wrapper over Xlib primitives) to draw, so it is limited in the quality and range of special effects that can be provided with it, which bring us to the next step in Canvas technology. Raph Levien is working on an advanced rendering engine for the Canvas. It was originally developed as a stand-alone widget within his Type1 outline font editor, gfonted. As of the time of this writing, work on integrating the engine into the Canvas is getting underway. Features of this engine include: * Anti-aliased rendering of all items * Alpha transparency * Items for vector and bezier paths * Items for RGB and RGB plus alpha images * Vector operations, including clip (intersect), union, difference and stroke layout * PostScript Type1 font loading and rendering The engine's design goal is to support almost all of the PostScript imaging model with the addition of alpha transparency. As such, it is expected to be an excellent starting point for high-powered graphics applications. In spite of the ambitious goal of keeping the display up to date with entirely anti-aliased and alpha-composited items, performance is surprisingly good--comparable in fact to the Xlib-primitive-based canvas engine. His code is expected to be merged into the main Canvas sometime soon. Window Manager Independence GNOME does not have any dependency on a special window manager--any existing window manager will do. GNOME specifies window manager hints that can be implemented by the window manager to give the user better desktop integration, but they are optional. The E window manager implements all of the GNOME window manager hints and can be used as a reference implementation for people wishing to extend their window managers to be GNOME-compliant. The ICEWM manager is tracking those developments, and it is also considered to be a GNOME-compliant window manager, although at this time, it is lagging a bit behind. People have showed interest in providing the WindowMaker and FVWM2 maintainers with patches to make those window managers GNOME-aware. Component Programming Historically, one of the attractions of UNIX has been the philosophy of small tools that each do one thing well, and combining these tools, using pipes and simple shell scripts, to perform more complex tasks. This philosophy works very well when the data objects are represented as plaintext and the operations are effectively filters. However, this UNIX command-line philosophy does not scale well to today's world of multimedia objects. Thus, it would be nice to have a framework in GNOME that would provide software reuse and component plugging and interaction, i.e., connecting small specialized tools to carry out complex tasks. With this infrastructure in place, GNOME applications can once again return to the UNIX roots of simple, well-specialized tools. An RPC system was then required for providing this sort of functionality, so we decided to use CORBA (the Common Object Request Broker Architecture) from the Object Management Group (OMG). CORBA can be thought of as an object-oriented RPC system, which happens to have standardized bindings for different languages. CORBA opened a range of applications for us. Component programming allowed us to package programs and shared libraries as program servers that each implement a specific interface. For example, the GNOME mail program, Balsa, implements the GNOME::MailMessage interface that enables any CORBA-aware program to remotely compose and customize the contents of a mail message and send it. It is thus possible to replace the mail program with any program that implements the GNOME::MailMessage interface. As far as the GNOME desktop is concerned, the process just implements the GNOME::MailMessage interface. This means, for example, that I will be able to continue using GNUS to read my mail and have GNUS completely integrated with the rest of my desktop. This also applies to the other components in the GNOME system: the address book, the file manager, the terminal emulation program, the help browser, the office applications and more. Besides providing the basic GNOME interfaces, applications can provide an interface to their implementation-specific features. This is done by using CORBA's interface inheritance. A specific interface would be derived from the more general interface. For example, GNUS would implement the GNOME::MailMessage interface and extend it with GNUS specific features in the GNOME::GnusMailMessage interface. This interface would hypothetically allow the user to customize GNUS at the Lisp level, something other mailers may not do. Another example would be a GNOME::MozillaMailMessage interface that would let the user configure the HTML rendering engine in Mozilla mail. Not only does CORBA address these issues, but CORBA can also be used as a general interprocess communication engine. Instead of inventing a new ad-hoc interprocess communication system each time two programs need to communicate, a CORBA interface can be used. Embedding documents into other documents has been popularized by Microsoft with their Object Linking and Embedding architecture. A document-embedding model similar in spirit is being designed for GNOME (the Baboon model), and all of the interprocess communication in this model is defined in terms of CORBA interfaces. Initially, we were very excited by the possibilities CORBA presented us, but we soon realized that using CORBA in the GNOME desktop was going to be more difficult than we expected. We tried using Xerox's ILU for our CORBA needs. The license at the time did not permit us to make modifications to the code and redistribute them, an important thing for the free software community, so we had to look for alternatives. Xerox has since changed the licensing policy. After evaluating various free CORBA implementations, we settled on MICO, as it was the most feature-full free implementation. MICO was designed as a teaching tool for CORBA, with a primary focus on code clarity. Unfortunately, we soon found that MICO was not a production-quality tool suitable for the needs of GNOME. For one, we found that the rather indiscriminate use of C++ templates (both in MICO and in MICO-generated stubs) proved to be a resource hog. Compiling bits of GNOME required as much as 48MB of RAM for even the simplest uses of CORBA, and this was slowing down our development. Another problem was that MICO only supported the C++ CORBA bindings. Even though an initial attempt had been made at providing C bindings, they were incomplete and not well-maintained. To address these problems, Dick Porter at i2it and Elliot Lee at Red Hat labs wrote a C-based, thin and fast CORBA 2.2 implementation called ORBit. As soon as ORBit became stable, the use of CORBA throughout GNOME began, after a delay of almost eight months. With an efficient, production quality CORBA implementation under our control, we ensure that CORBA-enabled interprocess communication is a valuable service for application programmers, rather than a source of overhead and bulk. Dissecting a GNOME desktop Application The toolkit GNOME desktop applications have been built on top of the object-oriented GTK+ toolkit originally designed as a GUI toolkit for the GNU Image Manipulation Program (GIMP). GTK+ has been implemented on top of a simple window and drawing API called Gdk (GTK Drawing Kit). The initial version of Gdk was a fairly thin wrapper around the Xlib libraries, but a port to Win32 and a port to the Y windowing system are presently in alpha stages. GTK+ implements an object system entirely in C. This object system is quite rich in functionality, including classical single inheritance, dynamic creation of new methods and classes, and a ``signal'' mechanism for dynamically attaching handlers to the various events that occur in the user interface. One of GTK's great strengths is the availability of a wide range of language bindings, including C++, Objective-C, Perl, Python, Scheme and Tom. These language bindings provide access both to GTK+ objects and to new objects programmed in the language of choice. An additional feature of GNOME is Rasterman's Imlib library. This library is implemented alongside Gdk, and provides a fast yet flexible interface for loading and saving images, and rendering them on the screen. Applications using Imlib have quick and direct access to PNG, GIF, TIFF, JPEG and XPM files, as well as other formats available through external conversion filters. The Support Libraries C-based GNOME applications use the glib utility library. Glib provides the C programmer with a set of useful data structures: linked lists, doubly linked lists, hash tables (one-to-one maps), trees, string manipulation, memory-chunk reuse, debugging macros, assertion and logging facilities. Glib also includes a portable interface for a dynamic module facility. The GNOME libraries The GNOME libraries add the missing pieces to the toolkit to create full applications, dictate some policy, and help in the process of providing consistent user interfaces, as well as localizing the GNOME applications so they can be used in various countries. The current GNOME libraries are: GTK+-xmhtml, gnome-print, libgnome, libgnomeui, libgnorba, libgtop, gnome-dom and gnome-xml. Other libraries are used for specific applications: libPropList (soon to be replaced by a new configuration engine) and audiofile. The main non-graphical library is called libgnome. This provides functions to keep track of recently used documents, configuration information, metadata handling (see below), game score functions and command-line argument handling. This library does not depend on the use of a windowing system. As we use CORBA to achieve parts of our desktop integration, we have a special library that deals with various CORBA issues, called the libgnorba library. It provides GUI/CORBA integration (to let our GUI applications act as servers), authentication within the GNOME framework, and service activation. The gnomeui library, on the other hand, has the code that requires a window system to run. It contains the following components: * The GNOME session management support * Widgets, both as straightforward extensions of GTK+ and designed to be dependent on libgnome features * A set of standard dialog boxes otherwise not available on GTK+, well-integrated with other GNOME libraries * Standard property configuration dialog boxes * Standard top-level window handling * A multi-document interface (gnome-mdi) * Windowing hints * CORBA integration where required GTK+-XmHTML is a port of the Koen D'Hondt's XmHTML widget for Motif, and it is used for our HTML display needs. Our changes are being folded back into the main distribution. The gtop library allows system applications to be easily ported to various operating systems; it provides system, process and file system information. gnome-xml provides XML file loading, parsing and saving for GNOME applications, and it is being used in the GNOME spreadsheet (Gnumeric) and in the GNOME word processor program. gnome-dom provides an implementation of the World Wide Web Consortium's Document Object Model for GNOME applications. By the time you read this article, gnome-dom will have been deployed widely in the GNOME office applications. Both gnome-xml and gnome-dom were developed by Daniel Veillard from the World Wide Web Consortium. gnome-print implements GNOME's printing architecture. It consists of a pluggable rendering engine, as well as a set of widgets and standard dialog boxes for selecting and configuring printers. In addition, gnome-print is responsible for managing outline fonts, and contains scripts that automatically find fonts already installed on the system. The GNOME print imaging model is modeled after PostScript. Basic operations include vector and bezier path construction, stroking, filling, clipping, text (using Type1 fonts, with TrueType to follow shortly) and images. At this time, gnome-print generates only PostScript output. However the design of the imaging model is closely synchronized with the anti-aliased rendering engine for the Canvas, and it is expected that these two modules will be interoperating soon. In particular, it will be possible to ``print'' into a canvas, useful for providing a high-quality screen preview, and to print the contents of a canvas. This feature should simplify the design of applications that use the Canvas, as very little extra code will be needed to support printing. The same rendering engine will be used to render printed pages directly without going through a PostScript step. This path is especially exciting for providing high-quality, high-performance printing to color ink-jet printers, even of complex pages containing transparency, gradients and other elements considered ``tricky'' in the traditional PostScript imaging model. Bindings One explicit goal of GNOME was to support development in a wide range of languages, because no single language is ideal for every application. To this end, bindings for both GTK+ and the GNOME libraries exist for many popular programming languages, currently C, C++, Objective-C, Perl, Python, Scheme and Tom. The early involvement of Scheme, Tom and Perl hackers in both the GTK+ and GNOME projects has helped in making the GTK+ and GNOME APIs easy to wrap up for various different languages. Multi-language support is ``baked in'' to the design of GTK+ and GNOME, rather than being added on as an afterthought. Development model GNOME is developed by a loosely coupled team of programmers around the world. Project coordination is done on the various GNOME mailing lists. The GNOME source code is kept on the GNOME CVS server (cvs:cvs.gnome.org:/cvs/gnome/). Access to the source code through Netscape's Bonsai and LXR tools is provided at http://cvs.gnome.org/, to help programmers get acquainted with the GNOME source code base. Most developers who have contributed code, major bug fixes and documentation to GNOME have CVS write access, fostering a very open atmosphere. GNOME developers come from a wide range of backgrounds and have diverse levels of skills and experience. Contributions from less experienced people have been surprisingly helpful, and the older, wiser coders have been happy to mentor the younger contributors on the team. The GNOME developer community values clean, maintainable code. Even programmers with many years of coding experienced have noted how the GNOME project has helped them write better code. The GNOME Office Suite Applications As the GNOME foundation libraries become more stable, the development of larger programming projects has become possible and has allowed small teams of developers to put together the applications which will make up the GNOME office suite. As with other GNOME components, the GNOME office suite is currently catching up with commercial offerings. By providing an office suite which is solid, fast and component-based, the code written for the GNOME project might become the foundation for a new era of free software program development. The office suite leverages a lot of knowledge many of us have acquired during the past year while developing various GNOME components. Our coding standards are higher, the code quality is better, and the code is more clean and more robust. The availability of these applications has provided us with the test bed we required to complete our document embedding interfaces (the Baboon model). There are two word processing projects going on for GNOME: one of them is GWP by Seth Alves at the Hungry Programmers and the other one is Go from Chris Lahey. GWP is currently more advanced and has printing working with the GNOME printing architecture. Gnumeric, the GNOME spreadsheet project, is aimed at providing a commercial quality spreadsheet with advanced features. It provides a comfortable and powerful user interface. As with other components in GNOME, we have worked toward providing a solid and extensible framework for future development. Recently, work has begun on Acthung, the GNOME presentations program. It is still in the early stages of development. Getting GNOME Tested source code releases of GNOME are available from GNOME's ftp site: ftp://ftp.gnome.org/. It is also possible to get the very latest GNOME developments from the Anonymous CVS servers. Check the GNOME web page for details on how to pull the latest version straight from the CVS servers. Breaking news about GNOME is posted to the GNOME web site in http://www.gnome.org/, along with documents to get you started on GNOME and developing GNOME applications. _________________________________________________________________ Acknowledgments There is no way to thank all of the contributors to the GNOME project in this space. All of these contributions are gratefully appreciated. I would like to especially thank Alan Cox, Nat Friedman, Raph Levien and Richard Stallman for reviewing the draft of this document. _________________________________________________________________ Resources bonobo: The GNOME team has learned that the Bonobo, the primate closest to humans, is an endangered species. If you want to know more about how you can help save the Bonobos, check this web page: http://www.gsu.edu/~wwwbpf/bpf/ GIMP: http://www.gimp.org/ GNU: http://www.gnu.org/ GTK+: http://www.gtk.org/ GNOME: http://www.gnome.org/ Gnumeric: http://www.gnome.org/gnumeric/ gnome-print: http://www.levien.com/gnome/print-arch.html GWP: http://www.hungry.com/products/gwp/ OMG: http://www.omg.org/ ORBit: http://www.labs.redhat.com/orbit/ RHAD: http://www.labs.redhat.com/ Themes: http://www.labs.redhat.com/themes/ Tom Tromey: http://www.cygnus.com/~tromey/gnome/metadata.html Y: http://www.hungry.com/ _________________________________________________________________ Copyright © 1998, Miguel de Icaza Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette... making Linux just a little more fun!" _________________________________________________________________ IMAP on Linux: A Practical Guide By David Jao _________________________________________________________________ ABSTRACT: The Internet Mail Access Protocol, Version 4rev1 (IMAP4rev1), allows users to access and maintain hierarchical collections of e-mail folders on a remote server over the Internet. The "client-server" nature of the IMAP paradigm allows e-mail programs to enjoy the same benefits of portability and network transparency that graphical programs have gained from the X11 Windowing system. In this article, we describe how to set up client and server software on Linux to use IMAP for managing your mail. In addition, we explain the benefits and drawbacks of IMAP, and discuss when and under what situations it makes sense to use IMAP. 1. Why IMAP? How do you read your e-mail today? Most likely, you start up a program like pine or Netscape to read your mail. You probably have only one Inbox for each e-mail account you own. Since a few month's worth of accumulated e-mail is much too unwieldy for a single Inbox, your mail messages are almost certainly organized into separate mail folders for easy cataloging and maintenance. Unless you use IMAP already, these mail folders are sitting on your local disk (or in your home directory on a remote account). However, there are a number of problems with storing mail folders on a local disk: * With a text-based mail client, you have to log in to the account that holds your mail folders in order to check your mail. This is not so bad if you have one account, but it can be tough juggling multiple accounts this way. For example, try moving a large number of messages from a folder in one account to a folder in another account. * With a graphical mail client, it can be difficult or impossible to manage your mail over a low bandwidth link. This point merits consideration since many people prefer graphical clients and have low bandwidth links. * It's not very easy to switch clients when all your mail folders are formatted for one particular program. Many users are finding it increasingly useful to be able to tailor their choice of mail client to best suit their current situation. IMAP solves all these problems at once. The simple idea behind IMAP is that mail folders are stored on a central server and accessed via a commoditized, widely supported protocol. Using IMAP, you can: * access your mail folders from any machine, anywhere, as long as an IMAP client is installed, * manage multiple mail folders belonging to multiple e-mail accounts from a single client, * switch mail clients (Netscape, pine, Eudora) at will, and automatically carry all your mail folders with you. The analogy to the X11 windowing protocol is helpful. In MS Windows, a graphical program running on a computer is inextricably bound to that computer's display. In contrast, under X, a program running on one machine can display itself on another machine through a well defined, commoditized protocol. The resulting network transparency is a critical advantage in today's highly interconnected world. IMAP offers the same kind of flexibility: your e-mail folders (that is, all the data you really care about) are stored on a central server, so that instead of being inextricably bound to one mail program on one machine, they can be transparently accessed over the network by any compliant program. 2. IMAP Server Installation So now you're psyched about IMAP and want to use it, right? The first step is to install an IMAP server. If your ISP already runs an IMAP server for you, then you might want to just use their server instead. An advantage of this route is that you can access your mail from anywhere without requiring your computer to be on. A disadvantage is that you have to dial in to your ISP to access your mail. In any case, most ISPs don't provide IMAP services, so you'll most likely have to run IMAP on your own computer anyway. Without further ado, here's a quick and dirty set of instructions for installing the University of Washington IMAP server. First, get and extract the latest version (4.4 as of this writing): [root@localhost ~]# lynx ftp://ftp.cac.washington.edu/imap/imap-4.4.tar.Z [root@localhost ~]# tar xzvf imap-4.4.tar.Z [root@localhost ~]# cd imap-4.4 Type one of "make lnx", "make sl5", "make slx". The first is for traditional systems, the second is for systems using libc5 and shadow passwords, and the third is for glibc-based systems that use shadow passwords. [root@localhost imap-4.4]# make lnx Install the newly compiled file: [root@localhost imap-4.4]# install -s -m 755 -o root -g mail imapd/imapd /usr/s bin Add the following line to your /etc/inetd.conf (it may already be there; if so, uncomment it out): imap stream tcp nowait root /usr/sbin/tcpd /usr/sbin/imapd Set up your hosts.allow and hosts.deny files to restrict IMAP access to authorized domains only. This step is highly recommended, as the University of Washington IMAP server has had some fairly serious security vulnerabilities in the past. In /etc/hosts.deny add the line imapd: ALL In /etc/hosts.allow add the machines and domains that you want to allow to access your IMAP server: imapd: your.local.host.com imapd: .yourisp.com imapd: .yourschool.edu Finally, restart inetd and your server is ready to go: [root@localhost ~]# killall -HUP inetd 2.1. Distribution-Specific Installation Instructions If you are running a Linux distribution that comes with a package manager, you can install a precompiled IMAP server if you want. RedHat 5.2 instructions: lynx ftp://ftp.redhat.com/pub/redhat/redhat-5.2/i386/RedHat/RPMS/imap-4.4-2.i38 6.rpm rpm -Uvh imap-4.4-2.i386.rpm Debian 2.0 instructions: lynx ftp://ftp.debian.org/debian/dists/stable/main/binary-i386/mail/imap_4.2-1. deb dpkg -i imap_4.2-1.deb After installing these packages, you'll still have to go back and edit /etc/inetd.conf, /etc/hosts.deny, and /etc/hosts.allow yourself as described above. 3. IMAP Client Configuration Once you've set up your server, configuring an IMAP client to use the server is a snap. The basic procedure is: * Pick a directory on the server system to hold all your mail folders. You need to have read and write access to this directory. I usually use $HOME/Mail. Create this directory if it doesn't exist. * Tell your IMAP client the name of your IMAP server, your username on that server, and the directory above where your mail folders live. * Now you can create and delete remote folders, and move messages to and from remote folders, just as if they were local folders, using the same techniques that you already use in your mail program to manipulate local folders. Here's three examples of programs that I actually use: 3.1. Pine 4.05 Pine is available from http://www.washington.edu/pine/. It is very popular in the Unix world. The 4.0x versions added support for online IMAP folder access. To configure pine, press S to enter Setup, L to configure your collection list, and then A to add a collection. Enter your server, username, and mail folder directory as described above. Simple, isn't it? Pine supports multiple IMAP collections, so you can add as many as you want and manage them all from one place. Pine screenshot Screenshot of pine configuration 3.2. Netscape Communicator 4.07 Netscape Communicator is an integrated web browser and Mail/News reader that is in fairly widespread use today. The 4.07 version is suitable for light mail processing, but it will crash if you give it a folder with well over 1000 messages (try it). Netscape Communicator is available from http://home.netscape.com/. To set Netscape up for IMAP, select Preferences under the "Edit" menu, expand the "Mail & News" tab, click on the "Mail Server" entry, and enter in your username and your IMAP server. Obviously, make sure the server type "IMAP4" is selected. Click on the "More Options" box and enter in the mail folder directory you selected above. Finally, make sure the "Move Deleted Messages to Trash" box is not checked; this feature is rather broken and IMAP already provides flags to deal with deleted messages. Netscape 4.0x does not support multiple IMAP collections, and it cannot automatically copy sent mail to a remote IMAP folder. Netscape 4.5 does support these things, but I have found the IMAP client in Netscape 4.5 to be far too unstable for real work. Netscape screenshot Screenshot of Netscape configuration 3.3. TkRat 1.2 TkRat is my favorite graphical mail client right now. It also happens to be the only Open Source IMAP client I know (it's licensed under a BSD style license). It is available from http://www.dtek.chalmers.se/~maf/ratatosk/. In TkRat, select "New/Edit Folder" from the Admin menu. Then select "IMAP Folders" from the Import menu, and type in your username, IMAP server, and a wildcard matching the folders in your mail folder directory. Note that TkRat expects a wildcard rather than a directory. TkRat screenshot Screenshot of TkRat configuration 4. Important Usage Notes Here's some things about IMAP that are not obvious, but are very useful to know. 4.1. Folder hierarchies Currently, a limitation of the UW IMAP server is that a folder cannot contain both messages and subfolders. That is, a folder can either contain subfolders, or messages, but not both. To specify a folder that contains subfolders, you need to add a / to the end of its name. Here's some examples: * Courses/ is a folder that can only contain subfolders. * Courses/Calculus is a subfolder of Courses/. It can only contain messages. * Courses/Languages/ is a subfolder of Courses/ that can only contain further subfolders. 4.2. The Inbox The folder name INBOX, Inbox, or any capitalization thereof, is reserved for your inbox. You can't create a folder of your own with this name. 5. Security Considerations Running an IMAP server adds another system daemon, and thus, another potential security vulnerability. If you're not going to make use of the capabilities of IMAP, you're probably better off not installing it. A separate issue is the use of plaintext passwords for logins and authentication. Like most services, IMAP sessions are sent as plaintext over the Internet. Many people feel that sending passwords over the Internet as plaintext is no big deal. These people tend to use telnet, ftp, POP3, etc. without reservations. However, if you don't like sending your password over the Internet unprotected, you have precious few options: * Use Netscape Messaging Server, which supports IMAP over SSL. Unfortunately, there's no Linux version available, and the software costs $1295 besides. * Compile the Cyrus IMAP Server with Kerberos authentication support. * Use Secure Shell to transmit your IMAP session over an encrypted tunnel. * Install imp (a web-to-IMAP gateway) on your machine and access it through an SSL web server. Unfortunately, all of these techniques are beyond the scope of this article. The fact of the matter is, most of the data on the Internet is transmitted as plaintext these days. If it were easy to conceal this data, people would be doing it already. 6. Conclusion Fewer and fewer people are able to handle their daily volume of e-mail from one client on one machine all the time. While many are dealing with the e-mail mobility problem using the existing infrastructure of telnet, remote X displays, and distributed file systems, IMAP alone offers a comprehensive, application level solution tailored specifically for this need. By offering network transparency without sacrificing functionality, IMAP promises to revolutionize mobile mail access and change the way we read our mail for the better. I except that user demand will soon force IMAP support to be a required feature on all mail clients. In short, if you're really happy with the way you read your mail now, then you don't need to bother with IMAP, but if you're itching for some additional flexibility in managing your mail, you should definitely consider adopting IMAP. 7. Additional References IMAP4rev1 RFC A paper comparing IMAP and POP A long list of products supporting IMAP _________________________________________________________________ Copyright © 1998, David Jao Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ Linux Installation Primer, Part 4 By Ron Jenkins _________________________________________________________________ Copyright ® 1998 by Ron Jenkins. This work is provided on an "as is" basis. The author provides no warranty whatsoever, either express or implied, regarding the work, including warranties with respect to its merchantability or fitness for any particular purpose. The author welcomes corrections and suggestions. He can be reached by electronic mail at rjenkins@qni.com, or at his personal homepage: http://www.qni.com/~rjenkins/. Corrections, as well as updated versions of all of the author's works may be found at the URL listed above. NOTE: As you can see, I am moving to a new ISP. My old one changed to metered access, which makes the information superhighway a toll road. Please bear with me as I get everything in working order. The e-mail address is functional; the website will be operational hopefully around mid December or early January. MESSAGE TO MY READERS: I would like to thank you all for your kind comments, and constructive criticisms concerning my articles. I would also like to thank the staff of the Linux Gazette, Marjorie in particular, for giving an unskilled goofball like me a chance to publish my scribbling. Keep those e-mails and questions coming! SEQUENCE OF UPCOMING ARTICLES CHANGE: To preclude a flood of e-mail on the subject, I have decided to change the order in which my columns will run. I had originally intended to do the IP_Masq/Internet Gateway piece this month, but then it occurred to me - what good is an Internet gateway without a network? So, the new sequence for the next few months will be: This column Planning a home network. Deploying a home network. IP_Masq/Internet Gateway. If you can't wait that long, and have a need for the Internet Gateway stuff, just drop me an e-mail. Part Five: Planning a Home Network In this installment, we will address some of the issues necessary to plan a home network. We will cover most of the issues that you will encounter, and perhaps a few you had not thought of. Finally I will walk you through the steps to creating an effective and optimal Network Plan. As with each installment of this series, there will be some operations required by each distribution that may or may not be different in another. I will diverge from the generalized information when necessary, as always. In this installment, I will cover the following topics: 1. Do I need a home network or not? 2. Some background theory on Ethernet and TCP/IP. 3. Choosing a Topology. 4. Choosing a NIC. 5. IP issues - Reserved or Proper IP addresses. 6. WAN connection issues. 7. Planning the network - Physical vs. Logical layout. 8. Planning ahead for easy administration. 9. Deciding what services you require. 10. Disaster Recovery and Fault Tolerance issues. 11. Bringing it all together. 12. References. 13. Resources for further information. 14. About the Author. Do I need a home network or not? This is a relatively easy question to answer. If you have more than one computer, you can certainly benefit by networking your boxes together. If you have a SOHO or small business, you can benefit as well. You might ask, "Why do I need a network?" Some possible answers include: Integration of common services such as file sharing so that your documents are stored on a single machine, which in turn allows all or some of your users access. Consolidation of all documents and data, eliminating the "Who's got the latest version of this freaking spreadsheet or document?" The ability to create internal discussion forums, as well as access to newsgroups either in real time or off line relevant to your business or personal interests. Consolidated Internet access for everyone where only one modem is required. Fax and scanner access from all your workstations. The desire to learn more about networking in general and Unix networking in particular providing you with new marketable skills. Some background theory on Ethernet and TCP/IP. For an overview of TCP/IP and networking, see my article in last month's issue. Briefly, to network two or more computers, three things are required: 1. A Network Interface Card (NIC) which is installed in the computer, and provides the physical as well as the logical (more on this later) connection to the network. 2. A medium to exchange information from machine to machine. See Topology below. 3. A common protocol to transport the data from machine to machine. In our case, TCP/IP. Choosing a Topology. Crucial to the proper performance of your network is the topology you choose. There are many different topologies available, but for the purpose of your installation, I will confine the choices to the two most common topologies - 10BASET and 10BASE2, or more appropriately a star network versus a bus network, respectively. Pros and Con's of the two different topologies: 10BASET: Pro's: Uses unshielded twisted pair (UTP) wiring. Is a point to point topology, meaning if any node (computer) on the network goes down, the rest are unaffected. Con's: Requires the use of a hub as a common connection point. Wiring is more difficult, since each node (computer) requires a separate connection to the central hub. More expensive than 10BASE2. 10BASE2: Pro's: Uses easily available cheap coaxial cable forming a "bus" to connect all nodes. No hub or extra equipment required. Is easy and simple to wire. Costs significantly less than a 10BASET topology. Con's: If the bus goes down, the entire network goes with it. Requires proper termination at both ends of the bus (basically two fancy 50-Ohm resistors). A termination problem can bring down the whole network. Finally, another point to consider - mixed topologies are often used to accomplish different objectives. For instance, say you have an office set up in the basement that contains many workstations that are physically close together. Upstairs you have 3 computers used by your family in disparate locations. The solution - downstairs you use a star (10BASET) this provides better fault tolerance for your business machines. Upstairs you use a bus (10BASE2) to simplify wiring issues. To tie it all together, you run a 10BASE2 cable downstairs, extending the bus to the downstairs machines and hook it up to the hub. You can then access your "office" downstairs, to get your work done, and the business machines can contact you e-mailing you until they feel happy. Voila! NOTE: When determining the length of coaxial cable, remember that the cable will run from machine to machine, not in one long piece. If you are going with UTP, depending on the size of your installation and amount of cable required, you may or may not want to look into purchasing the cable in bulk, purchasing some RJ-45 plugs, a crimping tool and do it your self. Choosing a NIC. This can be a tricky one. Almost everyone is tempted to buy the cheap clone cards, and sometimes it works, sometimes it does not. At least specifically ask if the card can disable the plug-n-pray features, as you may or may not need to explicitly set the IO address, as well as the IRQ. This mostly applies to the ISA based cards. Most PCI cards can be autoprobed if you are using kernel 2.0.34>. I like the 3Com products. They cost a little more, but it's worth it in the long run. For an ISA bus, I like the 509B. For a PCI bus, I like the 905 series. Also the PCI NE2000's are known to work. Also, the type of NIC you buy is largely determined by your topology choice. I recommend getting a "combo" card which contains both a 10BASET as well as a 10BASE2 interface. This lets you connect to either topology, and is a prudent measure. As you will soon see networks are never a finished product, but rather a constantly changing, ever evolving project. Getting a combo card will give you maximum flexibility as your network changes. And it will. A final note - NIC's are measured in the amount of bit space they can transfer data. Common to most Ethernet cards is 8, 16, and 32 bits. The higher the number the better. 8 and 16 bit cards are usually ISA cards. The 32 bit cards are PCI. IP issues - Reserved or Proper IP addresses. The next thing you will need to determine is the adressing scheme you will use on your network. I always tell my clients that getting Proper IP adresses (a block of IP's purchased from your ISP) is the best way to go, but it does cost more. This is usually referred to as a dedicated connection and costs more than a regular dialup account. The advantages of a dedicated connection means your ISP will set aside one of their modems for your personal use. This, along with the IP addresses set aside for your personal use, account for the higher pricing. Also, a dedicated connection allows you to have as many e-mail addresses as you want, put up your own website or sites, and for $74.00, your own domain on the Internet. This will give friends clients or browsers a permanent way of contacting you, obtaining information on your products or services, or a virtual gathering place for your family to let them keep in touch. As you and your family exchange more and more information, it can ultimately become the central point for family news, organizing events, and keeping current on things without those $50.00 phone calls everyone makes around Thanksgiving and Christmas. More commonly, people want to used Reserved IP's - certain subnets, set aside to be used for this sort of service, and are not routable unless they pass through a gateway machine, or proxy, which effectively hides the interior network (usually 192.168.x.x) from the outside world making all your machines appear to the outside world as the gateway machine. The downside to this is that using this scheme, you will only have one e-mail address, the one you got at the time of your sign up. However, many ISP's offer dialup accounts with more than one e-mail address, and some even allow concurrent connections (this means you can have more than one modem connected at the same time.) Check around in your area for this kind of service. It will probably cost more, but not as much as the dedicated connection option. Finally, try to get a "static IP" address instead of a "dynamic" one. This will allow you to put up a webserver for personal use, or to advertise your business. Without a static IP, it is very difficult to do much more than pull from the Internet, you will not be able to push much more than e-mail. Before I get bombed with e-mail about dynamic IP hacks, scripts that can post your current IP, etc. Please keep in mind that the purpose of this series is to provide new users of the Linux operating system as many services and options as possible, while keeping the configuration and deployment as easy as possible. As the series progresses, and our skill levels improve, I will begin to go a little deeper into the details and tuning and tweaking. WAN connection issues. This is primarily a budgeting issue. Briefly you have two dialup choices, and for dedicated connections, you have three. Outlined below you will find the various choices compared and contrasted, along with my recommendations of what I usually choose. Dialup Choices: 1. A standard modem, 33.6Kbps or less. (What about 56k? I have not seen any so far that are not just a telephone interface and a impedance transformer, with all the "modem" work being done by your CPU. This is like P-N-P on steroids. If anyone has sucessfully used one, I would love to hear about it.) This is suitable for small networks, <=5 users, who will be using the Internet sporadically. This option costs the least. Requires a computer to function. 2. An ISDN modem, and ISDN line. This option is best for networks of <=25 users, or power users who are on the net most all of the time, and doing many tasks simultaneously. I can and have soaked one of these all buy myself. But then again, I have nowhere to go and all day to get there. :-) This option will give you a true steady throughput of slightly less than 128Kbps. This option will require an additional ISDN line to be purchased, In my area, it runs $112.00 per month for unlimited time. There are metered usage plans that can run as low as $40.00 per month. This might make sense for you if you and your network will be sporadic users, but be warned - speed is addictive, and you may find your sporadic use goes way up. Additionally, your ISP connection charge may or may not be more. Requires a computer to function Dedicated Choices: Here you have both of the options above, and an additional one described below. A dedicated router. This device takes care of the connection to your ISP, automatically redial if the link fails, and offers firewall and many other security features. It is an independent device, so no computer is required. All you need is the router and the ISDN line. Costs range from ~$100.00 - $800.00. I use the Ascend Pipeline 50, which as I recall cost about $600.00 when I bought it three years ago. This is the best choice for people with a dedicated connection, who plan to do business on the web as well as provide Internet access to their end users. Otherwise, it's probably overkill. This is the easiest, quickest, most reliable way to manage your connection. Can be set to dial on demand, from your network out, as well as from the Internet in. This may save you some money if you are on a metered usage plan. Your ISP charges will definitely be higher. In my area, a dedicated ISDN account ranges from ~$150.00 - $300.00 per month. Planning the network - Physical vs. Logical layout. There are two things to consider when planning a network the physical layout (where the machines are, where and how the cable will be installed, which machines will provide which services, etc.) And the Logical layout (how the data actually flows, and how each machine interacts with the network, usually expressed in a hierarchical manner.) For instance, say you have a network consisting of four workstations, two on each side of another three machines, a fileserver, an Internet gateway, and a DNS server, all connected to each other by a bus (10BASE2) architecture. Physically, you have 2 workstations, the file server, gateway, DNS, and two more work stations. Logically, you have four levels to your network - at the top you have your bus (since any interaction requires the bus to operate,) at the second tier, you have the Internet gateway and the DNS machines (since all machines require DNS to "find" each other, and DNS needs the gateway for name requests it cannot resolve,) at the third tier, you have the fileserver (since all the workstations need access to this machine, but it should not interact with the outside world for security reasons,) and finally at the fourth level, you have your workstations. Planning both the physical and logical layout of your network is crucial to the effectiveness and performance of the network. On the physical side, you need to plan where your cabling will be, and pay particular attention to how it is placed. You will need to include in your plan entry and exit points if necessary and how you can best arrange the cables to run together and how you will bundle and anchor them. You will also need to consider the placement of any other network devices such as hubs or routers to keep the distance from the device to the machines that will connect to it to assure you will use the shortest length of cabling possible. On the logical side, check and recheck your logical layout to make sure you are placing your machines in the proper logical positions that will provide maximum performance and minimum interaction problems. Looking at your network logically may point out some problems not apparent in the physical layout. Planning ahead for easy administration. Now we come to one of the two things most people do not or will not do, but are crucial to effective management of your network. You will need to do a thorough and complete inventory of all your hardware. At the bare minimum, you should collect the following information about every computer that will be connected to your network: 1. Make, model number, and manufacturer of the computer. 2. Type and speed of your CPU. 3. Amount of RAM. 4. Bus type. 5. Number and type of slots used/available. 6. The make, model, and manufacturer of each device inside your computer. 7. The IO and IRQ for each of the above devices. 8. Make, model, and manufacturer of you video card including the amount of RAM onboard. 9. Make, model, and manufacturer of your monitor. 10. What resolutions your monitor is capable of. 11. Type and size of floppy drive(s). 12. Type and size of hard disk drive(s). 13. Type, make and model of your mouse. 14. Make, model and manufacturer of any external devices. 15. Type and version of operating system(s). 16. Make, model, manufacturer and interface of your printer (if needed). 17. Make, model, manufacturer and interface of your backup device (if needed). Ideally, you should record everything, all the way down to the chipsets, but you can start with the above. I can hear everyone yelling "What good will this do me?" Well, consider this - if your computer has only 4 MB RAM, and is running some flavor of windows, you will need to add more RAM. Similarly, if some of your workstations contain only ISA slots, while others have both PCI and ISA slots, now is the time to find out. Not after you get back from the store with a bunch of PCI NIC's. The type and version of the operating system is very important. If you have any Novell boxes, they will require additional configuration and translation services. The same applies to some Mac's. Additionally, this time and effort will pay off in the long run when, not if, one of your machines starts misbehaving. Deciding what services you require. This is important as well, because the services you need will somewhat dictate how your network is set up. Some of the more popular things are listed below. You may or may not have additional requirements. 1. File Server - this will most likely be the first thing to think about. Consolidating access to your information was one of the reasons networks were invented. 2. Internet access - this is the second most common service required. This will allow all workstations to connect to the Internet. Depending on the type of connection, you may or may not be able to e-mail, offer ftp services, and web services to the outside world, as well as internally. This will require either a router or a computer dedicated to this purpose. If you are using a computer to provide access, some additional configuration and software may be necessary. 3. Name Resolution - some type of name resolution is required on any TCP/IP network. For smaller networks, you can simply use a hosts file to take care of this. If you have a dedicated connection, DNS is required. You must have two DNS machines to maintain your network information and when necessary, update the Internet root servers. Finally, if you are connecting through a dial up connection, you should probably consider running a caching nameserver from which all your network nodes obtain information, and in turn you instruct this machine to use your ISP's DNS servers. This will speed up things a bit on slower connections. 4. If you are in an all Unix shop, or a cross platform environment, you will probably want to use NFS and possibly Samba. The former can be used by Unix machines by default, and on windows boxes with additional software. The latter is used exclusively by windows clients, making the Linux machine appear as just another computer in your Network Neighborhood, and allows you to transfer files by simply dragging and dropping, just like copying files from one disk to another. 5. Sometimes it is advantageous to be able to execute programs on a remote machine, and have the results display on another workstation. Using telnet, you can execute any character mode programs, but often you will need and/or desire to run remote programs that require the X windowing system to function. Instructions for this can be found in the September issue of the Linux Gazette. 6. Another handy thing to run is a time server. This allows all your machines to synchronize to the National Institute of Standards and Technology (NIST) atomic clock in Ft. Collins, Colorado. Many Internet applications and services are very sensitive to time disparities, and you want your servers to be right on, for examining the logs for problems or unauthorized use. Disaster Recovery and Fault Tolerance issues. I know I keep harping on this subject throughout my columns, but it is crucial. You WILL need a backup device. Ideally, you should have a backup device on every workstation and server on your network. Practically, you can get by with one backup device, usually on the file server, or a machine dedicated to this function. When you purchase a backup device, make sure it is supported by Linux. Otherwise what you end up with is a very expensive bookend. This machine should have sufficient disk space to handle the spooling of your windows and Mac clients. Your Unix machines should be able to access the backup device remotely. Also, you need to define a backup schedule for both your end users, as well as the servers. At a minimum, you should have enough tapes or whatever your backup device uses, to perform daily backups Mon. - Fri. as well a weekly backup Sat. or Sun. for two weeks. This will at least allow you to go back two weeks when, not if, you or one of your end users finds out they need a file they deleted "Uhh, sometime last week ." Bringing it all together. You have chosen your topology, picked your NIC's, decided on the type of IP addresses you will use, decided on the type and speed of your Internet connection (if needed,) looked at your proposed network from both a physical and logical point of view, completed your hardware and software inventory, determined what services you will require, last, developed a backup schedule and are going to purchase a backup device (if needed.) "What do I now?" You check everything over and over. You want to make all your mistakes at the planning stage, not the deployment stage. Once you are satisfied with your plan, write it all down. What you need to purchase , as well as the things mentioned in this article. Then check it one more time. Finally, you can start shopping around for the best price on the things you will need. Here are a few general guidelines - when purchasing coaxial cable, don't buy it at a computer store. The kind of cable they sell is crap and noisy as all getout. Go to a ham (amateur) radio shop, and tell them you want RG-58A/U coax with BNC connectors on each end in the lengths you require. If a Ham shop is not available, go to Radio Shack, and look there, where I believe they offer 6, 8, 12, and 50 foot lengths. When purchasing your NIC's, look into bulk discounts. If you are buying at least four or five, there is often a price break. Stay tuned, and next month we are going to actually install and configure the network ! References: The System Administrators Guide The Network Administrator's Guide The NET-3 HOW-TO The Ethernet HOW-TO The IP_Masq mini HOW-TO The Hardware HOW-TO Resources for further information: http://sunsite.unc.edu/LDP/ http://www.ssc.com/ http://www.lantronix.com/ _________________________________________________________________ Previous ``Linux Installation Primer'' Columns Linux Installation Primer #1, September 1998 Linux Installation Primer #2, October 1998 Linux Installation Primer #3, November 1998 _________________________________________________________________ Copyright © 1998, Ron Jenkins Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ Linux - the Darling of Comdex 1998? By Norman M. Jacobowitz _________________________________________________________________ Once again the mega-computer show known as Comdex (http://www.comdex.com/) took over Las Vegas, Nevada, this past November 15 through 20th. On hand to represent the Linux community were 12 vendors who made up this year's Linux Pavilion: Linux Journal, Red Hat, S.u.S.E., Caldera, VA Research, Linux Hardware Solutions, Linux International, InfoMagic, Enhanced Software Technologies, Turbo Linux, Interix and ApplixWare. Special Linux-related events included the presentation of the first annual Linux Journal Editor's Choice Awards by our esteemed editor, Marjorie Richardson. As usual, there were throngs of corporate buyers, sellers and interested onlookers from nearly every nation on hand for the event. Hundreds of exhibits, from small, quiet displays of software to a real high-wire balancing act performed above the crowd, entertained and informed visitors. But there are several factors that set the recent Comdex apart from years past. Number one, there was a noticeable drop-off in business attendance. Several major corporations, including Netscape and Intel, either did not show up at all or rented small meeting spaces rather than building booths. Mirroring the corporate no-shows was the precipitous decline in individual attendance. The missing visitors were readily noticed -- taxi lines were shorter, hotel rooms were easily secured, etc. What makes Comdex 1998 stand out even more is the dramatic increase in the amount of attention that was received by Linux. Not only was the Linux Pavilion packed from the opening on Monday until the close on Friday, but other exhibitors had more to say about Linux during the course of the show. Evidence was everywhere that Linux is reaching past the IT departments at major corporations and getting the attention of management and other non-technical decision makers. This in turn meant that press attention was focused on Linux as never before. Several vendors in the Linux Pavilion were interviewed for a local TV news segment, while most major computer oriented print outlets made at least some mention of the Linux presence at Comdex. Even more impressive were the numbers of average computer users who approached vendors at the Linux Pavilion with an open mind and lots of questions ... and then walked away with a distribution CD! Linux International was distributing several different CD-ROMs and asking for a $1 donation. They "sold out" of CDs quite quickly, and were eventually rescued by the generosity of S.u.S.E. As a result of the efforts of LI and the rest of the Linux Pavilion, there are now perhaps as many as several thousand new Linux users. So, what does Comdex 1998 mean for the future of Linux? Well, based on my experience there and the people I spoke to, I believe we can expect several of the following events, if not all, to occur between now and the turn of the century: * Far more major companies will be porting their software to Linux. At Comdex, I was approached by many programmers and marketing types alike who were sent to the Pavilion to assess the potential for porting their wares to Linux. Look for a few surprises to come up in the next year; rumors were flying about various vendors currently alpha testing their products for Linux. * Even more hardware will be sold with native Linux drivers available, especially in the field of RAID controllers, now that Oracle is ported to Linux. Again, I spoke to many programmers sent by hardware vendors to seek out counsel and advice on writing drivers for Linux. * Linux will continue to grow in appeal to "end-user" types who are fed up with the inadequacies of proprietary, closed-source Operating Systems. Many a newcomer was exposed to Linux at Comdex; many of them will wind up long-term users. Look for this to emerge as a trend. * Major vendors will consider their Linux ventures to be a major strategic business move, not merely a sideline venture. At Comdex, many of Oracle's major announcements centered around their support for Linux and role of Linux in it's future. Look for more companies to expand into Linux in some capacity and proudly advertise and publicize those moves, rather than burying the Linux news under other announcements. * Linux-specific skills will become a hot resume item for programmers, system administraters, and other techie types in the job market. Many professionals from several different organizations asked me for personal assistance in helping them locate Linux-savvy professionals for their personnel pools; one of my friends now has a lucrative job with someone I met briefly at Comdex. * Linux will continue to improve, while certain major Operating Systems will see no such improvement, even as major new releases are published. Yes, this is an opinionated prognostication, but there is evidence to support such an assertion: few vendors at Comdex 1998 had anything "new" or dramatically improved to show. Their plight is not going to change overnight, no matter what kind of marketing hype surrounds their upcoming releases. In all fairness, there are some negative interpretations of the attention Linux received at Comdex. For one, the strong press attention could be somewhat explained by the very point made in the previous paragraph: because the big vendors like Microsoft didn't have any new mind-boggling toys to show off, the press had to look for news where it could find it. Linux was the biggest new thing to talk about. Plus, with attendance off and fewer vendors on hand, visitors had to look harder to find anything interesting to see at the show; it's possible they may not have come down to see us had their been more going on at the other Comdex venues. Yet the reception received by Linux vendors and enthusiasts at Comdex 1998 can only be described as overwhelmingly positive. As a final bit of evidence to support that claim, let me relate the following personal anecdote ... On the flight down to Las Vegas from Seattle, it was my pleasure to sit next to a Vice President from Microsoft. This gentleman was a pleasure to speak with about Microsoft, Open Source software and Linux. He was filled not with judgment and disdain, but genuine interest and thoughtful questions about what free software and Linux mean for the future of computing. Not only that, but he did assert that while companies like Microsoft are in business to make money, he himself is very interested in learning more about Linux and other free software. He said that many of his colleagues and contemporaries all over the business spectrum are equally intrigued. Something tells me his attitude is not unique ... Linux and Free/Open Source Software are poised to take a remarkable position in the future of computing and technology. With all of these facts taken into consideration, there is one logical conclusion: Comdex 1998 was one more step on Linux's way to complete world domination. _________________________________________________________________ Copyright © 1998, Norman M. Jacobowitz Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ My Hard Disk's Resurrection By René Tavera _________________________________________________________________ I'm not a hacker, or a computer genius, I'm just a common mortal who has a computer at home, work with computers at the office and usually do the same things mortals do on their home and work computers; well, almost the same things, I really don't like much playing computer games. As many others, I began using computers with commercial software (all right, let's admit it, I've been using the wintel type platform for years) and I thought there was nothing better. I can't say anything about a Mac, maybe some day I'll try one, but, few months ago, reading some messages on a bbs I found someone saying "....and here I am, happy with Linux...". -Linux?, What's that?- I thought, -maybe another game...- and I wasn't really interested on that, so I forgotten at all... almost. One fine day I asked him about that "Linux" thing, and the answer was a short explanation about the OS and some of the advantages on using it. My first impression was thinking that UNIX was for a super computer (I own an AMD K6/166, 32Mb RAM), for strange scientific applications or big companies, I thought I didn't need it, and after all, most people say that it's really hard to learn how to use it. I'm not a programmer, a scientist or so, no, I don't need that. But my curiosity was increasing and I was asking more people about Linux and I was surprised on the amount of people using it (I found a Linux users Group in my home city). The answers and stories were amazing and exciting, maybe I could give it a try. I bought a book that included a Slackware distribution CD. After reading the installation section, making a backup of my important information, learning (on the same book) how to use the fdisk program (I never thought I had to re-partition my hard disk, so I didn't care on learning how to do that) and a lot of pray and courage, installed the new OS in a second partition. All went really well and I've been learning about Linux and system administration since that day. I have installed and re-installed different distributions several times (Slackware, RedHat and S.u.S.E), having success on some items, but having to read more documentation and information sources on other ones to make things work. Sometimes I had frustrations (couldn't use my CD-ROM drive, graphic user interface, sound, printer, modem, floppy. etc.), I had to read a lot and make questions to the Users Group. At the end, the results really worth the effort. Frankly, I didn't abandon the wintel side, I was working with the well known commercial office suite on making documents, commercial graphic programs, sound applications, using my printer, etc..., the Linux side was only for navigating on the net, but, two months ago, my computer refused to start windows, I even couldn't start DOS. I started it from a floppy, looked for the C:\ drive and found it. What happened?, I ran the scandisk program getting a message about a sector damage and that the disk couldn't be repaired by the program, Oh no!, my hard disk was dead... -I still can take the guaranty and the vendor can repair or replace the hard disk...-, well, the damage was caused by a powercut during a storm, and they don't support that on the guaranty, so the solution could be a low-level formatting, but doing that could let the disk completely useless, so I took the computer back home, thinking that I would have to wait to have the money to buy a new disk. -Hey, wait a minute!, I didn't try Linux, It may works- and it really did perfectly so I had to decide, and I did it, save my information to floppy disks and use the hole disk space (2.1Gb) for Linux. Maybe some superior mind was trying to take me to the light. I've been learning more on using The OS and its applications. Now, I can print in full color with my Epson stylus 400 (ghostscript, ghostview, apsfilter), play sounds, midi files and CD-music with my pnp Yamaha soundcard (oss/linux sound driver), work with my .doc, .xls, .wks, .dbf, ... documents (StarOffice 4.0), manipulate, use and print a lot of graphic files (the Gimp), and of course, get connected to the world, sending and receiving email, faxes, files, etc. (Netscape, efax, ncftp), even I play some games. I can change the look and feel of the X Window environment every time I want, keep my secret and important information away and safe from intruders (kids), render some strange 3D scene while I compile a new program to work on my system and update my shares portfolio on the spreadsheet, taking the data directly from the internet, and receiving another new application from an ftp site. Next is learn on TV-cards, I have one and want to see my WallStreet News (MTV, Bay Watch and the Nanny too) on my home computer again, but using Linux. Also I want to learn how to set-up a LAN using TCP/IP, for a little home network (experimental purposes), and maybe for a later small business. I don't worry about the prices (all the applications I use came with the distributions or I got them from the net) and the legal stuff, almost everything I have installed is free software (mostly GNU Public License). Now I can solve a lot of problems in the office, and have nice talks with the systems guys, I can understand all what they say (as I said, I'm not a programmer or a hacker, I buy and sale shares, screaming and pushing people all day, but we use computers to get the orders and register the trades). As the post on the bbs said, ...and here I am, happy, with Linux... I'm still saving for another hard disk (and a UPS to prevent surprise powercuts)..., I admit it, I'm going to install (maybe) a win95 portion on that disk (it's easier to use for my wife, by now), but I can take my time, because my good old HDD was dead, and now, It's again alive. _________________________________________________________________ Copyright © 1998, René Tavera Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ Gaby and Notes-Mode Revisited Two Small Personal Databases for Linux ByLarry Ayers _________________________________________________________________ Introduction Though many full-fledged SQL database systems exist for Linux, both commercial and Open Source, these large client-server applications are overkill for managing a single user's personal data. Personal information managers such as Lotus Organizer have long been popular with users of mainstream OS's, while Preston Brown's Korganizer (a QT-based Organizer clone) and Ical (a Tcl/Tk calendar application) are popular with many Linux users. These applications for the most part combine a PIM with calendar and scheduling features. In my case, I have little need for the calendar, etc., but I do have quite a bit of information which I would like to make more manageable. In keeping with the unix tradition of small, specialized tools designed for specific tasks, this article concerns two applications which can help a Linux user organize and make more accessible personal data. Gaby Gaby, written by Frederic Peters, started as a simple address-book application written with the GTK toolkit. The name is an acronym, originally standing for Gaby Address Book of Yesterday; after further evolution of the program the author decided that the acronym could be generalized to Generic Astute Base of Yesterday. The further development was a result of the author's realization that he had created a simple database framework which could be used for other types of data. The "of yesterday" in the acronyms I take to be an acknowledgement that Gaby uses semicolon-delimited ASCII text as its data-storage format rather than the more complex, less portable, and often binary formats common in the big database systems. ASCII text as a data format has been around for quite a few years, but still can be useful for even quite large databases; see issue 34 of the Gazette for an article about NoSQL, which uses tab-delimited ASCII text as its format. As installed, the executable gaby is symlinked to gbc. Invoking gbc starts up Gaby as a bookshelf organizer rather than as the default address-book. Gaby can display two different views of the user's data files, which are stored in the directory ~/.gaby. In the most recent version of Gaby (0.2.3 as of late November of 1998) a user can create any sort of database with whatever fields are appropriate. This is a new, not completely implemented feature and the documentation is scanty at this point, so I'll present a quick overview of how it can be done. Begin by creating a new empty directory called /etc/gaby. In this example I'm creating a database of prairie plants native to my area. In the Gaby source distribution is a sample template file named desc.gtest. Copy this file to etc/gaby, then rename it so that the suffix relates in a mnemonic fashion to the subject-matter of your trial database. In this example I renamed the file to desc.plants with the command mv desc.test desc.plants. Edit this desc.[whatever] file, changing the field names to reflect the nature of your data. Next create a symbolic link in the /usr/local/bin directory (which is where Gaby is installed by default), linking gaby to plants (or whatever suffix you chose) with the command ln -s gaby plants. Now you can start Gaby by typing the name of your symlink and a customized Gaby window will appear with your new field names ready to be filled in. The default view is the Form window, which shows the first entry in the address or book data-file: Gaby Form Window Any of the entries can be viewed in this window by means of the icons or menu-items, and new items can be added. In the menu-bar of this window is a List menu-item, which allows the user to sort the various items alphabetically according to any of the fields. Another menu-item provides the ability to export a list to either LaTeX or HTML tabular format. The other window available is the List view, which is an overview or index of all entries in the file: Gaby List Window Gaby is a good example of a free software project which is beginning to gain momentum as users begin contributing enhancements and providing feedback.. This naturally stimulates the developer to further augment the program. Gaby appeals to me because rather than being a fixed-function program, it can be extended by its users so that it can be used in ways not imagined by the author. The current release of Gaby can be obtained from the Gaby web-site. _________________________________________________________________ Notes-mode Revisited In issue 22 of the Gazette I reviewed an add-on mode for GNU Emacs called notes-mode. This useful editor extension was written by John Heidemann in an effort to bring order to his collections of academic notes. The core of this mode is a collection of Perl scripts, some of which are intended to be run automatically as a daily cron job (these index the files and establish internal links), while others time-stamp and initialize a new note. While I was impressed at the time of my initial review with notes-mode's capabilities, I didn't succeed in making it work with XEmacs, which is my preferred editor. Recently John Heideman released version 1.16, which (thanks to contributions by Ramesh Govindan) now functions well with XEmacs. I've been using the mode extensively since then, and have found it to be useful beyond its intended purpose. Notes-mode was developed to help organize academic notes, but it serves me well as an organizer for notes on various subjects. Every day a new file can be initialized including whatever user-defined categories are desired. The system allows easy keyboard navigation between the various days' category entries, and a temporary buffer can be summoned composed of all entries under a selected heading. The effect is similar to using links in a HTML file, with the advantage that entries are devoid of mark-up tags and don't require a browser for viewing. Another HTML-like feature is external file-linking. Using code adapted from Bill Perry's W3 Emacs web-browser, an entry such as file:///home/layers/xxx.txt can be selected with the mouse or a keystroke, causing the file to be loaded into the Emacs session. PGP encryption of individual entries is also supported (using the MailCrypt Emacs/PGP interface). In a sense, Notes-mode is another sort of personal database optimized for subject- and date-based navigation. Its capabilities are orthogonal to those of Gaby. Notes-mode has the limitation of being fully useful only for users of Emacs or XEmacs, while Gaby can be run by anyone, though only in an X session. They both are ASCII-text based, ensuring that the data is fully portable and accessible by any editor or text-processing utility. Either or both of these programs can be invaluable to anyone needing to impose some order upon collections of information. Version 1.16 of Notes-mode can be downloaded from this WWW site. Complete documentation is included with the archive in several formats. _________________________________________________________________ Last modified: Sun 29 Nov 1998 _________________________________________________________________ Copyright © 1998, Larry Ayers Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ Product Review: Partition Magic 4.0 By Ray Marshall _________________________________________________________________ I recently used Partition Magic 4.0, and was quite impressed, although I did run into some interesting glitches. Background: My machine was (and still is) partitioned like this: * FAT32, containing Win95 * Extended partition + swap partition for Win95 + swap partition for Linux + /dev/hda7 - / + /dev/hda8 - /usr + /dev/hda9 - /usr/src + /dev/hda10 - /usr/local + /dev/hda11 - /home + /dev/hda12 - /wrk * I also had some unused space above /dev/hda12, that I had previously been unable to utilize. Not much; less then 100K. I very rarely run Win95. I use Linux for everything I do at home. Professionally, I am a software/knowledge engineer, using several different flavors of UNIX every day -- exclusively unix. Documentation: There was nothing in the PartitionMagic User Guide that was of any use to me. I opened it once, looking for references to either Linux or ext2 -- nothing in the Table of Contents -- nothing in the Index! I did find a few terse references, like "Ext2 is only used by Linux". While writing this, I decided to go through the PartitionMagic User Guide page-by-page, and see what I could find. Besides those few references, I found in Chapter3: Completing Hard Disk Operations, under Creating Partitions / Scenarios, a section titled Creating Linux Logical Partitions. Although this might be of some limited use to a neophyte, it might also lead them down a somewhat limiting path -- only a swap, and one other Linux partition. But, that's a judgment call, and beyond the scope of this article. Pasted onto the cover of the PartitionMagic User Guide, was a sticker that said: "UPGRADE - PREVIOUS INSTALLATION REQUIRED". So, I figured that PM would remove much of the old version, replacing it with the new one. I subsequently forgot about V3.0, until many hours later. Installation: I booted Win95, and started the PM4.0 installation. The installation went smoothly enough. Running it, however, yielded a few surprises. Execution: First off, I was very pleasantly surprised, and very impressed by the new GUI. There are several ways to select a partition, and to manipulate it. I particularly LOVE the way one can just move the whole partition (within the available space) back an forth. It was very intuitive. I give PowerQuest five stars (*****) for the GUI! With the GUI up, I merrily proceeded to make all of my desired adjustments, asked PM to Analyze them, and was given the go-ahead to implement them. But, to my surprise, when all was said and done (including an auto-reboot, and some complaints from my virus checker), only my Win95's C: partition was altered. :-( It was not very nice of PM, to tell me that everything was OK, and then ONLY make ONE of my changes. It was also fortunate that I had decided to check the results with PM, before rebooting to Linux. I proceeded to make all of the adjustments in the Extended partition. Notice, that I said ALL adjustments. That meant changing the sizes and locations of every remaining partition. I only realized after the next (unexpected) reboot that I had again wasted more time -- that only Win95's swap partition actually got adjusted. :-( This time, though, I just modified my Linux swap, and root partitions. When it was done, no reboot. I then adjusted all of the rest of my Linux partitions! (Remember, this was the third time I had done them.) But, my tests of patience were not over. While it was chunking away, I got several 120? (I forget the last digit, maybe 4) error popups. This error is NOT in the User Guide. So, I prayed that it wasn't serious, and clicked on OK. [Subsequently I have looked for that error on their web site. So far, I have not been able to find it.] About two thirds of the way through the implementation of my changes, all activity on the status window stopped, right in the middle of processing the /usr partition, where the bulk of Linux lives. Rebooting at that point would have been disastrous! Hoping that this was not one of those frequent Win95 unrecoverable hangs, I decided to go to the store -- I needed some groceries, anyway. And, I needed some fresh, cold, night air, in order to relax. I returned about 45 minutes later, only to find the status window exactly as I had left it. I suddenly noticed that the "NUM LOCK" light was on, and since I never leave it that way, I automatically pressed the Num Lock key to turn it off. And, to my surprise, and extreme pleasure, the status started to change. Finally it completed! It looked good. Now I had room in /usr to upgrade to RedHat 5.2. So, I reboot to Linux. Rebooting to Linux: WHOOPS! Linux didn't come up! At the point where I should have seen a "LILO boot:" prompt, I only saw "LI", and everything stopped. Everything except the fans, of course. I tried another lilo diskette. Same thing. I tried the RedHat Boot Diskette (Release 5.1). It said that it didn't support the rescue operation, and that I needed the diskettes that I created when I installed 5.1. I was sure glad I had done so, even though I had never had to use them before now. After a brief search for those diskettes, I finally find them. I tried the "Boot image" disk first. No good. I tried the "Primary Boot Disk" next, and cheers abounded! Linux was now up (and maybe my neighbors, too), although on a kernel with reduced functionality. But I was then able to rebuild my lilo diskette, and then reboot normally, everything working as expected. Additional notes: Remember my previous reference to "UPGRADE"? Well, I examined the /win partition from Linux, and I found that PM3.0 was still in the "Start Menu", and that PM3.0 used up 4.92 Meg of disk space in /win/pqmagic, i.e. it was still there. So, the "upgrade" was actually an "install". And, now I have 4.92 Meg of space wasted on my C: partition. I hope I remember to remove 3.0, when I reboot back to Win95 in another month or six. I also mounted the CD under Linux, and discovered that there is a LINUX directory. I wonder why I wasn't told about that before. Examining it's contents, I discovered files named PQINST.SH and PQREADME.NOW. Reading them, I saw problems with both files. * In PQREADME.NOW it stated "Please remember linux is case sensitive." And yet, it refers to items on the CD, using the wrong case. Just a couple of examples (one from each file): cp /pqtemp.ins/cdrom/linux/bootflpy.dat /dev/fd0 should be cp /pqtemp.ins/cdrom/LINUX/BOOTFLPY.DAT /dev/fd0 and cp /pqtemp/linux/bootflpy.dat /dev/fd0 should be cp /pqtemp/LINUX/BOOTFLPY.DAT /dev/fd0 I manually performed the cp commands (with the correct case). I then booted from them, to see what would happen. Experience with the Linux boot diskettes: When I booted the "Boot Diskette", it turned out to be a form of DOS from Caldera. This experience was less then optimal. Before the GUI came up, it appeared to stop loading, and there was a sound coming out of my PC, something like a horse running in the distance. There was also a black rectangle in the middle of my screen. I suppose there was text in that rectangle. But, it too, must have been black. I pressed , and there was a very brief pause in the sound, and the black rectangle flickered. So I pressed it many times, and eventually a slightly abbreviated form of the GUI appeared. Although most of the GUI was there, the helpers at the bottom were not. I guess that made sense, since there was no mouse pointer either. The lack of a mouse, made it a bit cumbersome to use, i.e. usable, but not optimal -- especially without the ability to have it analyze my proposed changes. That strange sound, combined with the black rectangle, occurred several other times, while I was trying various features. Again, I pressed and prayed, until the black rectangle went away. Since I had no idea what was happening when I just pressed , I elected to just quit, and boot back to Linux without implementing my changes. Trial with Wine: Wine is a Linux program, within which we can run a lot of Win95 programs. It is still under development, so many programs do not yet work, or they function with aberrant behavior. It took me a while to discover that PM's executable is: /win/Program Files/PowerQuest/PartitionMagic4/Win9X/Pm409x.exe When I tried it under Wine, it didn't run at all. Quite literally, it crashed with a segfault. I suspect the problem is in Wine, or with something very unusual that PM does.. Conclusion: In spite of the problems I encountered, I still consider PartitionMagic4 an invaluable tool for the Linux community. For the average "User", i.e. those who just use the system as a tool, and don't want anything to do with changing its configuration; it seems to me that they MIGHT have a need to use PartitionMagic just once, IF they didn't allocate their partitions adequately to begin with. But, after that, they may never need it again. So, for them, I can not in good conscience, recommend the $69.95 (plus $6 shipping) expenditure. Besides, they might have much more difficulty getting rebooted back to Linux. But, for the hundreds (or maybe even thousands) of us who actually get into the system, move stuff around, and generally push the envelope of Linux, $69.95 is not really that much to pay, for the ease with which PartitionMagic allows one to adjust disk partition tables to meet changing needs. Since I had purchased version 3.0 almost two years ago, and therefore was able to upgrade for only $29.95 (plus $6 shipping), it was much easier to justify the expenditure. One final note: On the 8th of November (almost 3 weeks ago) I sent much of what I've documented above, to Customer Service at PowerQuest, imforming them that I was going to submit this to the Linux Gazette. I have yet to receive any reply. _________________________________________________________________ Copyright © 1998, Ray Marshall Published in Issue 35 of Linux Gazette, December 1998 _________________________________________________________________ [ TABLE OF CONTENTS ] [ FRONT PAGE ] Back Next _________________________________________________________________ "Linux Gazette...making Linux just a little more fun!" _________________________________________________________________ Quick and Dirty RAID Information By Eugene Blanchard _________________________________________________________________ If you are thinking about implementing a Linux software raid then here is the most important link that you should investigate before you start: Linas Vepsta's raid page: http://linas.org/linux/raid.html The date of this posting is Oct 29/98 and the present raid documentation is incomplete and confusing. This posting is to clear up problems that you will encounter implementing raid0 and raid1. I wanted to implement mirror over striping. The striping gives good read/write performance increases and the mirroring gives backup and read performance increases. I started with kernel 2.0.30 and implemented raid0 (striping). Then I upgraded my kernel to 2.0.35 and the fun began. After struggling to get raid0 working with 2.0.35, I tackled raid1. Well, guess what, throw everything that you learned about raid out the window and start from scratch! A good idea is to start simple, get raid0 up and running then add raid1. The story begins: Raid0 (striping) with kernel 2.0.30 Linear and raid0 (striping) are implemented in the kernel since 2.x. You have to recompile your kernel with multiple devices installed. I recommend installing it in the kernel to start. You will have enough problems without implementing it as a module. To check if you have multiple devices installed. dmesg |more and look to see if you have the md dirver loaded and raid0 registered (can't remember the exact phrase - late at night ;-( ) Or type cat /proc/mdstat to see the status of your md devices. You should see /dev/md0 to /dev/md3 inactive. Strangely, the kernel tools mdtools-0.35 are not usually supplied with distributions. These are the tools that are required for setting up the raid, running and stopping it. You can find them on the Slackware distribution at (23k in size) http://sunsite.unc.edu/pub/Linux/distributions/slackware/slakware/ap1/ md.tgz Download to /usr/local/src then: cd / tar -zxvf /usr/local/src/md.tgz It will put the files in the correct place. sbin/mdadd sbin/mdcreate usr/etc/mdtab install/doinst.sh usr/man/man5/mdtab.5.gz usr/man/man8/mdadd.8.gz usr/man/man8/mdcreate.8.gz usr/doc/md/COPYING usr/doc/md/ChangeLog usr/doc/md/README usr/doc/md/md_FAQ Read through the README file (ignore warnings of course) The documentation is quite good for kernel 2.0.30 and linear /raid0 mode. The Linux Journal (June or July 98) has an excellent article on how to implement raid0 (striping). It was what spiked my interest. The Linux Gazette has another article that helps: http://www.ssc.com/lg/issue17/raid.html You should start the raid array before fsck -a, usually located in /etc/rc.d/rc.s for slackware distributions and should stop the raid array in both /etc/rc.d/rc.0 and rc.6. (BTW since they are identical files in slackware, can't we just do a softlink from one to the other and modify only one?) To check to see if it is working, type cat /proc/mdstat, it should indicate what states the md devices are (/dev/md0 raid0 using /dev/sda1 and /dev/sdb1). Test, test, test your raid. Shutdown, power-up, see if it is working like you expected. I did some fancy copying using cp -rap switches to copy complete directory structures to the raid arrays. Then modified /etc/fstab to include the new drives. Swap partitions do not need to be striped. They are automatically striped if a priority is used. Check the Software-RAID-mini-HOWTO and the Bonehead question section for details. It is amazingly simple. Implement UPS NOW! If you lose power (AC line), you will lose your raid array and any data that is on it! You should implement a UPS backup power supply. The purpose of the UPS is to keep your system running for a short period of time during brownouts and power fails. The UPS should inform your system that the power has failed through a serial port. There is a daemon that runs in the background that monitors the serial port. When it is informed that there is a power failure, it will wait a preset period of time (usually 5 minutes) than perform a system shutdown. The idea is that after 5 minutes of no power, the power will be down for a long time. Most Linux distributions come with the basic UPS daemon powerd. Check "man powerd" for more info. It is a simple daemon that is implemented in /etc/inittab under what happens when the power fails. Basically, a dumb UPS, just closes a relay contact that is connected to the serial port. powerd monitors to see if the contact has closed. If it does it shuts down the PC after a predetermined time, warns users and can send an email to root. I used an APC smart UPS that communicates through the serial port. There is an excellent daemon called apcupsd that works like a charm. It is located here. Please read the notice and sympathize with the author, he has done an excellent job (kudos to the author!). The installation works like a charm and the documentation is excellent. http://www.dyer.vanderbilt.edu/server/apcupsd/ RAID0 and 2.0.31 to 2.0.34 Don't have a clue. I upgraded from 2.0.30 to 2.0.35 because 2.0.35 is the latest stable release. RAID0 and Kernel 2.0.35 The mdtools compiled perfectly on my home machine (testbed running 2.0.30) but would not compile on my work machine (upgraded to 2.0.35). I kept getting an error about MD_Version (can't remember the exact name) not being defined. After a lot of head scratching and searching, I found that /usr/src/include/md.h contains the version number of the md driver. With version 2.0.30, it was ver 0.35, with 2.0.35 it is ver 0.36. If you "mdadd -V" it will indicate the version of md that mdadd will work with. So I had the wrong mdtools version. Here is the location of the correct version: ftp://ftp.kernel.org/pub/linux/daemons/raid/raidtools-0.41.tar.gz Download to /usr/local/src then tar -zxvf raidtools-0.41.tar.gz A new directory will be made /usr/local/src/raidtools-0.41 Change to the new directory and read the INSTALL file, then ./configure I can't remember if I had to then make and make install after this. I can't duplicate this now that I've upgraded to a new raid patch. You should have a new mkraid and mdadd binary. Type mdadd -V to check if your binaries are updated. It should respond with something that says something like mdadd 0.3d compiled for raidtools-0.41. Then read the QuickStart.RAID for the latest info. For raid0, not much has changed from the previous versions. RAID1 and Kernel 2.0.35 You must patch the kernel to enable RAID 1, 4 and 5. The patch is located at ftp://ftp.kernel.org/pub/linux/daemons/raid/alpha/raid0145-19981005-c- 2.0.35.tz Copy to /usr/src directory and uncompress the patch: tar -zxvf raid0145-19981005-c-2.0.35.tz Note the patch will be looking for /usr/src/linux-2.0.35 directory. If you have your 2.0.35 source installed as /usr/src/linux, you should mv /usr/src/linux /usr/src/linux-2.0.35 and soft link /usr/src/linux to it. ln -s /usr/src/linux-2.0.35 /usr/src/linux To apply the patch, in /usr/src: patch -p0